Impact of Side-Chain Polarity and Symmetry on the Structure and Properties of Acyclic Dioxythiophene Polymers

Joshua M. Rinehart, Zhuang Xu, Ziming Wang, Anna M. Österholm, Lucas Q. Flagg, Lee J. Richter, Chad R. Snyder, Ying Diao, John R. ReynoldsChemistry 2025 · DOI

TL;DR

This study investigates how the polarity and symmetry of side chains on acyclic dioxythiophene polymers (PAcDOTs) influence their self-assembly, solid-state structure, and electrochemical properties. The researchers found that specific combinations of regio-symmetry and amphiphilicity can lead to chiral liquid crystalline phases, while thermal annealing significantly enhances solid-state order, impacting charge transport and doping behavior.

What Problem Does This Paper Address?

Conjugated polymers are crucial for organic electronics, but their performance is highly sensitive to how polymer chains pack and interact. Achieving consistent, high-performance materials often relies on precise control over polymer synthesis, particularly regioregularity, which can be challenging and costly for large-scale production. This paper addresses the need for a more predictable and tunable approach to controlling polymer structure and properties by systematically investigating how side-chain design—specifically polarity and symmetry—impacts the self-assembly and resulting electronic behavior of a class of thiophene-based polymers (PAcDOTs). The goal is to understand how these side-chain features can be leveraged to achieve desired material properties without strict synthetic control over regioregularity.

Methods

The researchers synthesized a series of acyclic dioxythiophene polymers (PAcDOTs) with varying side-chain characteristics:

  • Monomer Synthesis: Acid-catalyzed transetherification was used, with modifications to achieve asymmetric side-chain substitution.
  • Polymerization: Direct (hetero)arylation polymerization (DArP) was employed.
  • Characterization Techniques:
    • Gel Permeation Chromatography (GPC): To determine molecular weight and dispersity.
  • Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC): To assess thermal stability and phase transitions (melting, crystallization).
  • Cross-Polarized Optical Microscopy (CPOM): To visualize morphology and birefringence, indicating ordered phases.
  • Circular Dichroism (CD) Spectroscopy: To detect chirality, particularly in liquid crystalline phases.
  • Grazing Incidence Wide-Angle X-ray Scattering (GIWAXS): To probe the in-plane and out-of-plane structural ordering of thin films at various temperatures (including in situ studies during heating and cooling).
  • UV-Vis-NIR Spectroscopy: To analyze optical properties and changes upon doping.
  • Differential Pulse Voltammetry (DPV): To determine oxidation potentials.
  • Electrochromic Switching Measurements: To assess doping and dedoping kinetics.

A key methodological aspect was the use of blade coating under Landau-Levich (LL) conditions to control film formation and then thermal annealing to induce more ordered structures.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of novel polymers and their intrinsic properties, rather than training or evaluating models on existing datasets.

Key Insights and Ideas

  • Chiral Lyotropic Liquid Crystals from Achiral Polymers: The combination of regio-symmetric and amphiphilic side chains ([C10]2-CO-[OE3]2) on an otherwise achiral polymer backbone led to the formation of chiral, lyotropic liquid crystalline phases in chloroform solutions. This chirality persisted in thin films, demonstrating that side-chain design can induce supramolecular chirality.
  • Side-Chain Symmetry Dictates Order: Regio-symmetric polymers ([C10]2 and [C10]2-CO-[OE3]2) exhibited significantly higher solid-state order and larger lamellar stacking distances compared to their regio-asymmetric counterparts ([CH3-C10] and [CH3-C10-CO-CH3-OE3]), even after thermal annealing.
  • Thermal Annealing is Crucial for High Order: While as-cast films showed some ordering, thermal annealing (heating above the melt temperature followed by slow cooling) dramatically improved the crystallinity and lamellar coherence lengths, leading to highly ordered, edge-on structures in many cases.
  • Amphiphilicity Enhances Doping/Dedoping: Polymers with amphiphilic side chains (especially those with oligoether groups) exhibited lower oxidation potentials and significantly faster doping/dedoping kinetics, leading to improved electrochromic switching speeds and higher optical contrast.
  • Side-Chain Polarity Influences Electrolyte Interaction: The presence of polar oligoether side chains ([OE3]2) improved polymer swelling in the electrolyte, facilitating oxidation and enhancing charge transport.
  • Metastable Chiral Phases: The chiral lyotropic phase observed in solution for [C10]2-CO-[OE3]2 could be kinetically trapped as a metastable phase in as-cast films, highlighting the influence of processing conditions (like rapid solvent evaporation in blade coating).

