Impact of Sintered Temperature on the Heat and Cation Transport in NaK-BASE Tube

Ning Guan, Weijian Chen, Yan GaoFrontiers in Energy Research 2021 · DOI

Abstract

Alkali metal thermoelectric converters (AMTECs) represent a promising technology for clean energy generation, particularly when coupled with biomass sources. This study investigates the transport of heat and cations within NaK-BASE (Beta-Alumina Solid Electrolyte) tubes fabricated at various sintering temperatures. By employing fractal modeling and the Poisson-Nernst-Planck (PNP) multi-ion transport model, the research explores how microstructure influences temperature distribution, cation concentration, and surface charge density. Findings indicate that higher sintering temperatures optimize microstructure, leading to improved thermal and ionic transport, thereby enhancing the overall performance of NaK-AMTEC systems.

Introduction: Optimizing the "Heart" of AMTECs

Alkali Metal Thermoelectric Converters (AMTECs) are direct energy conversion devices that transform heat into electricity without moving parts, making them ideal for remote or decentralized power generation. The efficiency of these systems hinges on the Beta-Alumina Solid Electrolyte (BASE) tube, which facilitates the transport of sodium (Na⁺) and potassium (K⁺) ions.

A critical factor in the performance of these tubes is their microstructure, which is primarily determined during the sintering process. While it is known that sintering temperature affects material properties, the complex relationship between temperature, the resulting fractal-like geometry, and the subsequent transport of heat and ions has remained under-explored. This research aims to quantify these relationships to provide a clearer roadmap for optimizing AMTEC fabrication.

Methodology

The study utilized a multi-faceted approach combining experimental synthesis with advanced numerical simulations:

  1. Material Synthesis: $\beta''$-Al₂O₃ samples were prepared using a microwave-sintering-assisted sol-gel technique at three distinct temperatures: 1,550°C, 1,600°C, and 1,650°C.
  2. Microstructural Characterization: Scanning Electron Microscopy (SEM) was employed to visualize the porous, fractal-like structures of the sintered samples. These images served as the basis for subsequent modeling.
  3. Fractal and Voronoi Modeling: To account for the material's porosity, a fractal model was used to determine effective thermal conductivity. Voronoi diagrams were generated to create digital grids mimicking the SEM observations for transport simulations.
  4. Transport Simulation: Heat transport was modeled using 2D numerical transient thermal conductivity equations in ANSYS FLUENT. Cation transport was simulated using the Poisson-Nernst-Planck (PNP) model to determine ion concentrations and surface charge densities.
SEM photos of the solid $\beta''$-Al₂O₃ sintered at different temperatures: (A) 1550°C, (B) 1600°C, (C) 1650°C.

Key Results and Insights

The investigation revealed several critical links between manufacturing parameters and device performance:

  • Microstructure and Thermal Conductivity: Increasing the sintering temperature from 1,550°C to 1,650°C significantly enhanced thermal conductivity ($k$) from 20.3 W/m·K to 29.7 W/m·K. The higher temperature leads to a more favorable fractal dimension, allowing for better heat flow through the solid matrix.
  • Temperature Distribution: For a given heat source, tubes sintered at higher temperatures maintained a higher average internal temperature. This is crucial because thermal energy drives the ionic transport necessary for power generation.
  • Cation Transport Dynamics: The study found that cation concentration peaks at specific tortuosity levels (between 180–290 $mol/m^3$). Higher operating temperatures, facilitated by better sintering, directly increased both the peak cation concentration and the surface charge density.
  • Performance Synergy: The results suggest that sintering at 1,600°C or 1,650°C produces a microstructure that minimizes internal resistance and maximizes the transport of Na⁺ and K⁺ ions, significantly boosting AMTEC efficiency.

Limitations and Future Work

While the study provides valuable insights, several areas for refinement remain:

  • Multi-Ion Modeling: The current PNP simulations utilized a simplified single-cation model. Future research should incorporate double or triple cation models to more accurately reflect the NaK-BASE environment.
  • Thermal Radiation: The current model neglects internal radiation, which may be significant at the high operating temperatures (800K–1100K) typical of these converters.
  • 3D Simulation: Moving from 2D to 3D modeling would offer a more comprehensive understanding of the complex geometric interactions between the electrolyte and electrodes.

In conclusion, optimizing the sintering temperature is a vital lever for enhancing the performance of NaK-BASE tubes, paving the way for more efficient and reliable biomass-coupled power generation systems.

Summary updated

Abstract

Alkali metal thermoelectric converter (AMTEC) is a clean energy converter that can be coupled with biomass for power generation. In present research, the transport of heat and cation was investigated in NaK-BASE tubes prepared at different sintered temperatures. The heat conduction and the fractal model were employed to investigate the temperature distributions based on the microstructures of the NaK-BASE tubes sintered at different temperatures, and the transport of Na + and K + in NaK-BASE tube was simulated by Poisson-Nernst-Planck multi-ions transport model, and the cation concentrations and surface charge densities were obtained in the NaK-BASE tubes with different temperatures. The results showed that microstructure of the NaK-BASE was related to the sintered temperature, and the microstructure of the NaK-BASE impacted the temperature distribution, the cation concentration and the surface charge density of Na + and K + in the NaK-BASE tubes. At the same heat source temperature, the average temperature in the NaK-BASE prepared at high sintered temperature was higher than that prepared at low sintered temperature. In addition, the increase of the average temperature resulted in the increase of the cation concentration and the surface charge density of Na + and K + in the NaK-BASE, therefore, the performance of the NaK-AMTEC could be enhanced by increasing the sintered temperature and the average temperature of the NaK-BASE.
BibTeX
@inproceedings{guan2021impact,
  author = {Ning Guan and Weijian Chen and Yan Gao},
  title = {{Impact of Sintered Temperature on the Heat and Cation Transport in NaK-BASE Tube}},
  booktitle = {Frontiers in Energy Research},
  year = {2021},
  doi = {10.3389/fenrg.2021.741951},
}
Figure