Abstract
Although microscopes and image analysis software for electron cryomicroscopy (cryo-EM) have improved dramatically in recent years, specimen preparation methods have lagged behind. Most strategies still rely on blotting microscope grids with paper to produce a thin film of solution suitable for vitrification. This approach loses more than 99.9% of the applied sample and requires several seconds, leading to problematic air-water interface interactions for macromolecules and complicating time-resolved studies. Recently developed self-wicking EM grids allow use of small volumes of sample, with nanowires on the grid bars removing excess solution to produce a thin film within tens of milliseconds. Here we present Shake-it-off (SIO), a simple cryo-EM specimen preparation device that uses components from an ultrasonic humidifier to transfer protein solution onto a self-wicking EM grid. Controlled by a Raspberry Pi, the device is constructed from widely available or easily manufactured components, allowing laboratories to build their own instruments. This open-source design permits straightforward customization for specialized experiments, such as high-speed, low-volume specimen preparation.
Introduction
The "resolution revolution" in cryo-electron microscopy (cryo-EM) has been driven by breakthroughs in direct electron detectors and sophisticated image processing algorithms. However, the physical process of preparing specimens—transforming a liquid protein solution into a thin, vitrified film—has remained a significant bottleneck. The standard technique, manual or automated blotting, involves applying microliters of sample to a grid and pressing it with filter paper. This method is not only inefficient, wasting nearly all of the precious sample, but also slow. The seconds-long delay between blotting and freezing allows proteins to interact with the air-water interface, often leading to denaturation or preferred orientations that hinder 3D reconstruction.
To address these challenges, the Shake-it-off (SIO) device was developed as an inexpensive, open-source alternative to high-end commercial specimen preparation systems. By combining ultrasonic spraying with self-wicking grid technology, SIO enables rapid vitrification with minimal sample volume.
System Design and Methodology
The SIO device is built on a philosophy of accessibility and modularity. It avoids proprietary components in favor of hobbyist electronics and 3D-printed parts.
Ultrasonic Spraying
Rather than using filter paper to thin the sample, SIO utilizes a piezoelectric transducer salvaged from a low-cost ($5) novelty humidifier. When activated by a short (5 ms) electrical pulse, the transducer aerosolizes the protein solution, depositing approximately 50 nL of sample onto the grid. This "spray-on" approach eliminates the mechanical stress of blotting and significantly reduces sample waste.
Self-Wicking Grids
Because the device does not use paper to remove excess liquid, it relies on "self-wicking" grids. These grids are treated to grow copper hydroxide ($Cu(OH)_2$) nanowires on the grid bars. These nanowires act as a microscopic sponge, wicking away the bulk of the sprayed droplets to leave a thin film across the grid holes within milliseconds.
Automation and Control
The entire sequence—triggering the sprayer, retracting the piezo element, and plunging the grid into a liquid propane/ethane bath—is coordinated by a Raspberry Pi 3B+ running a custom Python script. This setup allows for precise temporal control, achieving a total time from sample application to freezing of approximately 90–100 ms.
Experimental Validation
To validate the SIO device, the authors prepared specimens of horse spleen apoferritin, a standard benchmark in the field. Data collection was performed on a Titan Krios G3 electron microscope, capturing 324 high-resolution movies.
The resulting dataset of 172,469 particle images yielded a 3D reconstruction at 2.6 Å resolution. This result demonstrates that the SIO device is capable of producing specimen grids of a quality comparable to industry-standard commercial plungers, while using a fraction of the sample volume and operating at much higher speeds.
Discussion
Democratizing Instrumentation
One of the primary contributions of this work is the democratization of structural biology tools. By utilizing a Raspberry Pi, 3D-printed polycarbonate components, and repurposed consumer electronics, the SIO device can be assembled in laboratories without specialized instrument-design expertise. All design files and software are available on GitHub, encouraging community-driven improvements and customization.
Speed and Sample Integrity
The high-speed nature of the SIO process (~100 ms) is critical for sample integrity. By drastically reducing the time proteins spend in a thin film before vitrification, the device minimizes the damaging effects of the air-water interface. Furthermore, the modular design, featuring magnetic connectors and standard optical breadboard parts, makes the device an ideal platform for "mix-and-freeze" experiments, where researchers wish to capture short-lived intermediate states of biochemical reactions.
Limitations and Future Directions
While the SIO device is a powerful proof-of-concept, several areas for refinement remain:
- Ice Uniformity: Current grids exhibit a gradient of ice thickness, with a central thick region surrounded by a usable "sweet spot." Improving the spray pattern for more uniform coverage is a priority.
- Alignment: The manual alignment of the sprayer and grid can be tedious; future iterations may incorporate a 3D-printed XYZ-positioning stage.
- Droplet Physics: Further characterization of the droplet size distribution from the ultrasonic transducer will help optimize the device for a wider variety of protein concentrations and buffers.
In conclusion, Shake-it-off provides a high-performance, low-cost solution for cryo-EM specimen preparation, proving that sophisticated structural biology research can be supported by simple, open-source hardware.
Summary updated