Improved Optical Signal Processing with On-Chip Programmable Filter

Tiantian Li, Yumeng Liu, Luwen Xing, Stewart R. Lang, Zhangfeng Ge, Dongdong Han, Zhanqiang Hui, Huimin Du, Haowen ShuPhotonics 2025 · DOI

TL;DR

This paper presents an on-chip optical pre-equalizer that significantly extends the bandwidth of bandwidth-limited optical transmitters. By flattening the frequency response, the system's 3 dB electro-optical bandwidth is boosted from 18 GHz to 40 GHz, leading to improved signal quality (extinction ratio and Q-factor) for OOK signals at data rates up to 50 Gbps.

What Problem Does This Paper Address?

The ever-increasing demand for data in modern communication systems (driven by AI, 5G, etc.) is hitting a bottleneck: bandwidth-limited transmitters. These limitations arise from the natural roll-off in the frequency response of optical components, where high-frequency components of the signal are weaker than low-frequency ones. This uneven spectral distribution restricts the overall data capacity. While various electrical and optical compensation techniques exist, they often come with drawbacks like complexity, power consumption, or limited performance. This paper tackles the challenge of improving transmitter bandwidth in a compact, efficient, and on-chip manner.

Methods

The core of this work is an on-chip optical pre-emphasis filter implemented using a dual-ring-assisted Mach-Zehnder Interferometer (DR-MZI). This DR-MZI structure functions as a fourth-order Infinite Impulse Response (IIR) filter. The key idea is to use this filter to "pre-emphasize" the signal, effectively boosting the high-frequency components to counteract the natural roll-off of the transmitter.

The filter is fabricated on a silicon-on-insulator (SOI) platform. The DR-MZI's tunable nature, achieved by adjusting micro-ring resonators with TiN thermal resistors, allows for precise control over its frequency response. This tunability is crucial for matching the pre-emphasis to the specific characteristics of the bandwidth-limited modulator. The authors experimentally characterized the filter's spectral performance and then integrated it with a commercial LiNbO3 modulator to measure its impact on the overall transmission system.

Datasets

Not discussed in the paper. The experiments involved generating OOK signals at various data rates (20-50 Gbps) using a binary pattern generator and evaluating the system's performance using a vector network analyzer and an oscilloscope.

Key Insights and Ideas

  • On-chip pre-emphasis as a solution: The paper demonstrates that integrating an optical pre-equalizer directly onto the transmitter chip is a viable and effective strategy to overcome bandwidth limitations.
  • DR-MZI's versatility: The DR-MZI structure proves to be a flexible building block for creating tunable optical filters with desirable spectral shaping capabilities.
  • Bandwidth extension is significant: The ability to extend the 3 dB electro-optical bandwidth from 18 GHz to 40 GHz is a substantial improvement, directly addressing the core problem.
  • Eye diagram improvements are tangible: The visual evidence from the eye diagrams clearly shows reduced distortion and improved signal clarity after applying the pre-emphasis filter.
  • Trade-offs are acknowledged: The authors note that while pre-emphasis improves performance, it does introduce some optical loss, which can be mitigated by monolithic integration.

Key Results

  • Bandwidth Extension: The 3 dB electro-optical bandwidth of the transmission system was extended from 18 GHz to 40 GHz.
  • Extinction Ratio Improvement: The extinction ratio of OOK signals improved by 0.64–3.2 dB across data rates of 20 to 50 Gbps.
  • Q-Factor Improvement: The Q-factor of the eye diagram increased by 0.78–4.36 for OOK signals at data rates ranging from 20 to 50 Gbps.
  • Specific improvements at 20 Gbps: A significant improvement of 3.2 dB in extinction ratio and a 4.36 increase in Q-factor were observed.

Limitations and Future Work

  • Optical Loss: The pre-emphasis process introduces optical loss, which is noted as a trade-off. The authors suggest that monolithic integration of the equalizer with the transmitter would help mitigate these losses by avoiding coupling losses.
  • Filter Order and Complexity: While higher filter orders could potentially offer even greater pre-emphasis, this would come at the cost of increased filter complexity and potentially higher insertion loss.
  • Future Directions: The paper suggests that on-chip optical pre-equalization is a promising solution for bandwidth-limited transmitters and could reduce the complexity and power consumption of digital signal processing (DSP) and high-end DACs. It also lays the groundwork for joint optimization strategies between optical and electrical components.

Summary updated

Abstract

Bandwidth-limited transmitters have become a severe issue with the rapid growth of bandwidth-hungry services. We investigate the impact of an on-chip optical pre-emphasizer on a bandwidth-limited transmitter and quantitatively analyze the results of bandwidth extension. Improvements in eye diagram performance are discussed. The 3 dB electro-optical bandwidth of the transmission system is effectively extended from 18 GHz to 40 GHz. The extinction ratio of the on–off keying (OOK) signal at data rates of 20 to 50 Gbps is improved by 0.64–3.2 dB. Additionally, the Q factor of the eye diagram increases by 0.78–4.36 at data rates ranging from 20 to 50 Gbps.
BibTeX
@inproceedings{li2025improved,
  author = {Tiantian Li and Yumeng Liu and Luwen Xing and Stewart R. Lang and Zhangfeng Ge and Dongdong Han and Zhanqiang Hui and Huimin Du and Haowen Shu},
  title = {{Improved Optical Signal Processing with On-Chip Programmable Filter}},
  booktitle = {Photonics},
  year = {2025},
  doi = {10.3390/photonics12050416},
}
Figure