Improving Indistinguishability\nof Single Photons from\nColloidal Quantum Dots Using Nanocavities

Abhi Saxena, Yueyang Chen, Albert Ryou, Carlos G. Sevilla, Peipeng Xu, Arka MajumdararXiv 2019 · DOI · arXiv

Abstract Colloidal quantum dots have garnered active research interest as quantum emitters due to their robust synthesis process and straightforward integration with nanophotonic platforms. However, obtaining indistinguishable photons from the colloidal quantum dots at room temperature is fundamentally challenging because they suffer from an extremely large dephasing rate. Here we propose an experimentally feasible method of obtaining indistinguishable single photons from an incoherently pumped solution-processed colloidal quantum dot coupled to a system of nanocavities. We show that by coupling a colloidal quantum dot to a pair of silicon nitride cavities, we can obtain comparable performance of a single photon source from colloidal quantum dots as other leading quantum emitters like defect centers and self-assembled quantum dots.

Introduction

Quantum information processing and secure communication networks rely on the generation of "indistinguishable" single photons—photons that are identical in frequency, polarization, and spatial mode. Colloidal quantum dots (cQDs) are promising candidates for these sources due to their cost-effective synthesis and ease of integration via solution processing. However, at room temperature, cQDs exhibit severe dephasing. Environmental interactions cause rapid energy level fluctuations, resulting in an emission spectrum roughly 100,000 times broader than the natural decay rate. This leads to an indistinguishability near zero ($10^{-5}$), rendering them unsuitable for most quantum applications without significant intervention.

Proposed Cascaded Cavity Architecture

To mitigate this dephasing, the researchers propose a cascaded cavity system designed to "filter" the broad emission into a high-quality quantum signal. The architecture consists of two coupled resonators:

  1. Cavity 1 ($C_1$): A silicon nitride (SiN) nanobeam cavity with a small mode volume, coupled directly to the cQD to enhance light-matter interaction.
  2. Cavity 2 ($C_2$): A high-quality factor ($Q$) SiN ring resonator that acts as a spectral funnel, narrowing the emission linewidth.

The system is modeled under realistic incoherent pumping conditions, simulating a 3-picosecond laser pulse. This approach, utilizing the Master Equation and Optical Bloch Equations via the QuTiP framework, provides a more accurate representation of experimental scenarios than previous "initially excited" state models.

Results and Performance Trade-offs

The primary mechanism for improvement is the "funneling" effect, where $C_2$ forces the noisy emission into a narrow spectral window. However, this introduces a critical trade-off: while a higher $Q$ factor in $C_2$ improves the indistinguishability ($\beta$), it simultaneously reduces the total photon collection efficiency.

Using realistic parameters for current SiN fabrication ($Q_1 \approx 6 \times 10^4$ and $Q_2 \approx 2 \times 10^6$), the model predicts an indistinguishability of 0.629 with an efficiency of 0.152%. Under optimized conditions with smaller mode volumes, the system can achieve an indistinguishability of 0.9. This performance allows cQDs to rival leading emitters like Silicon Vacancy (SiV) centers, despite the cQD's significantly higher intrinsic dephasing rate.

Conclusion and Future Outlook

While the proposed architecture demonstrates a path toward scalable, room-temperature single-photon sources, challenges remain. The current collection efficiency is low (below 1%), and the refractive index of Silicon Nitride limits further miniaturization. Future work may explore higher-index materials like Gallium Phosphide (GaP) to reduce mode volumes further. Additionally, the deterministic placement of single cQDs within the nanobeam cavity's "sweet spot" remains a primary fabrication hurdle. Nevertheless, this dual-cavity approach provides a viable framework for utilizing solution-processed emitters in high-performance quantum photonic circuits.

Summary updated

Abstract

Colloidal quantum dots have garnered active research\ninterest as\nquantum emitters due to their robust synthesis process and straightforward\nintegration with nanophotonic platforms. However, obtaining indistinguishable\nphotons from the colloidal quantum dots at room temperature is fundamentally\nchallenging because they suffer from an extremely large dephasing\nrate. Here we propose an experimentally feasible method of obtaining\nindistinguishable single photons from an incoherently pumped solution-processed\ncolloidal quantum dot coupled to a system of nanocavities. We show\nthat by coupling a colloidal quantum dot to a pair of silicon nitride\ncavities, we can obtain comparable performance of a single photon\nsource from colloidal quantum dots as other leading quantum emitters\nlike defect centers and self-assembled quantum dots.
BibTeX
@misc{saxena2019improving,
  author = {Abhi Saxena and Yueyang Chen and Albert Ryou and Carlos G. Sevilla and Peipeng Xu and Arka Majumdar},
  title = {{Improving Indistinguishability\textbackslash\{\}nof Single Photons from\textbackslash\{\}nColloidal Quantum Dots Using Nanocavities}},
  year = {2019},
  eprint = {1908.07588},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/1908.07588},
}

Loading related content...

Figure