Highly conductive and stretchable nanostructured ionogels for 3D printing capacitive sensors with superior performance

Xiangnan He, Biao Zhang, Qingjiang Liu, Hao Chen, Jianxiang Cheng, Bingcong Jian, Hanlin Yin, Honggeng Li, Ke Duan, Jianwei Zhang, Qi GeNature Communications 2024 · DOI

Abstract

Ionogels are promising material candidates for ionotronics due to their excellent ionic conductivity, stretchability, and thermal stability. However, it is challenging to develop 3D printable ionogels with both excellent electrical and mechanical properties. Here, we report a highly conductive and stretchable nanostructured (CSN) ionogel for 3D printing ionotronic sensors. We propose the photopolymerization-induced microphase separation strategy to prepare the CSN ionogels comprising continuous conducting nanochannels intertwined with cross-linked polymeric framework. The resultant CSN ionogels simultaneously achieves high ionic conductivity (over 3 S m⁻¹), high stretchability (over 1500%), low degree of hysteresis (0.4% at 50% strain), wide-temperature-range thermostability (-72 to 250 °C). Moreover, its high compatible with DLP 3D printing enables the fabrication of complex ionogel micro-architectures with high resolution (up to 5 μm), which allows us to manufacture capacitive sensors with superior sensing performances. The proposed CSN ionogel paves an efficient way to manufacture the next-generation capacitive sensors with enhanced performance.

Introduction

The field of "ionotronics"—devices that use ions rather than electrons as signal carriers—is rapidly expanding, particularly for applications in artificial skins and wearable sensors. However, current materials face significant trade-offs. Hydrogels, while conductive, suffer from dehydration. Ionic conductive elastomers (ICEs) offer stability but typically exhibit poor conductivity. Ionogels, which consist of polymer networks swollen with ionic liquids, represent a promising middle ground.

Despite their potential, ionogels are notoriously difficult to 3D print with high precision without sacrificing mechanical or electrical properties. Increasing ionic liquid content to boost conductivity often leads to macroscopic phase separation, resulting in materials that are too weak for structural applications. This research addresses these challenges by introducing a "highly conductive and stretchable nanostructured" (CSN) ionogel designed for high-resolution 3D printing.

Nanostructured Design and Fabrication

The researchers developed a photopolymerization-induced microphase separation strategy to create the CSN ionogel. The precursor solution consists of a monomer (benzyl acrylate, BA), a crosslinker (PEGDA), an ionic liquid ([EMIm][DCA]), and a photoinitiator (TPO).

Chemical components and formation of the CSN ionogel network.

The critical innovation is the addition of PEGMA (poly(ethylene glycol) methyl ether methacrylate). In standard mixtures, the polymer and ionic liquid tend to separate into large, opaque clumps during curing. PEGMA acts as a compatibilizer, forcing the mixture to separate at the nanoscale instead. This results in a "bicontinuous nanostructure"—a 3D labyrinth where continuous nanochannels of ionic liquid are intertwined with a robust, cross-linked polymer framework. This structure allows for rapid ion transport while maintaining the structural integrity required for 3D printing.

Performance and Characterization

By tuning the PEGMA content, the researchers could precisely control the material's properties. The transition from macroscopic to microscopic phase separation ensures the ionic liquid forms a percolating network for fast ion transport without compromising the polymer's mechanical strength.

Conductivity and transmittance of the ionogel as a function of PEGMA content.

As shown in the characterization data, increasing the PEGMA content significantly enhances both conductivity and optical transparency. The CSN ionogel achieved a conductivity of over 3 S/m, which is at least one order of magnitude higher than most previously reported 3D-printable ionogels. Mechanically, the material demonstrated extreme stretchability, reaching 1540% elongation at break, with a remarkably low hysteresis of 0.4% at 50% strain. Furthermore, the ionogels exhibited exceptional environmental resilience, maintaining stability from -72 °C to 250 °C and showing no weight change after a week in high humidity.

3D Printing and Sensor Applications

The CSN ionogel precursor's low viscosity and high photo-reactivity make it highly compatible with Digital Light Processing (DLP) 3D printing. The researchers achieved a horizontal resolution of 5 μm, enabling the fabrication of complex micro-architectures like Gyroids and Kelvin foams.

To demonstrate the material's utility, the team manufactured capacitive sensors using the Electric Double Layer (EDL) mechanism. By 3D printing Gradient Height Domes (GHD), they were able to linearize the sensor's response to pressure. These GHD-based sensors achieved a sensitivity of 15.1 kPa⁻¹, roughly 20 times higher than standard block designs. Practical applications were demonstrated through a 4×4 pressure sensor array on a glove capable of mapping hand-grasping pressure distributions in real-time.

Conclusion

The proposed CSN ionogel overcomes the traditional trade-off between mechanical toughness and electrical performance in ionotropic materials. By leveraging nanoscale phase separation and high-resolution 3D printing, this work provides a robust platform for the next generation of high-performance wearable sensors and soft robotics. Future research may focus on multi-material printing to integrate electrodes directly and testing long-term durability over tens of thousands of cycles.

Summary updated

Abstract

Ionogels are promising material candidates for ionotronics due to their excellent ionic conductivity, stretchability, and thermal stability. However, it is challenging to develop 3D printable ionogels with both excellent electrical and mechanical properties. Here, we report a highly conductive and stretchable nanostructured (CSN) ionogel for 3D printing ionotronic sensors. We propose the photopolymerization-induced microphase separation strategy to prepare the CSN ionogels comprising continuous conducting nanochannels intertwined with cross-linked polymeric framework. The resultant CSN ionogels simultaneously achieves high ionic conductivity (over 3 S m<sup>-1</sup>), high stretchability (over 1500%), low degree of hysteresis (0.4% at 50% strain), wide-temperature-range thermostability (-72 to 250 °C). Moreover, its high compatible with DLP 3D printing enables the fabrication of complex ionogel micro-architectures with high resolution (up to 5 μm), which allows us to manufacture capacitive sensors with superior sensing performances. The proposed CSN ionogel paves an efficient way to manufacture the next-generation capacitive sensors with enhanced performance.
BibTeX
@inproceedings{he2024highly,
  author = {Xiangnan He and Biao Zhang and Qingjiang Liu and Hao Chen and Jianxiang Cheng and Bingcong Jian and Hanlin Yin and Honggeng Li and Ke Duan and Jianwei Zhang and Qi Ge},
  title = {{Highly conductive and stretchable nanostructured ionogels for 3D printing capacitive sensors with superior performance}},
  booktitle = {Nature Communications},
  year = {2024},
  doi = {10.1038/s41467-024-50797-w},
}

Loading related content...

Figure