Abstract
This paper presents an innovative algorithm to calculate the displacement and stress fields within a multilayered pavement system using layered elastic theory and Hankel and Laplace integral transforms. In particular, a recurrence relationship, which links the Hankel transform of displacements and stresses at any point P(r,z) within a multilayered pavement system with those at the surface point, Q(r,0), is systematically derived. The Hankel transforms of displacements and stresses at any point within a multilayered pavement system can be explicitly determined using the derived recurrence relationships, and the subsequent inverse Hankel transforms give the displacements and stresses at the point of interest. Theoretical and computational verification of the proposed algorithm justify its correctness. The proposed algorithm does not use a numerical linear system solver employed in the traditional approach to solve the axisymmetric problems in multilayered pavement systems. Because of the explicitly derived recurrence relationships for displacements and stresses, the proposed algorithm provides a more rapid solution time than the stress-function-based approach utilized in existing layered elastic theory programs.
Introduction
In civil engineering, pavement design relies heavily on predicting how a complex "sandwich" of materials—including soil, base, and surface layers—will deform under traffic loads. This is typically modeled using Layered Elastic Theory (LET). However, modern design standards, such as the AASHTO Mechanistic-Empirical Design Guide, require millions of calculations to simulate a pavement’s entire lifespan.
Traditional methods rely on "stress functions" that necessitate solving a large system of linear equations ($4N-2$ constants for an $N$-layered system) for every single data point. This creates a significant computational bottleneck, making sophisticated simulations slow and resource-intensive. This paper introduces a high-speed algorithm that replaces these slow numerical solvers with explicit mathematical recurrence relationships.
Modeling the Multilayered System
The problem considers an $N$-layered elastic system subjected to an axisymmetric load. Each layer is characterized by its thickness ($h_i$), Poisson's ratio ($\nu_i$), and shear modulus ($G_i$).
As shown in the figure above, the system is modeled in cylindrical coordinates $(r, z)$. The top layer is subjected to a uniform vertical pressure $p$ over a circular area of radius $\delta$. The goal is to determine the stress and displacement at any point $P(r, z)$ within this structure.
Methodology
The core innovation of this research is the move away from traditional numerical solvers toward an explicit analytical approach using Integral Transform Techniques.
- Integral Transforms: Hankel transforms are applied to handle the radial direction, while Laplace transforms address the depth/vertical direction within the governing partial differential equations of elasticity.
- The Recurrence Relationship: Instead of solving for all layers simultaneously via a giant matrix, the authors derived a systematic recurrence relationship. This formula directly links the state of stress and displacement at any depth $z$ to the conditions at the surface $(z=0)$.
- Explicit Determination: By explicitly defining these relationships, the "constants of integration" that typically require a numerical solver can be calculated directly.
- Inverse Transform: Finally, an inverse Hankel transform converts the results from the transform domain back into physical displacement and stress values.
By propagating boundary conditions through layers using matrix multiplication (recurrence) rather than matrix inversion, the algorithm bypasses the most computationally expensive part of traditional LET programs.
Validation and Results
The algorithm's accuracy was verified using two primary benchmarks:
- Boussinesq Solutions: The algorithm perfectly recovered classical formulas for stress and displacement in a single-layer homogeneous half-space under concentrated and circular loads.
- Jones’ Tables: For three-layer systems, the algorithm’s results matched standard reference tables to at least three significant digits across various stiffness ratios ($E_1/E_2$) and layer thicknesses.
While specific execution times vary by hardware, the explicit nature of the recurrence relationship ensures a "more rapid solution time" compared to industry-standard programs like BISAR or JULEA, which rely on the stress-function approach.
Conclusion and Future Work
The proposed algorithm provides a robust and efficient framework for pavement analysis. By eliminating the need for numerical linear system solvers, it offers a "plug-and-play" solution for developers of next-generation pavement design software.
Currently, the model assumes "fully bonded" conditions between layers. Future modifications could extend this recurrence approach to handle interface slips (friction/sliding) or non-circular and horizontal loading conditions.
Summary updated