Highly Tunable Light Absorber Based on Topological Interface Mode Excitation of Optical Tamm State

Xiangjun Liu, Jingxu Shi, Yixuan Wang, Shiyao Sun, Xiangfu Wang2024 · DOI

TL;DR

This paper introduces a novel, highly tunable optical absorber that leverages topological interface states (TISs) to excite optical Tamm states (OTSs). This design allows for multiple absorption channels and precise control over absorption rates, offering a promising platform for advanced optoelectronic devices.

What Problem Does This Paper Address?

Traditional optical absorbers, while effective, often suffer from limited absorption channels and difficulty in continuously tuning their absorption rates. This inflexibility restricts their application in scenarios requiring precise optical signal control. Existing absorbers often rely on metal layers, which introduce significant losses and further limit tunability. The authors aim to overcome these limitations by designing a new structure that offers enhanced tunability and multiple absorption channels without the drawbacks of metal-based designs.

Methods

The core of this work lies in the design and simulation of a novel optical absorber. The proposed structure consists of alternating layers of one-dimensional topological photonic crystals (1DTPCs) and a graphene nanocomposite (GNC) material.

  • Topological Photonic Crystals (1DTPCs): The researchers utilize "ABBA" and "BAAB" stacking sequences for their photonic crystals (PCX and PCY, respectively). These specific sequences are chosen for their topological properties, which are characterized by the Zak phase. This topological nature provides robustness against defects and enables the formation of protected interface states.
  • Graphene Nanocomposite (GNC): Graphene is incorporated into a host medium to create a GNC. The Maxwell-Garnett model is used to calculate the effective dielectric constant of this composite, taking into account the dielectric properties of graphene and the host, as well as the filling factor of graphene. The dielectric constant of graphene itself is described by a model that depends on Fermi energy, frequency, and relaxation time.
  • Optical Tamm States (OTSs) and Topological Interface States (TISs): The key mechanism exploited is the excitation of OTSs at the interface between the photonic crystal and the GNC. This excitation is facilitated by TISs, which arise at the boundaries between photonic crystal regions with different topological properties. The coupling of multiple TISs leads to multiple absorption peaks.
  • Four-by-Four Transfer Matrix Method (TMM): To analyze the optical response of the multilayered structure, the researchers employ the 4x4 TMM. This method allows for the calculation of transmission and reflection coefficients for both TE and TM polarized waves, which are then used to determine the absorptivity of the device. The TMM is also used to calculate the normalized electric field intensity distribution within the structure, providing insights into energy transfer and localization.

Datasets

Not discussed in the paper. The study relies on theoretical modeling and numerical simulations rather than experimental datasets.

Key Insights and Ideas

  • TISs as Excitation Mechanism for OTSs: The paper highlights that topological interface states (TISs) are not just for transmission but can effectively excite optical Tamm states (OTSs) at the interface with the GNC layer, leading to absorption.
  • Multi-Channel Absorption: By increasing the number of interfaces between the topologically distinct photonic crystals (PCX and PCY), the number of absorption channels can be directly controlled. This is a significant departure from single-channel absorbers.
  • Tunable Absorption Quality: The quality factor (Q) of the absorption peaks can be precisely tuned by adjusting the number of periods (N) in the photonic crystals. This allows for sharper or broader absorption features.
  • Broad Absorption Rate Control: The absorption rate, from 0 to nearly 1, can be finely tuned by adjusting parameters of the GNC, specifically its filling factor (V), refractive index (nh), and thickness (ds). This offers a high degree of control over the device's absorption performance.
  • Defect Layers for Resonance Tuning: Introducing defect layers within the structure creates independent resonant cavities. These cavities allow for tuning the resonance position of the absorption peaks without disrupting the underlying topological interface coupling.
  • Angle-Insensitive Absorption: The proposed absorber exhibits good absorption characteristics that are relatively insensitive to the incident angle, particularly for TE polarization.
  • Graphene Fermi Energy as a Switch: The Fermi energy of graphene acts as a "switch." Below a certain threshold (around 0.4 eV), strong absorption occurs; above it, the absorption rapidly diminishes, enabling optical switching functionalities.

Key Results

  • Perfect Absorption Achieved: The proposed HTA structure demonstrates absorption peaks exceeding 0.99, achieving near-perfect absorption.
  • Quality Factor Enhancement: The quality factor of absorption peaks can be significantly increased by increasing the number of periods (N) in the photonic crystals, reaching values up to ~2000 for triple TIS coupling.
  • Continuous Absorption Rate Control: The absorption rate can be continuously adjusted from 0 to 1 by tuning the GNC parameters (V, nh, ds).
  • Angle-Dependent Behavior: While generally angle-insensitive, TM polarization shows a noticeable blueshift in absorption peaks with increasing incident angle, while TE polarization shows a smaller shift and narrowing of peaks. This difference can be used for polarization discrimination.
  • Optical Switching Demonstrated: Tuning the graphene Fermi energy effectively switches the absorption on and off, demonstrating potential for multi-band optical switches.

Limitations and Future Work

  • Theoretical Study: The paper presents a theoretical design and numerical validation. Experimental realization and verification are the next crucial steps.
  • Fabrication Challenges: Fabricating such multilayered structures with precise control over layer thicknesses and material properties can be challenging.
  • Material Losses: While the use of photonic crystals and GNC aims to minimize losses compared to metal-based absorbers, inherent material losses in the GNC and photonic crystal layers might still affect performance in real-world applications.
  • Future Work: The authors suggest that this work provides a new approach for designing high-resolution multifunctional sensors, optical switches, and other optoelectronic devices. Further exploration into experimental validation and integration into practical devices is implied. The tunable nature of the absorber also opens avenues for applications in multi-band optical switches.

Summary updated

BibTeX
@misc{liu2024highly,
  author = {Xiangjun Liu and Jingxu Shi and Yixuan Wang and Shiyao Sun and Xiangfu Wang},
  title = {{Highly Tunable Light Absorber Based on Topological Interface Mode Excitation of Optical Tamm State}},
  year = {2024},
  doi = {10.3390/s24175772},
}

Loading related content...

Figure