Abstract
The Canadian Hydrogen Intensity Mapping Experiment (CHIME) Pathfinder radio telescope is currently surveying the northern hemisphere between 400 and 800 MHz. By mapping the large scale structure of neutral hydrogen through its redshifted 21 cm line emission between $z \sim 0.8-2.5$, CHIME will contribute to our understanding of Dark Energy. Bright astrophysical foregrounds must be separated from the neutral hydrogen signal, a task which requires precise characterization of the polarized telescope beams. Using the DRAO John A. Galt 26 m telescope, we have developed a holography instrument and technique for mapping the CHIME Pathfinder beams. We report the status of the instrument and initial results of this effort.
Introduction: The Challenge of Foreground Removal
The primary goal of CHIME is to detect the faint 21 cm emission from neutral hydrogen to probe the expansion history of the universe. However, this cosmological signal is buried under astrophysical foregrounds—primarily synchrotron radiation from our own Galaxy—that are approximately five orders of magnitude ($10^5$) stronger than the target signal.
Extracting the hydrogen signal requires an extremely accurate model of the telescope's beam response. Even minor errors, such as a 0.1% discrepancy in beam width characterization, can lead to "mode mixing," where foreground power leaks into the cosmological data and masks the signal. This paper presents a method using point-source holography to achieve the necessary precision in beam mapping.
Methodology: Point-Source Holography
The research team utilized the John A. Galt 26 m telescope at the Dominion Radio Astrophysical Observatory (DRAO) as a reference antenna. Unlike the stationary CHIME Pathfinder, the 26 m dish is a steerable tracking telescope.
As shown in the signal chain diagram, the signals from the 26 m dish and the Pathfinder's 256 inputs are fed into a common correlator. By cross-correlating these signals, the Pathfinder’s individual feed responses are isolated. The process involves "fringestopping" to remove geometric phase delays, RFI mitigation, and high-pass filtering to stabilize gain. By observing multiple calibrators at different declinations, the team can reconstruct 2D beam maps from 1D transit slices.
Observations and Data
The study leveraged observations of several bright astronomical calibrators, including Cygnus A, Taurus A, Virgo A, and Cassiopeia A. Secondary calibrators like Hercules A and 3C 295 provided additional coverage. Beam normalization was performed using historical spectral data from established catalogs including Baars et al. (1977), NVSS, and others.
Analysis and Key Findings: Ripples and Distortions
A significant discovery was a 30 MHz periodic "ripple" in the beam's Full Width at Half Maximum (FWHM). This interference pattern is caused by standing waves between the focal line and the reflector surface.
Additionally, the data identified physical artifacts in the Pathfinder's construction:
- Misalignment: The cylinders were found to be rotated 1.9 degrees from celestial North.
- Surface Scalloping: The mesh material used for the reflectors caused medium-scale surface distortions, which significantly increased sidelobe levels.
- Redundancy Issues: Variations in individual feed beams were found to break the assumption of redundancy, a critical factor for CHIME's calibration pipeline which assumes identical feed responses.
Results and Performance
The holographic technique successfully recovered high signal-to-noise 1D beam slices for all 256 feeds across the entire 400–800 MHz band. Initial 2D reconstructions confirmed the expected "plateau" shape but revealed more complex North-South structures than previous models. Crucially, measurements taken months apart showed high reproducibility, confirming the stability of the holographic instrument.
Conclusion and Future Outlook
While the current 2D maps are undersampled due to the limited number of available bright point sources, the technique has proven effective for identifying instrumental effects. Future work will involve observing more sources and potentially using alternative references like satellites or drones to fill in the gaps. These refined beam models are essential for the success of the full CHIME experiment in its mission to map the universe's large-scale structure.
Summary updated