Image quality metrics for restricted gamut images produced by laser-induced printing on plasmonic films

Nathalie Destouches, Nicolas Dalloz, Aldi Wista Fadhilah, Rémi EmonetJournal of the European Optical Society Rapid Publications 2025 · DOI

TL;DR

This paper develops a new framework for evaluating image quality in laser-printed plasmonic films, which offer high-security "multiplexed" images but suffer from severely restricted color gamuts. By combining psychophysical observer studies with statistical modeling (ANOVA and AIC), the researchers identified a specific set of objective metrics—primarily focusing on luminance range and color volume—that accurately predict how humans perceive quality in these unconventional color spaces.

What Problem Does This Paper Address?

Laser-induced printing on plasmonic metasurfaces (thin films containing metallic nanoparticles) is a promising tech for high-speed, high-resolution, and tamper-proof marking, especially for security documents like passports. A unique feature is "multiplexing": an image can look different depending on whether you view it in reflection or transmission.

However, there’s a catch: the achievable color gamut is tiny—often only about 15% of the standard sRGB space. These images frequently lack saturation, have unusual "shapes" in color space (e.g., they might only produce yellows and greens), and exhibit low contrast. Standard Image Quality Assessment (IQA) metrics like PSNR or SSIM are great at detecting blur or noise, but they fail to capture the "perceptual disappointment" of a restricted color gamut. This paper seeks to find which objective mathematical metrics actually align with human preference when colors are forced into these tight constraints.

Methods

The researchers took a multi-step approach to bridge the gap between math and human perception:

  1. Gamut Simulation: They defined six distinct color gamuts: three based on real laser-processed samples, one "intentionally bad" synthetic gamut, one simulated inkjet gamut, and one "Portrait" gamut optimized for skin tones.
  2. Subjective Study: 34 observers ranked 144 simulated images (24 source images across the 6 gamuts). They were asked to rank reproductions from 1 (most faithful to the original) to 6 (least faithful).
  3. Metric Selection: The team started with 20 candidate metrics, ranging from standard ones (MSE, SSIM) to color-specific ones (Convex hull area of $a^*b^*$, Maximum chroma, Image colorfulness).
  4. Statistical Modeling: They used One-way ANOVA to determine which metrics significantly influenced rankings and the Akaike Information Criterion (AIC) to select the most "parsimonious" model—the one that provides the best fit with the fewest variables to avoid overfitting.

Datasets

  • Source Images: A set of 24 images including 8 portraits with various skin tones, landscapes, and colorful objects (e.g., a color checker, flowers).
  • Gamuts: 6 specific color spaces used to re-map the source images.
  • Observer Data: Rankings from 34 participants (mostly with backgrounds in color science or image processing).
  • Code/Data Availability: The researchers have made their survey data and intermediate metric calculations available on GitHub.

Key Insights and Ideas

  • Content-Dependent Quality: The "best" gamut depends on what you're looking at. For portrait images, a high-contrast but low-color gamut (the "Portrait" gamut) was often preferred over a full-color inkjet gamut if the latter lacked sufficient contrast.
  • The "Aha" Metrics: Two metrics stood out as heavy hitters across all image types: $M4$ (Delta Luminance) and $M9$ (Convex hull area of $a^*b^*$). Essentially, humans care most about the total range of brightness available and the total "volume" of color the system can produce.
  • Thresholding Colorfulness: The researchers found that the model works better if you split images into two groups based on their inherent colorfulness (using the Hasler metric). For "dull" images, minimum luminance ($M3$) and maximum chroma ($M5$) are vital; for "vivid" images, Mean Squared Error (MSE) and white-point distance ($M16$) become more important.
  • Luminance Trumps Saturation: In restricted gamuts, maintaining a wide range of light-to-dark (luminance) is often more important for perceived quality than trying to force high color saturation.

Key Results

  • High Predictive Power: The final linear regression models achieved an $R^2$ value of 0.873, indicating a very strong correlation between the predicted ranks and actual human rankings.
  • Model Accuracy: The confusion matrix showed that the model correctly predicted the rank (within a small tolerance) for 138 out of 144 test cases.
  • Metric Hierarchy: The study successfully narrowed down 20 confusing metrics to a vital few: $M4, M9, M3,$ and $M5$ for low-colorfulness images, and $M4, M9, M11, M16,$ and $MSE$ for high-colorfulness images.

Limitations and Future Work

  • Observation Mode: This study focused primarily on "backside reflection" mode. The authors note that colors in "transmission" mode behave differently and require further validation (though preliminary tests in Appendix B look promising).
  • Illuminant Sensitivity: One key metric ($M16$, white point distance) is highly sensitive to the light source used during viewing. The model might need recalibration if the viewing environment changes from standard daylight to warm LED.
  • Display Constraints: The study was conducted on uncalibrated personal monitors (due to the remote nature of the survey). While relative ranking mitigates this, a controlled lab environment might yield even tighter data.
  • Expansion: Future work aims to integrate these metrics into the laser-processing loop to automatically optimize laser parameters for the best possible visual output.

Summary updated

Abstract

Laser-induced printing is a low-cost, high-speed, non-contact method of marking large, high-resolution images. Implemented on thin films containing metallic nanoparticles, the technique allows for the printing of color images with visual effects. However, these images typically have a limited color gamut compared to inkjet printing. This limitation is due to the inability to achieve high levels of saturation for all colors and to cover the sRGB hue range. While common quality metrics focus primarily on aspects such as resolution or blur, they rarely address the color aspect. This study proposes a methodology to provide image quality metrics adapted to color gamuts with unusual shapes and volumes. It aims to rank them in terms of image quality performance for any given image. In particular, this work focuses on gamuts measured in transmission and reflection that are not necessarily centered on the CIE a*b* plane and may exhibit low contrast. Psychophysical studies have been conducted to evaluate the quality of images simulated with different color gamuts. The same images were evaluated using different metrics, and an analysis based on the ANOVA model was used to determine a set of metrics that explain observers’ preferences.
BibTeX
@article{destouches2025image,
  author = {Nathalie Destouches and Nicolas Dalloz and Nicolas Dalloz and Aldi Wista Fadhilah and Rémi Emonet and Nathalie Destouches},
  title = {{Image quality metrics for restricted gamut images produced by laser-induced printing on plasmonic films}},
  journal = {Journal of the European Optical Society Rapid Publications},
  year = {2025},
  doi = {10.1051/jeos/2025025},
}
Figure