Hot-electron-assisted S-scheme heterojunction of tungsten oxide/graphitic carbon nitride for broad-spectrum photocatalytic H2 generation

Qinqin Liu, Xudong He, Jinjun Peng, Xiaohui Yu, Hua Tang, Jun ZhangCHINESE 2021 · DOI

TL;DR

Researchers have developed a novel photocatalyst by combining tungsten oxide (W18049) nanowires with graphitic carbon nitride (g-C3N4) nanosheets. This "S-scheme heterojunction" effectively utilizes a broader spectrum of sunlight, including visible light, to generate hydrogen gas from water with significantly improved efficiency compared to previous methods. The key innovation lies in the "hot-electron assisted" mechanism, where W18049 acts as a light-harvesting antenna and electron donor, boosting the overall catalytic process.

What Problem Does This Paper Address?

The global energy crisis and the urgent need for sustainable energy sources have driven significant research into photocatalytic water splitting for hydrogen production. Semiconductor photocatalysts are a promising avenue, but their efficiency is often limited by two main factors: a narrow light absorption range (typically only visible light) and the rapid recombination of photogenerated electron-hole pairs, which reduces their catalytic activity. While heterojunctions are a common strategy to address these issues by creating new interfaces for charge separation and extending light absorption, achieving high efficiency across a broad solar spectrum remains a challenge. This paper aims to overcome these limitations by designing a photocatalyst that not only absorbs a wider range of light but also facilitates efficient charge separation and utilizes "hot electrons" to enhance the hydrogen generation process.

Methods

The researchers employed a hydrothermal synthesis method to create the W18049/g-C3N4 heterojunction. The process involved preparing protonated g-C3N4 nanosheets (HCN) and then synthesizing W18049 nanowires onto these nanosheets.

Key characterization techniques used to analyze the material and its properties included:

  • Powder X-ray Diffraction (XRD): To determine the crystalline structure and phase purity of the materials.
  • Fourier-Transform Infrared (FT-IR) Spectroscopy: To identify functional groups and assess chemical interactions at the interface.
  • X-ray Photoelectron Spectroscopy (XPS): To analyze the elemental composition and chemical states of the materials, providing insights into charge transfer.
  • Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM): To visualize the morphology and microstructure of the synthesized materials, confirming the formation of the heterojunction.
  • UV-Vis Diffuse Reflectance Spectroscopy (DRS): To measure the light absorption properties of the materials across different wavelengths.
  • Electrochemical Techniques (Transient Photocurrents, Electrochemical Impedance Spectroscopy, Mott-Schottky Plots): To evaluate charge separation efficiency, interfacial charge transfer resistance, and band edge positions.
  • Photoluminescence (PL) and Time-Resolved Photoluminescence (TRPL) Spectroscopy: To study the recombination dynamics of photogenerated charge carriers.
  • Electron Spin Resonance (ESR) Spectroscopy: To identify and quantify the generation of active free radicals (like hydroxyl radicals) during photocatalysis.
  • First-Principle Density Functional Theory (DFT) Calculations: To theoretically model the work functions and band alignments of the individual components and predict charge transfer behavior.
  • Photocatalytic H2 Generation Test: The core evaluation method, where the synthesized materials were used to split water into hydrogen gas under simulated solar light irradiation, with hydrogen production quantified by gas chromatography.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of a novel material and its performance in a photocatalytic reaction.

