In Situ Electrohydrodynamic Jet Printing-Based Fabrication of Tunable Microlens Arrays

Ya Zhong, Haibo Yu, Peilin Zhou, Yangdong Wen, Wenxiu Zhao, Wuhao Zou, Hao Luo, Yuechao Wang, Lianqing LiuACS 2021 · DOI

Abstract

Tunable microlens arrays (MLAs) with controllable focal lengths have been extensively used in optical sensors, biochips, and electronic devices. The commonly used method is electrowetting on dielectric (EWOD) that controls the contact angle of the microlens to adjust the focal length. However, the fabrication of tunable MLAs at the microscale remains a challenge because the size of MLAs is limited by the external electrodes of EWOD. In this study, a highly integrated planar annular microelectrode array was proposed to achieve an electrowetting tunable MLA. The planar microelectrode was fabricated by electrohydrodynamic jet (E-jet) printing and the liquid microlens was then deposited <i>in situ</i> on the microelectrode. This method could realize 36 tunable liquid microlenses with an average diameter of 24 μm in a 320 × 320 μm<sup>2</sup> plane. The fabricated tunable MLAs with higher integration levels and smaller sizes can be beneficial for cell imaging, optofluidic systems, and microfluidic chips.
BibTeX
@inproceedings{zhong2021i,
  author = {Ya Zhong and Haibo Yu and Peilin Zhou and Yangdong Wen and Wenxiu Zhao and Wuhao Zou and Hao Luo and Yuechao Wang and Lianqing Liu},
  title = {{<i>In Situ</i> Electrohydrodynamic Jet Printing-Based Fabrication of Tunable Microlens Arrays}},
  booktitle = {ACS},
  year = {2021},
  doi = {10.1021/acsami.1c06205},
}

Loading related content...

Figure