In-Situ Calibration of Antenna Arrays for Positioning With 5G Networks

Mengguan Pan, Shengheng Liu, Peng Liu, Wangdong Qi, Yongming Huang, Zheng Wang, Qihui Wu, Markus GardillarXiv 2023 · DOI · arXiv

Abstract

Owing to the ubiquity of cellular communication signals, positioning with the fifth generation (5G) signal has emerged as a promising solution in global navigation satellite system-denied areas. Unfortunately, although the widely employed antenna arrays in 5G remote radio units (RRUs) facilitate the measurement of the direction of arrival (DOA), DOA-based positioning performance is severely degraded by array errors. This paper proposes an in-situ calibration framework with a user terminal transmitting 5G reference signals at several known positions in the actual operating environment and the accessible RRUs estimating their array errors from these reference signals. Further, since sub-6GHz small-cell RRUs deployed for indoor coverage generally have small-aperture antenna arrays, while 5G signals have plentiful bandwidth resources, this work segregates the multipath components via super-resolution delay estimation based on the maximum likelihood criteria. This differs significantly from existing in-situ calibration works which resolve multipaths in the spatial domain. The superiority of the proposed method is first verified by numerical simulations. We then demonstrate via field test with commercial 5G equipment that, a reduction of 46.7% for 1-σ DOA estimation error can be achieved by in-situ calibration using the proposed method.

Introduction

Precise indoor positioning is a critical requirement for many emerging 5G applications where GPS is unavailable. While 5G networks utilize Direction of Arrival (DOA) measurements from antenna arrays to estimate location, real-world performance often falls short of theoretical ideals. Manufacturing imperfections, mutual coupling, and local environmental scattering (e.g., reflections from walls or pillars) introduce significant errors into the "array manifold"—the mathematical model of how the array responds to signals from different directions.

Traditional calibration methods performed in controlled anechoic chambers fail to account for the specific multipath environment of an installed Remote Radio Unit (RRU). This paper introduces a novel "in-situ" calibration framework that leverages standard 5G signals to correct these errors on-site, significantly improving positioning accuracy without specialized hardware.

Proposed Methodology

The core of the proposed framework is an in-situ calibration procedure that utilizes a standard 5G User Terminal (UT) at known positions to transmit Uplink Sounding Reference Signals (UL-SRS).

Overview of the in-situ calibration and positioning framework.

The methodology relies on three key innovations:

  1. Delay-Domain Separation: Unlike traditional methods that attempt to separate signals spatially, this approach exploits 5G’s wide bandwidth to resolve multipath components in the time (delay) domain. This is particularly effective for small-aperture arrays where spatial resolution is limited.
  2. EM-based Super-Resolution: A Maximum Likelihood Estimation (MLE) problem is formulated to jointly estimate array responses and signal delays. This is solved using an Expectation-Maximization (EM) algorithm that iteratively isolates the direct path from reflections.
  3. Non-Parametric Modeling: The system builds a high-fidelity map of array errors across different angles using discrete measurements and regression, rather than relying on simplified parametric models.

Experimental Validation and Results

The framework was validated through both simulation and real-world testing. Simulations using the QuaDRiGa channel simulator demonstrated that the proposed EM-based approach is significantly more robust than traditional methods like the Principal Eigenvector (PE) approach, especially in dense multipath environments where reflections are strong.

Manifold mismatch metric comparison across different Ricean K-factors showing the superiority of the EM-based approach.

In real-world field tests conducted in a 1125 m² underground parking lot with commercial 5G equipment, the in-situ calibration achieved a 46.7% reduction in 1-σ DOA estimation error, dropping from 3.0° to 1.6°. The algorithm's efficiency is also notable, typically converging in fewer than 10 iterations, making it suitable for practical deployment.

Conclusion and Future Work

This work demonstrates that "the environment is part of the antenna" and that calibration must occur in-situ to be effective. By leveraging bandwidth as a proxy for spatial aperture, the proposed method overcomes the physical limitations of small 5G arrays. Future research will focus on extending this framework from 2D azimuth-only positioning to 3D positioning using planar arrays and investigating its application in near-field conditions for massive MIMO and millimeter-wave systems.

Summary updated

Abstract

Owing to the ubiquity of cellular communication signals, positioning with the fifth generation (5G) signal has emerged as a promising solution in global navigation satellite system-denied areas. Unfortunately, although the widely employed antenna arrays in 5G remote radio units (RRUs) facilitate the measurement of the direction of arrival (DOA), DOA-based positioning performance is severely degraded by array errors. This paper proposes an in-situ calibration framework with a user terminal transmitting 5G reference signals at several known positions in the actual operating environment and the accessible RRUs estimating their array errors from these reference signals. Further, since sub-6GHz small-cell RRUs deployed for indoor coverage generally have small-aperture antenna arrays, while 5G signals have plentiful bandwidth resources, this work segregates the multipath components via super-resolution delay estimation based on the maximum likelihood criteria. This differs significantly from existing in-situ calibration works which resolve multipaths in the spatial domain. The superiority of the proposed method is first verified by numerical simulations. We then demonstrate via field test with commercial 5G equipment that, a reduction of 46.7% for 1-$σ$ DOA estimation error can be achieved by in-situ calibration using the proposed method.
BibTeX
@misc{pan2023situ,
  author = {Mengguan Pan and Shengheng Liu and Peng Liu and Wangdong Qi and Yongming Huang and Zheng Wang and Qihui Wu and Markus Gardill},
  title = {{In-Situ Calibration of Antenna Arrays for Positioning With 5G Networks}},
  year = {2023},
  eprint = {2303.04470},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2303.04470},
}
Figure