Key Results

  • Liquid Crystallinity: The regio-symmetric, amphiphilic PAcDOT ([C10]2-CO-[OE3]2) formed chiral lyotropic liquid crystals in chloroform solutions, which persisted in solid films.
  • Enhanced Crystallinity via Annealing: Thermal annealing increased lamellar coherence lengths by up to 400% for regio-asymmetric polymers and 280% for regio-symmetric polymers, leading to highly ordered structures.
  • Improved Doping Kinetics: Amphiphilic and regio-asymmetric PAcDOTs showed faster doping/dedoping kinetics (time constants as low as 0.23 s) compared to nonpolar, regio-symmetric counterparts (time constants around 0.6-1.6 s).
  • Lowered Oxidation Potentials: Polymers with oligoether side chains showed significantly lower oxidation potentials (e.g., 290-340 mV lower) compared to their alkyl-only counterparts.
  • Structural Differences: Regio-symmetric polymers had approximately 20-30% larger (100) lamellar stacking distances than regio-asymmetric polymers.

Limitations and Future Work

  • Metastable Phases: The study highlights that processing methods like blade coating can lead to kinetically trapped, metastable phases, particularly for chiral systems. Understanding how to reliably access and control these phases is an ongoing challenge.
  • Doping Inhibition in Highly Ordered Regions: While high crystallinity is generally beneficial, the highly ordered regions in annealed [C10]2 showed incomplete bleaching during doping, suggesting that excessive crystallinity or side-chain density can hinder electrolyte penetration and complete doping.
  • Future Directions: The authors suggest incorporating these design principles (regio-symmetry, amphiphilicity) into existing high-performance polymer backbones (e.g., more planar structures, less dense side chains) to create polymers with unique solution and solid-state morphologies. They also point to the exciting potential of creating mesoscale chiral structures from achiral repeat units for novel optoelectronic applications. Further exploration into controlling the assembly of conjugated polymers from solution to solid-state is also proposed.

Summary updated

Abstract

Conformationally flexible side-chains on conjugated polymers promote solution processability while significantly impacting solution aggregation, solid-state ordering, and polymer-electrolyte interactions. These side-chains can strongly influence the repeat unit symmetry, polarity, steric bulk, and noncovalent interactions that collectively dictate how polymer chains pack and assemble. Acyclic dioxythiophene polymers (PAcDOTs) are highly redox-active thiophene-based organic mixed ionic-electronic conductors (OMIECs) where both the 3- and 4-positions of the thiophene ring are substituted by alkoxy groups. In this study, we explore the solution and solid-state structures of both symmetric (R1 = R2) and asymmetric (R1 ≠ R2) PAcDOTs, where R1 and R2 are both either nonpolar or amphiphilic, and we observe rich process-structure behavior. The combination of regio-symmetric and amphiphilic side-chains results in a chiral, lyotropic phase in chloroform solutions that persists as a metastable state in thin films. Temperature-dependent grazing incidence X-ray scattering and cross-polarized optical microscopy indicate that PAcDOTs with regio-symmetric linear side-chains can crystallize into highly ordered morphologies upon thermal treatment. Finally, we show that side-chain polarity, symmetry, and thermal annealing affect the electrochemical doping and dedoping processes.
BibTeX
@inproceedings{rinehart2025impact,
  author = {Joshua M. Rinehart and Zhuang Xu and Ziming Wang and Anna M. Österholm and Lucas Q. Flagg and Lee J. Richter and Chad R. Snyder and Ying Diao and John R. Reynolds},
  title = {{Impact of Side-Chain Polarity and Symmetry on the Structure and Properties of Acyclic Dioxythiophene Polymers}},
  booktitle = {Chemistry},
  year = {2025},
  doi = {10.1021/acs.chemmater.4c03394},
}
Figure