Immobilization of a Novel ESTBAS Esterase from Bacillus altitudinis onto an Epoxy Resin: Characterization and Regioselective Synthesis of Chloramphenicol Palmitate

Fengying Dong, Xudong Tang, Xiaohui Yang, Lin Lin, Dannong He, Wei WeiCatalysts 2019 · DOI

TL;DR

Researchers have successfully immobilized a novel esterase, EstBAS, from Bacillus altitudinis onto an epoxy resin. This immobilized enzyme exhibits enhanced stability and activity over a wider range of conditions, making it a promising biocatalyst for the regioselective synthesis of chloramphenicol palmitate, a valuable pharmaceutical derivative, with high efficiency and reusability.

What Problem Does This Paper Address?

Chloramphenicol is a potent antibiotic, but its use is limited by severe side effects and a bitter taste. Derivatization, particularly esterification, is a strategy to improve its properties. However, achieving regioselective esterification of chloramphenicol's multiple hydroxyl groups using traditional chemical methods is challenging, often requiring complex protection/deprotection steps and leading to lower yields. Biocatalysis, specifically using enzymes like lipases or esterases, offers a more selective and efficient alternative. While some esterases have been explored for this purpose, there's a continuous need for novel enzymes with high activity, regioselectivity, and industrial applicability. Furthermore, free enzymes often suffer from poor stability and difficult recycling, hindering their large-scale use. Immobilization is a key strategy to overcome these limitations.

Methods

The study involved several key steps:

  • Gene Cloning and Expression: The estBAS gene from Bacillus altitudinis was cloned and expressed in Escherichia coli. A version of the esterase lacking its signal peptide (EstBASΔSP) was specifically produced for immobilization.
  • Enzyme Purification: The recombinant EstBASΔSP was purified using Ni-NTA affinity chromatography.
  • Immobilization: The purified EstBASΔSP was covalently immobilized onto a novel epoxy resin (Lx-105s). This process was optimized for enzyme loading and immobilization time.
  • Characterization:
    • FTIR Spectroscopy: Used to confirm the successful immobilization of the enzyme onto the epoxy resin by identifying characteristic functional groups.
  • Enzymatic Activity Assays: The activity of both free and immobilized enzymes was measured using p-nitrophenyl esters (p-NPs) of varying fatty acid chain lengths to determine substrate specificity.
  • pH and Temperature Stability: The optimal pH and temperature ranges, as well as thermal stability, were assessed for both free and immobilized enzymes.
  • Organic Solvent Tolerance: The enzymes' stability in the presence of common organic solvents was evaluated.
  • Metal Ion and Detergent Effects: The influence of various metal ions and detergents on enzyme activity was investigated.
  • Biocatalytic Synthesis: The immobilized EstBASΔSP was used as a biocatalyst for the regioselective synthesis of chloramphenicol palmitate from chloramphenicol and vinyl palmitate.
  • Product Analysis: The synthesized chloramphenicol palmitate was identified and characterized using techniques like TLC, HPLC, and FTIR.
  • Reusability Studies: The ability of the immobilized enzyme to be reused for multiple reaction cycles was assessed.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Novel Esterase Discovery: The identification and characterization of a new esterase (EstBAS) from Bacillus altitudinis with promising enzymatic properties.
  • Effective Immobilization Strategy: The successful covalent immobilization of EstBASΔSP onto an epoxy resin (Lx-105s) significantly enhanced its performance. This highlights the utility of epoxy resins for enzyme immobilization due to their reactive functional groups.
  • Improved Enzyme Performance: Immobilization not only increased the enzyme's loading capacity but also broadened its operational window, making it more robust and versatile.
  • Regioselective Synthesis Breakthrough: The immobilized enzyme demonstrated high regioselectivity, specifically targeting the primary hydroxyl group of chloramphenicol for esterification, a critical step for producing improved drug derivatives.
  • Industrial Potential: The combination of high conversion efficiency, excellent reusability, and enhanced stability suggests strong potential for industrial applications.