Key Insights and Ideas

  • S-scheme Heterojunction for Enhanced Charge Separation: The combination of W18049 and g-C3N4 forms an S-scheme heterojunction. This specific band alignment allows for efficient transfer of electrons from the conduction band of W18049 to the valence band of g-C3N4, and vice-versa for holes. This "uphill" transfer, driven by a built-in electric field, effectively separates charge carriers, preventing their recombination and preserving their high redox potential.
  • Plasmonic W18049 as a "Light Antenna" and "Hot Electron Donor": W18049 nanowires exhibit Localized Surface Plasmon Resonance (LSPR), allowing them to absorb light over a broader spectrum, particularly in the visible and near-infrared regions. Crucially, upon light absorption, W18049 generates "hot electrons" – electrons with excess kinetic energy. These hot electrons can be injected into the g-C3N4, providing additional energetic charge carriers for the water reduction reaction, thus enhancing photocatalytic activity.
  • Synergistic Effect of 1D/2D Nanostructure: The 1D W18049 nanowires are effectively anchored onto the 2D g-C3N4 nanosheets, creating a well-defined heterojunction with intimate interfacial contact. This morphology maximizes the interface for charge transfer and light absorption.
  • Improved Hydrophilicity: The WOCN-3 hybrid showed significantly better water wettability (lower contact angle) compared to pure g-C3N4, which is beneficial for efficient interaction with the water reactant in photocatalysis.
  • Broader Light Absorption: DRS results clearly show that the W18049/g-C3N4 composite absorbs light over a wider range than pristine g-C3N4, extending into the visible spectrum due to the LSPR of W18049.

Key Results

  • Enhanced H2 Production: The W18049/g-C3N4 (WOCN-3) composite exhibited significantly higher photocatalytic H2 generation activity compared to pristine g-C3N4. Under visible light irradiation (420-550 nm), the H2 production rate of WOCN-3 was 892 µmol·g⁻¹·h⁻¹, which is approximately 3.4 times higher than that of pure g-C3N4 (259 µmol·g⁻¹·h⁻¹).
  • High Activity Under Specific Wavelength: Under monochromatic light irradiation at 550 nm, the WOCN-3 hybrid achieved an H2 evolution rate of 41.5 µmol·g⁻¹·h⁻¹, while pure g-C3N4 and W18049 showed negligible activity. This highlights the effectiveness of the heterojunction and the plasmonic effect at this specific wavelength.
  • Improved Charge Separation: Transient photocurrent responses and EIS measurements showed that WOCN-3 had higher photocurrent density and lower interfacial charge transfer resistance, indicating more efficient charge separation and transfer.
  • Reduced Charge Recombination: PL and TRPL spectra revealed lower photoluminescence intensity and shorter fluorescence lifetimes for WOCN-3 compared to HCN, confirming reduced charge carrier recombination.
  • Broad Spectrum Response: The combination of W18049's LSPR and the S-scheme heterojunction allows for effective photocatalysis over a wider range of light wavelengths.

Limitations and Future Work

  • Limitations:
    • While the study demonstrates improved performance under visible light, the specific contribution of hot electrons from W18049 under different wavelengths could be further elucidated.
  • The stability of the catalyst was tested, showing no significant decrease in H2 generation over several cycles, but long-term stability under continuous operation and various environmental conditions could be explored further.
  • The paper mentions that the CB potential of W18049 alone might not be sufficient for H2 production, and the VB of HCN might not be suitable for OH generation, suggesting the S-scheme mechanism is crucial for overcoming these individual limitations.
  • Future Work:
    • The authors suggest that this work provides new insights for designing subsequent hot electron-assisted S-scheme heterojunction photocatalysts.
  • Further optimization of the W18049/g-C3N4 ratio and morphology could potentially lead to even higher efficiencies.
  • Exploring the application of this S-scheme heterojunction design to other photocatalytic reactions beyond H2 generation is a promising avenue.
  • Investigating the precise mechanism of hot electron injection and its role in the S-scheme transfer under various light conditions would be valuable.

Summary updated

BibTeX
@inproceedings{liu2021hot,
  author = {Qinqin Liu and Xudong He and Jinjun Peng and Xiaohui Yu and Hua Tang and Jun Zhang},
  title = {{Hot-electron-assisted S-scheme heterojunction of tungsten oxide/graphitic carbon nitride for broad-spectrum photocatalytic H2 generation}},
  booktitle = {CHINESE},
  year = {2021},
  doi = {10.1016/s1872-2067(20)63753-6},
}
Figure