Influences of the 2010 Eyjafjallajökull volcanic plume on air quality in the northern Alpine region

Klaus Schäfer, Werner Thomas, Annette Peters, Ludwig Ries, Friedrich Obleitner, Jürgen Schnelle‐Kreis, W. Birmili, J. Diemer, Wolfgang Fricke, W. Junkermann, Mike Pitz, Stefan Emeis, Renate Forkel, P. Suppan, H. Flentje, H-Erich Wichmann, Stefan Gilge, Frank Meinhardt, Roger Zimmermann, Kay Weinhold, Jens Soentgen, Christoph Münkel, C. Freuer, Josef Cyrys2011 · DOI

TL;DR

This paper investigates the impact of the 2010 Eyjafjallajökull volcanic eruption on air quality in the northern Alpine region. It reveals that volcanic ash and sulfur dioxide significantly elevated particulate matter (PM10) levels, exceeding regulatory thresholds and influencing air quality for several days. The study highlights the complex interplay of atmospheric transport, mixing, and chemical transformations in distributing volcanic emissions and their potential health implications.

What Problem Does This Paper Address?

The 2010 eruption of Iceland's Eyjafjallajökull volcano released a massive plume of ash and gases that disrupted air travel across Europe and raised concerns about its impact on air quality and public health. While the immediate effects, like aviation disruption, were widely reported, a detailed understanding of how these volcanic emissions affected air quality at ground level, particularly in sensitive regions like the northern Alps, was needed. This paper aims to fill that gap by quantifying the influence of the volcanic plume on particulate matter (PM10) and sulfur dioxide (SO2) concentrations in this region, assessing whether these levels exceeded regulatory limits, and exploring the underlying atmospheric processes.

Methods

The study employed a multi-faceted approach combining ground-based in situ measurements, remote sensing data, and meteorological analyses. Key methods included:

  • Ground-based monitoring: Continuous measurements of PM10 and SO2 concentrations were taken at various monitoring stations across Southern Germany and the Austrian Alps. Different instruments were used for PM10 (beta-radiation absorption and tapered element oscillating microbalance) and SO2 (UV-fluorescence).
  • Particle size distribution (PSD) analysis: Sophisticated instruments like scanning mobility particle sizers (SMPS) and differential mobility particle sizers (TDMPS) were used to characterize the size distribution of airborne particles, distinguishing between ultrafine (<100 nm), accumulation mode (0.1–1 µm), and coarse particles (>1 µm).
  • Chemical analysis of PM10: Elemental composition of PM10 samples was analyzed using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) to identify volcanic fingerprint elements like Titanium (Ti), Zirconium (Zr), and others.
  • Remote sensing: METEOSAT SEVIRI satellite imagery, specifically the "ash product," was used to track the plume's horizontal and vertical distribution.
  • Meteorological analysis: Data from ECMWF (European Centre for Medium-Range Weather Forecasts) analyses, including geopotential height, horizontal wind, relative humidity, and vertical wind components, were used to understand atmospheric transport and mixing processes.
  • HYSPLIT backward trajectories: These were used to trace the origin and path of air masses reaching the monitoring sites.
  • Wet deposition analysis: Rainwater samples were analyzed for ion concentrations and pH to assess the removal of volcanic material from the atmosphere.

Datasets

The study utilized several datasets:

  • Ground-based air quality monitoring data: PM10 and SO2 concentrations from monitoring networks in Southern Germany (Bavarian Air Monitoring Network - LÜB, and Baden-Württemberg's network - LUBW) and Austria (Innsbruck).
  • Particle size distribution data: Collected by the German Ultrafine Aerosol Network (GUAN).
  • METEOSAT SEVIRI satellite imagery: Specifically, the "ash product" for plume tracking.
  • ECMWF meteorological data: Reanalysis data for atmospheric conditions.
  • HYSPLIT model output: For trajectory analysis.
  • Volcanic ash composition data: From the Institute of Earth Sciences, University of Iceland.
  • Earth crust composition data: From Binder (1999).

Key Insights and Ideas

  • Volcanic plume as a distinct chemical signature: The elevated concentrations of specific elements like Titanium (Ti), Zirconium (Zr), and Yttrium (Y) in PM10 samples provided a clear chemical fingerprint, distinguishing the volcanic plume from other sources like Saharan dust or anthropogenic emissions.
  • Ultrafine particle formation: The study suggests that high concentrations of ultrafine particles (<100 nm) were not directly emitted but formed through photochemical processes involving sulfur dioxide (SO2) in the plume, leading to the production of sulfuric acid (H2SO4).
  • Differential impact on particle sizes: The volcanic plume primarily affected coarse particles (>1 µm, likely volcanic ash) and ultrafine particles (<100 nm), while accumulation mode aerosols (0.1–1 µm) remained largely unchanged.
  • Meteorology as a key modulator: The entrainment and near-surface impact of the volcanic plume were heavily influenced by meteorological conditions, particularly the stability of the planetary boundary layer (PBL) and atmospheric mixing processes.
  • Exceedance of air quality thresholds: The volcanic plume led to exceedances of the daily PM10 threshold value in the northern Alpine region, highlighting its significant impact on ambient air quality.

