Abstract
As social productivity increases, environmental challenges such as construction dust have become significant contributors to air pollution and public health risks. This paper details the development of an optimized road construction hoarding system designed for both efficiency and environmental protection. By utilizing particle trajectory simulations, we determined that a 3.5-meter enclosure height provides the optimal balance between material use and dust suppression, reducing spillover by nearly 44%. Furthermore, a modular mechanical design featuring snap-fit sealing and auxiliary supports was developed to improve wind resistance and facilitate rapid assembly and disassembly.
Introduction
Road construction is vital for economic development but often results in significant localized air pollution. Construction dust contributes to respiratory illnesses and environmental degradation, with some studies suggesting a nearly 60% increase in emphysema risk for residents near high-dust sites. Traditional "dust fencing" often suffers from structural failure under wind loads and high labor costs due to difficult installation. This research addresses these issues by optimizing hoarding height and redesigning structural components for better sealing and stability.
Methodology and Height Optimization
The study employed particle tracking simulations to evaluate the effectiveness of various hoarding heights. The "spill rate" ($R$) was calculated as the ratio of escaped particles to total particles tracked. Simulations were conducted for heights ranging from 0m to 4.5m, tracking approximately 3,500 to 4,100 particles per scenario.
As shown in Figure 1, the relationship between height and dust containment follows a law of diminishing returns. While significant gains are made up to 3.5m, increasing the height further to 4.5m yields only a marginal 1.36% improvement in containment, suggesting that 3.5m is the most cost-effective height for standard operations.
Mechanical Design Innovation
To address operational inefficiencies and structural weaknesses, a new modular system was designed using 3D modeling. Key features include:
- Snap-Fit Sealing: Panels utilize sealing snap slots and posts to create a continuous, airtight barrier, preventing dust from leaking through localized pressure gaps.
- Structural Stability: The design incorporates primary and secondary auxiliary support feet with ground spikes to resist wind-induced buckling and tipping.
- Maintenance Protection: Capping plates protect internal locking mechanisms from rainwater and debris, ensuring the system remains easy to dismantle after prolonged use on-site.
Key Results
The simulation results identified 3.5 meters as the "sweet spot" for construction hoardings. At this height, the spillover rate was reduced to 52.44%, representing a 43.91% improvement over the baseline (no fence). The modular design not only enhances dust suppression through better sealing but also reduces the labor required for setup and teardown, offering a more sustainable and practical solution for urban construction projects.
Conclusion
The proposed hoarding design offers a scientifically grounded approach to construction dust management. By combining height optimization with modular mechanical engineering, the system provides superior environmental protection while remaining practical for real-world construction environments. Future work will focus on field-testing these designs under varying weather conditions and exploring lightweight composite materials to further reduce transport costs.
Summary updated