Hydrodynamic Analysis-Based Modeling and Experimental Verification of a New Water-Jet Thruster for an Amphibious Spherical Robot

Xihuan Hou, Shuxiang Guo, Liwei Shi, Huiming Xing, Yu Liu, Huikang Liu, Yao Hu, Debin Xia, Zan Li2019 · DOI

TL;DR

This paper presents a novel thrust model for a water-jet thruster designed for amphibious spherical robots. By combining computational fluid dynamics (CFD) simulations with hydromechanics theory, they developed and experimentally validated a model that accurately predicts thrust, crucial for precise motion control of these complex robots.

What Problem Does This Paper Address?

Amphibious robots are increasingly important for operating in challenging environments, bridging land and water. Accurate motion control is paramount for their effectiveness, and the propulsion system, particularly the thrusters, plays a critical role. Existing water-jet thrusters have limitations in providing sufficient thrust for heavier, sensor-laden amphibious robots. To address this, the authors developed a new water-jet thruster for their amphibious spherical robot (ASR-IV). However, to achieve precise motion control, an accurate mathematical model of this new thruster is essential. This paper tackles the problem of developing and validating such a thrust model, considering factors like rotational speed, inlet velocity, and oblique flow conditions.

Methods

The core of this research lies in a hybrid approach:

  • Computational Fluid Dynamics (CFD): The authors employed ANSYS CFX to simulate the hydrodynamic performance of the water-jet thruster. They used the moving reference frame (MRF) technique to model propeller rotation and analyzed the thruster's behavior in both axial and oblique flow conditions. The computational domain was carefully established and meshed to balance accuracy and efficiency.
  • Hydromechanics Theory: They built a theoretical thrust model based on momentum theory (disk actuator theory). This theory treats the propeller as an ideal actuator disc and relates thrust to the change in momentum of the fluid passing through it.
  • Parameter Identification: Crucially, the parameters of the theoretical hydromechanics model were not assumed but were identified using the results obtained from the CFD simulations. This integration allows the theoretical model to capture the specific characteristics of the new thruster.
  • Experimental Verification: To validate both the CFD simulations and the developed thrust model, a comprehensive experimental setup was designed. This included a force measurement device (BL six-axis load cell sensor) and an adjusting angle mechanism to test the thruster under various rotational speeds and flow conditions (axial and oblique).

Datasets

Not discussed in the paper. The paper focuses on simulation and experimental data generated by the authors for their specific thruster design.

Key Insights and Ideas

  • Synergy of CFD and Theory: The paper demonstrates the power of combining CFD simulations with established hydromechanics principles. CFD provides detailed flow behavior, which is then used to "tune" a theoretical model, leading to a more accurate and physically grounded representation than either method alone.
  • Oblique Flow Significance: The study highlights that for amphibious robots operating in varied conditions, understanding performance in oblique flow is critical. They found that the axial component of the incoming flow has a dominant effect on thrust, while the tangential component has a lesser influence.
  • Nozzle Diameter Optimization: The research systematically investigated the impact of nozzle diameter on thrust, using a design exploration method. This led to the identification of an optimal nozzle diameter range for maximizing thrust.
  • Thrust Model Accuracy: The developed thrust model, validated against experimental data, shows a maximum error of only 7%, indicating its high precision and suitability for real-world applications.

Key Results

  • Thrust Model Validation: The thrust model-based simulation results showed excellent agreement with experimental data, with a maximum error of 7% across various flow velocities and oblique angles.
  • Oblique Flow Impact: In oblique flow, the axial velocity component of the incoming flow is the primary driver of thrust, similar to axial flow conditions. The tangential component has a minimal impact.
  • Nozzle Diameter Optimization: The optimal nozzle diameter was found to be in the range of 20-25 mm, representing about 12.2% of the total permissible nozzle diameter.
  • Advance Coefficient Effects: Thrust coefficient decreases with increasing advance coefficient, while efficiency generally increases within the tested range.

Limitations and Future Work

  • DC Motor Model Neglected: The current thrust model focuses solely on the propeller's hydrodynamic performance and disregards the influence of the DC motor model on propeller rotational speed. Future work could incorporate this for a more complete system model.
  • Experimental Environment: The authors acknowledge that experimental environment and equipment limitations may have introduced some errors, though they mitigated this by collecting a large amount of data.
  • Future Research: The paper suggests that further research will focus on building a complete motion controller for the amphibious robot, leveraging the validated thrust model. This includes developing a more comprehensive model of the amphibious spherical robot itself.

Summary updated

BibTeX
@misc{hou2019hydrodynamic,
  author = {Xihuan Hou and Shuxiang Guo and Liwei Shi and Huiming Xing and Yu Liu and Huikang Liu and Yao Hu and Debin Xia and Zan Li},
  title = {{Hydrodynamic Analysis-Based Modeling and Experimental Verification of a New Water-Jet Thruster for an Amphibious Spherical Robot}},
  year = {2019},
  doi = {10.3390/s19020259},
}

Loading related content...

Figure