Influences of superfine-grinding and mix enzymatic hydrolysis combined with hydroxypropylation or acetylation on the structure and physicochemical properties of jujube kernel fiber

Jiangning Zhang, Ye ZhengFrontiers in Sustainable Food Systems 2024 · DOI

TL;DR

Researchers have developed a multi-stage "composite modification" strategy to transform jujube kernel waste into a high-value functional food ingredient. By combining superfine-grinding and enzymatic hydrolysis with chemical "tuning" (hydroxypropylation or acetylation), they significantly boosted the fiber's solubility, antioxidant content, and ability to trap oil and glucose.

What Problem Does This Paper Address?

Jujube kernels are a massive byproduct of the food industry, particularly in China, where roughly 200,000 tons are produced annually. While rich in dietary fiber, most of this material is discarded because it consists primarily of insoluble fiber with poor physicochemical properties—meaning it doesn't dissolve well, lacks viscosity, and has minimal health-promoting functionality in food formulations.

The challenge lies in increasing the Soluble Dietary Fiber (SDF) content. High-SDF ingredients are prized for their ability to manage blood sugar (hypoglycemic effects) and cholesterol (hypolipidemic effects). This paper explores whether a synergistic approach—combining physical, biological, and chemical modifications—can turn this "low-cost waste" into a "high-tech" functional ingredient.

Methods

The authors employed a three-tiered modification strategy on Jujube Kernel Fiber (JKF):

  1. Physical Modification: Superfine-grinding to break down cell walls and increase surface area.
  2. Biological Modification (Enzymolysis): A mix of cellulase (to break down cellulose chains) and laccase (to degrade lignin and release bound polyphenols).
  3. Chemical Modification: Two separate paths were tested to "tune" the fiber's affinity:
  4. Hydroxypropylation: Adding hydroxypropyl groups to increase polarity and water affinity.
  5. Acetylation: Adding acetyl groups to increase hydrophobicity (oil affinity).

The resulting samples (JKF-SGE, JKF-SGEH, and JKF-SGEA) were compared against raw JKF and a "gold standard" commercial fiber, oat $\beta$-D-glucan.

Datasets

As an experimental food science study, this paper does not use computational datasets. Instead, it relies on primary experimental data generated through:

  • Structural Analysis: SEM (Scanning Electron Microscopy) for microstructure and FT-IR (Fourier-transform infrared spectroscopy) for chemical bond verification.
  • Physicochemical Testing: Measuring particle size (laser diffraction), surface area, viscosity, and cation exchange capacity.
  • Functional Assays: In vitro tests for water/oil absorption and glucose adsorption capacity.

Key Insights and Ideas

  • The Porosity Breakthrough: Raw JKF has a relatively smooth surface. The composite modifications created a "honeycomb" microstructure. This increased porosity is the engine behind the improved adsorption—more holes mean more places to trap oil, water, or sugar molecules.
  • Laccase’s Dual Role: Beyond just breaking down fiber, laccase treatment significantly increased extractable polyphenols. This suggests the modification doesn't just improve texture; it boosts the antioxidant profile of the ingredient.
  • Functional Tuning: The study demonstrates that you can "steer" the fiber's utility. If you want a fiber for meat products or fried foods, acetylation (JKF-SGEA) is superior because it maximizes oil adsorption. If you want a fiber for sugar management in beverages, hydroxypropylation (JKF-SGEH) is better due to its high glucose adsorption and viscosity.
  • Synergy over Silos: While superfine-grinding or enzymes alone help, the chemical step was necessary to reach functional parity with high-end commercial fibers like oat $\beta$-D-glucan.

Key Results

  • Soluble Fiber Boost: The SDF content jumped from 6.32 g/100g in raw JKF to 17.43 g/100g in the hydroxypropylated version—a nearly 3x increase.
  • Surface Area Expansion: Modification increased the specific surface area from 51.46 $m^2/kg$ to a peak of 142.53 $m^2/kg$.
  • Glucose Adsorption: JKF-SGEH exhibited a glucose adsorption capacity of 29.61 $\mu mol/g$, which actually outperformed the oat $\beta$-D-glucan control (23.51 $\mu mol/g$).
  • Oil Adsorption: The acetylated version (JKF-SGEA) reached an oil adsorption ability of 4.47 g/g, making it a potent candidate for fat-reduction applications in food.

Limitations and Future Work

  • Color Changes: The modifications (especially alkaline treatments and heating) caused the fiber to turn brown (lower $L^*$ value, higher $a^*$ and $b^*$ values). This might limit its use in light-colored food products like white bread or yogurt.
  • In Vivo Validation: The hypoglycemic and hypolipidemic effects were measured in vitro (in a lab setting). The authors acknowledge that animal or human clinical trials are needed to confirm these health benefits in a living digestive system.
  • Scalability: While effective, the multi-step process involving specific enzymes and chemical reagents (like propylene oxide) needs a cost-benefit analysis before it can be scaled for industrial food production.

Summary updated

Abstract

Introduction Jujube kernel is a low-cost and abundant fiber resource, but its application in food industry is little because of its lower soluble fiber content and poor physicochemical properties. Methods In the current study, jujube kernel fiber (JKF) was modified by three composite methods: superfine-grinding and mix enzymatic hydrolysis alone, and combined with acetylation or hydroxypropylation. Results and discussion After these modifications, the microstructure of JKF became more porous, and its soluble fiber and extractable polyphenol contents, surface area, water adsorption and expansion capacities, and cation exchange capacity were all significantly improved ( p < 0.05). Moreover, superfine-grinding and mix enzymatic hydrolysis combined with acetylation treated JKF showed the highest surface hydrophobicity (43.57) and adsorption ability to oil (4.47 g∙g −1 ). Superfine-grinding, mix enzymatic hydrolysis and hydroxypropylation treated JKF exhibited the largest surface area (142.53 m 2 ∙kg −1 ), the highest soluble fiber content (17.43 g∙100 g −1 ), viscosity (14.54 cP), adsorption capacity to glucose (29.61 μmol∙g −1 ), cation exchange capacity (40.82), and water expansion ability (7.60 mL∙g −1 ). Therefore, superfine-grinding and mix enzymatic hydrolysis combined with hydroxypropylation or acetylation were both good choice to improve the physicochemical properties of JKF.
BibTeX
@inproceedings{zhang2024influences,
  author = {Jiangning Zhang and Ye Zheng},
  title = {{Influences of superfine-grinding and mix enzymatic hydrolysis combined with hydroxypropylation or acetylation on the structure and physicochemical properties of jujube kernel fiber}},
  booktitle = {Frontiers in Sustainable Food Systems},
  year = {2024},
  doi = {10.3389/fsufs.2024.1382314},
}
Figure