Key Results

  • Enhanced PM10 and SO2 concentrations were detected starting April 17th, with peak concentrations observed on April 19th and 20th.
  • PM10 levels exceeded the daily threshold value (50 µg m⁻³) at numerous monitoring stations in the North Alpine foothills and in mountain and valley stations.
  • Elevated Titanium concentrations in PM10 samples confirmed the presence of volcanic plume material.
  • Ultrafine particle (UFP) concentrations showed significant increases, particularly on April 17th and 19th, attributed to secondary formation from SO2.
  • The volcanic plume's influence was most pronounced in the Augsburg-München area.
  • The estimated contribution of volcanic plume material to ambient PM10 was around 12±5 µg m⁻³ on April 19th and 17±7 µg m⁻³ on April 20th in Augsburg.
  • While volcanic emissions contributed to air quality issues, they were significantly lower than those from the 1783-1784 Laki eruption.

Limitations and Future Work

  • Health effects: While the study discusses potential health impacts based on existing knowledge, it notes that toxicological investigations are ongoing and that the observed concentrations were generally lower than those associated with severe respiratory exacerbations in previous volcanic events. The paper concludes that the effect on human health in Germany, if any, is expected to be minor.
  • Source apportionment: The paper mentions that a source apportionment study based on PSD analyses will be published separately to further distinguish volcanic ash from other sources.
  • Model validation: The study relies on ECMWF reanalysis data for meteorological context. Future work could involve more detailed modeling to simulate the plume's dispersion and chemical evolution.
  • Long-term monitoring: The study focuses on the initial event. Further research could investigate potential long-term impacts or the influence of subsequent, less intense volcanic activity.

Summary updated

Abstract

A series of major eruptions of the Eyjafjallajökull volcano in Iceland started on 14 April 2010 and continued until the end of May 2010. The volcanic emissions moved over nearly the whole of Europe and were observed first on 16 April 2010 in Southern Germany with different remote sensing systems from the ground and space. Enhanced PM10 and SO2 concentrations were detected on 17 April at mountain stations (Zugspitze/Schneefernerhaus and Schauinsland) as well as in Innsbruck by in situ measurement devices. On 19 April intensive vertical mixing and advection along with clear sky-conditions facilitated the entrainment of volcanic material down to the ground. The subsequent formation of a stably stratified lower atmosphere with limited mixing near the ground during the evening of 19 April led to an additional enhancement of near-surface particle concentrations. Consequently, on 19 April and 20 April exceedances of the daily threshold value for particulate matter (PM10) were reported at nearly all monitoring stations of the North Alpine foothills as well as at mountain and valley stations in the northern Alps. The chemical analyses of ambient PM10 at monitoring stations of the North Alpine foothills yielded elevated Titanium concentrations on 19/20 April which prove the presence of volcanic plume material. Following this result the PM10 threshold exceedances are also associated with the volcanic plume. The entrainment of the volcanic plume material mainly affected the concentrations of coarse particles (&gt;1 μm) – interpreted as volcanic ash – and ultrafine particles (&lt;100 nm), while the concentrations of accumulation mode aerosol (0.1–1 μm) were not changed significantly. With regard to the occurrence of ultrafine particles, it is concluded that their formation was triggered by high sulphuric acid concentrations which are necessarily generated by the photochemical processes in a plume rich in sulphur dioxide under high solar irradiance. It became evident that during the course of several days, the Eyjafjallajökull volcanic emissions influenced the near-surface atmosphere and thus the ambient air quality. Following knowledge about health effects of air pollutants and volcanic plume compounds, it is assumed that the volcanic plume contributed to the overall exposure of the population and therefore may have had minor effects on the exacerbation of respiratory and cardiovascular symptoms.
BibTeX
@misc{schafer2011influences,
  author = {Klaus Schäfer and Werner Thomas and Annette Peters and Ludwig Ries and Friedrich Obleitner and Jürgen Schnelle‐Kreis and W. Birmili and J. Diemer and Wolfgang Fricke and W. Junkermann and Mike Pitz and Stefan Emeis and Renate Forkel and P. Suppan and H. Flentje and H-Erich Wichmann and Stefan Gilge and Frank Meinhardt and Roger Zimmermann and Kay Weinhold and Jens Soentgen and Christoph Münkel and C. Freuer and Josef Cyrys},
  title = {{Influences of the 2010 Eyjafjallajökull volcanic plume on air quality in the northern Alpine region}},
  year = {2011},
  doi = {10.5194/acpd-11-9083-2011},
}
Figure