How the Texture Density Affect Dynamics of a Single Acoustic Cavitation Bubble Near a Skin-Like Wall in Sonophoresis Applications

Yongzhen Jin, Tianshu Zhang, Yan Yang, Hui Chen, Yuanyuan Li, Hao WuIEEE Access 2024 · DOI

Executive Summary

This research investigates the impact of skin texture density on the behavior of microscopic bubbles during ultrasound-assisted drug delivery, a process known as sonophoresis. By utilizing high-speed photography and flexible skin-mimicking membranes, the study reveals that higher texture densities significantly delay bubble collapse. Crucially, ultra-high texture densities can lead to more intense microjets, suggesting that clinical ultrasound parameters must be tailored to individual skin types to ensure efficacy without causing tissue damage.

Introduction: The Role of Acoustic Cavitation in Sonophoresis

Low-frequency ultrasound skin permeation technology (LUSPT) is a promising non-invasive method for needle-free drug delivery and the extraction of interstitial fluids. The core mechanism of LUSPT is acoustic cavitation: ultrasound waves generate microscopic bubbles in a coupling gel that collapse near the skin's surface. This collapse creates high-velocity microjets and shockwaves that temporarily permeabilize the stratum corneum, the skin's outermost protective layer.

While the physics of bubbles near rigid, flat surfaces is well-understood, human skin is both elastic and characterized by complex textures. This paper addresses the critical gap in understanding how the specific density of these textures—the "grooves" and "channels" inherent to human skin—influences the life cycle and destructive potential of cavitation bubbles.

Experimental Methodology

To capture events occurring on a microsecond scale, researchers developed a specialized experimental framework:

  • Skin-Mimicking Membranes: Polydimethylsiloxane (PDMS), a flexible polymer, was used to fabricate walls with four distinct texture densities ($D_t$): 1, 25, 100, and 400 channels per $mm^2$.
  • High-Speed Imaging: A camera operating at 480,000 frames per second recorded the birth, oscillation, and collapse of single bubbles in a 20.51 kHz ultrasonic field.
  • Quantitative Analysis: Fiji (ImageJ) software was employed to track bubble margins and calculate the velocities of microjets produced during the collapse phase.

Dynamics of Bubble Interaction with Textured Surfaces

The study identified several critical phenomena influenced by surface geometry:

The Texture Delay Effect

As texture density increases, the flow field around the bubble becomes increasingly complex. This complexity creates a "cushioning" effect that impedes the bubble's movement toward the wall, resulting in a linear increase in the time to the first collapse ($t_c$).

Morphological Transitions

At lower texture densities, bubbles often adopt a "mushroom" shape as they are compressed into surface grooves. However, at ultra-high densities ($D_t = 400 \text{ mm}^{-2}$), this shape disappears. The "ribs" or walls between channels become so thin that they deform easily under pressure, offering minimal resistance to the bubble's expansion and contraction.

The Thin-Wall Paradox

Counterintuitively, ultra-high density surfaces do not necessarily dampen bubble energy. Because the thin walls lose structural integrity, they fail to restrict the bubble's collapse. This leads to a "considerable increase" in microjet velocity during later collapse cycles compared to lower-density surfaces where the walls remain more rigid and restrictive.

Key Results and Clinical Implications

  • Collapse Timing: The time to the first collapse increased significantly with texture density, moving from approximately 120 $\mu$s at low density to 171 $\mu$s at ultra-high density.
  • Microjet Velocity: While low-to-medium density surfaces showed a typical "rise and fall" velocity pattern across three collapse cycles, the $D_t = 400$ benchmark exhibited sustained high velocities in the third cycle due to the lack of wall restriction.
  • Cycle Consistency: Despite changes in collapse timing, the interval between subsequent collapses remained consistently tied to the ultrasound frequency (approx. 50 $\mu$s).

From a clinical perspective, these findings suggest that patients with higher skin texture density may require adjusted treatment protocols. The authors conclude that clinicians should consider reducing ultrasound intensity to avoid irreversible skin damage while increasing treatment duration to compensate for the delayed cavitation effects.

Limitations and Future Directions

The study notes that even at 480,000 fps, the peak velocity of the initial (and fastest) microjet may not have been fully captured. Furthermore, while PDMS mimics skin elasticity, it lacks the biological complexity of human tissue, such as hair follicles and sebum. Future research should transition from single-bubble dynamics to "bubble clouds" to better simulate the multi-bubble interactions present in real-world sonophoresis conditions.

Summary updated

BibTeX
@article{jin2024how,
  author = {Yongzhen Jin and Tianshu Zhang and Yan Yang and Hui Chen and Yuanyuan Li and Hao Wu},
  title = {{How the Texture Density Affect Dynamics of a Single Acoustic Cavitation Bubble Near a Skin-Like Wall in Sonophoresis Applications}},
  journal = {IEEE Access},
  year = {2024},
  doi = {10.1109/access.2024.3369182},
}
Figure