Influence of position of first layer of nodes to numerical simulation result of airflow at working face with auxiliary ventilation
Lists
Only you see this
Abstract
The present article is to introduce our study on the positional influence of the first node-layer on the numerical simulation results of the air flow of the working face in a mine with the auxiliary ventilation. As is known, the first layer of the nodes near the wall should be located in the layer of logarithm zone in order to get high accuracy . Therefore, the mesh generation, especially the distance of the first layer of mesh nodes to the wall surface, can be greatly influenced by the numerical simulation results of airflow when CFD is adopted . In addition, the mesh is grided so that the distance from the first layer of nodes to the wall surface is equal. Therefore, since at the working face with auxiliary ventilation, the airflow distribution is often made uneven, it is impossible to put all of the first layer nodes near the wall surface to the layer of logarithm law zone. The airflow field at the working face with auxiliary ventilation can only be simulated by using of a commercial software package in a different meshing grid at various distances from the wall to the first layer of nodes. The maximum velocity, the average positive air velocity and average negative air velocity distribution along the roadway at working face can only be analyzed by comparing the experimental data gained by Tomita. It comes from this need that we have put forward the method for determining the distance from the wall surface to the first layer nodes. In addition, . the more the numbers of the first layer nodes in the logarithm law zone, the more accurate the simulation results will be.
BibTeX
@inproceedings{gao2010influence,
author = {Jianliang Gao and Yanli Zhang},
title = {{Influence of position of first layer of nodes to numerical simulation result of airflow at working face with auxiliary ventilation}},
booktitle = {Applied Mechanics and Materials},
year = {2010},
}Loading related content...