Highly coherent organic lasing based on etch-free metasurface

Daegwang Choi, Subin Mary Zachariah, Rishabh Kaurav, Jie Fang, Junsheng Chen, Bo W. Laursen, Amar H. Flood, Arka Majumdar, Andrea Alù, Vinod M. MenonNature Communications 2025 · DOI

Abstract

Metasurfaces supporting bound states in the continuum (BIC) can be leveraged as lasing platforms, offering ultra-compact and highly coherent light sources. Although designs using low-index polymers that do not require etching have been demonstrated and shown to possess remarkably high quality factors for free-space radiation, these have been so far limited to passive designs. Here, we report on highly coherent BIC-based lasing, emerging from etch-free metasurfaces that are directly patterned onto organic supramolecular materials consisting of small-molecule, ionic isolation lattices (SMILES). We observe highly directional lasing with a divergence angle of 0.2°, linewidth of 0.04 nm - limited by the spectral resolution of our measurement setup - and a temporal coherence of 20.4 ± 2.4 ps. The reported performance is a direct consequence of the combination of high-quality metasurface designs with the intrinsic uniformity and stability of SMILES, offering a strategy to realize active metasurfaces and organic molecular lasers, superior to alternative approaches based on solution-processable materials.

Introduction

Organic lasers, composed of carbon-based molecules, offer significant advantages including low production costs, mechanical flexibility, and broad spectral tunability. However, their development has been hindered by a fundamental "refractive index" challenge. Most organic materials possess low refractive indices (~1.5), making efficient light confinement difficult compared to inorganic semiconductors. Traditional solutions involve hybridizing the system—fabricating high-index nanostructures and coating them with organic dyes—which often introduces fabrication defects and scattering losses. This work addresses the need for a method to directly pattern active organic materials into high-performance photonic structures without compromising their light-emitting properties.

Methodology: The SMILES Platform and Etch-Free Fabrication

The researchers utilized a two-pronged approach combining a novel material platform with a simplified fabrication process.

SMILES Supramolecular Materials

The active medium consists of Small-molecule, Ionic Isolation Lattices (SMILES). In this structure, organic dye molecules (such as Rhodamine 3B) are encapsulated within "cyanostar" macrocycles. This isolation prevents aggregation quenching—a common issue where clumping dyes lose their efficiency—and provides exceptional thermal stability.

Direct Electron-Beam Lithography

By mixing SMILES with PMMA, a standard electron-beam resist, the authors created an "active resist." Unlike most organic dyes that degrade under heat, SMILES-based films can be baked at 150°C, which actually enhances their fluorescence. This thermal robustness allows for direct patterning via Electron Beam Lithography (EBL), bypassing destructive etching steps and minimizing surface roughness.

BIC Metasurface Design

The SMILES were patterned into metasurfaces designed to support symmetry-protected Bound States in the Continuum (BIC). BICs are electromagnetic states that are theoretically perfectly trapped within the structure, leading to infinite quality (Q) factors and enabling extremely efficient lasing.

Results and Discussion

The resulting organic laser achieved performance metrics among the highest reported for solution-processable systems.

Lasing Performance

The device demonstrated an ultra-narrow linewidth of 0.04 nm (103 $\mu$eV), reaching the resolution limit of the spectrometer. The emission was highly directional, with a beam divergence angle of only 0.2°. Temporal coherence was measured at 20.4 ± 2.4 ps, and the lasing threshold was found at a pulse fluence of approximately 2.08 $\mu$J/cm².

Topological Signatures

A key confirmation of the BIC mechanism was the observation of a "polarization vortex"—a characteristic donut-shaped emission pattern—above the lasing threshold. This topological signature confirms that the lasing originates from the designed BIC state. Furthermore, the lasing emission propagated over 100 $\mu$m across the metasurface, indicating strong spatial coherence.

Conclusion and Future Outlook

This "etch-free" approach to active metasurfaces eliminates the need for external host structures and minimizes fabrication imperfections. Future work may expand this platform to include "full-color" metasurface laser arrays by utilizing the vast library of dyes compatible with SMILES. Additionally, the use of e-beam resists opens the door to complex 3D photonic structures via grayscale lithography, potentially revolutionizing the integration of organic optoelectronics on-chip.

Summary updated

Abstract

Metasurfaces supporting bound states in the continuum (BIC) can be leveraged as lasing platforms, offering ultra-compact and highly coherent light sources. Although designs using low-index polymers that do not require etching have been demonstrated and shown to possess remarkably high quality factors for free-space radiation, these have been so far limited to passive designs. Here, we report on highly coherent BIC-based lasing, emerging from etch-free metasurfaces that are directly patterned onto organic supramolecular materials consisting of small-molecule, ionic isolation lattices (SMILES). We observe highly directional lasing with a divergence angle of 0.2°, linewidth of 0.04 nm - limited by the spectral resolution of our measurement setup - and a temporal coherence of 20.4 ± 2.4 ps. The reported performance is a direct consequence of the combination of high-quality metasurface designs with the intrinsic uniformity and stability of SMILES, offering a strategy to realize active metasurfaces and organic molecular lasers, superior to alternative approaches based on solution-processable materials.
BibTeX
@inproceedings{choi2025highly,
  author = {Daegwang Choi and Subin Mary Zachariah and Rishabh Kaurav and Jie Fang and Junsheng Chen and Bo W. Laursen and Amar H. Flood and Arka Majumdar and Andrea Alù and Vinod M. Menon},
  title = {{Highly coherent organic lasing based on etch-free metasurface}},
  booktitle = {Nature Communications},
  year = {2025},
  doi = {10.1038/s41467-025-67628-1},
}
Figure