Key Results

  • Enzyme Activity: EstBASΔSP showed optimal activity at 50 °C and pH 8.0.
  • Immobilization Yield: A high loading capacity of 96 mg/g was achieved for EstBASΔSP on the Lx-105s epoxy resin.
  • Enhanced Stability:
    • The optimal temperature for the immobilized enzyme (Lx-EstBASΔSP) shifted to 60 °C.
  • Lx-EstBASΔSP retained over 35% activity at 90 °C, a significant improvement over the free enzyme.
  • The half-life of Lx-EstBASΔSP at 60 °C was 105 minutes, compared to 28 minutes for the free enzyme.
  • Immobilization improved storage stability, with Lx-EstBASΔSP retaining >85% activity after six weeks at 4 °C, while the free enzyme lost ~80% activity in less than three weeks.
  • Lx-EstBASΔSP exhibited excellent tolerance to organic solvents (e.g., retaining 92.5% activity in 90% ethanol).
  • Chloramphenicol Palmitate Synthesis:
    • Lx-EstBASΔSP achieved a conversion efficiency of 94.7% for chloramphenicol palmitate synthesis at 0.15 M substrate concentration after 24 hours.
  • The immobilized enzyme was reusable for seven cycles, retaining over 80% of its original activity.

Limitations and Future Work

  • Signal Peptide Role: While the study produced EstBASΔSP for immobilization, the specific role of the signal peptide in the native enzyme's function or purification was not deeply explored beyond its removal for better immobilization.
  • Mechanism of Solvent Tolerance: While improved organic solvent tolerance was observed, the precise molecular mechanisms behind this enhanced stability in the immobilized form could be further investigated.
  • Scale-Up Considerations: While the results show promise for industrial applications, further studies would be needed to optimize the process for large-scale production and economic feasibility.
  • Broader Applications: The study focused on chloramphenicol palmitate synthesis. Exploring the application of this immobilized esterase for the synthesis of other valuable esters or in different biocatalytic transformations could be a future direction.

Summary updated

Abstract

Novel gene estBAS from Bacillus altitudinis, encoding a 216-amino acid esterase (EstBAS) with a signal peptide (SP), was expressed in Escherichia coli. EstBASΔSP showed the highest activity toward p-nitrophenyl hexanoate at 50 °C and pH 8.0 and had a half-life (T1/2) of 6 h at 50 °C. EstBASΔSP was immobilized onto a novel epoxy resin (Lx-105s) with a high loading of 96 mg/g. Fourier transform infrared (FTIR) spectroscopy showed that EstBASΔSP was successfully immobilized onto Lx-105s. In addition, immobilization improved its enzymatic performance by widening the tolerable ranges of pH and temperature. The optimum temperature of immobilized EstBASΔSP (Lx-EstBASΔSP) was higher, 60 °C, and overall thermostability improved. T1/2 of Lx-EstBASΔSP and free EstBASΔSP at 60 °C was 105 and 28 min, respectively. Lx-EstBASΔSP was used as a biocatalyst to synthesize chloramphenicol palmitate by regioselective modification at the primary hydroxyl group. Conversion efficiency reached 94.7% at 0.15 M substrate concentration after 24 h. Lx-EstBASΔSP was stable and could be reused for seven cycles, after which it retained over 80% of the original activity.
BibTeX
@inproceedings{dong2019immobilization,
  author = {Fengying Dong and Xudong Tang and Xiaohui Yang and Lin Lin and Dannong He and Wei Wei and Dongzhi Wei},
  title = {{Immobilization of a Novel ESTBAS Esterase from Bacillus altitudinis onto an Epoxy Resin: Characterization and Regioselective Synthesis of Chloramphenicol Palmitate}},
  booktitle = {Catalysts},
  year = {2019},
  doi = {10.3390/catal9070620},
}
Figure