Highly Absorbing Lead-Free Semiconductor Cu2AgBiI6 for Photovoltaic Applications from the Quaternary CuI–AgI–BiI3 Phase Space

Harry C. Sansom, Giulia Longo, Adam D. Wright, Leonardo R. V. Buizza, Suhas Mahesh, Bernard Wenger, Marco Zanella, Mojtaba Abdi‐Jalebi, Michael J. Pitcher, Matthew S. Dyer, Troy D. Manning, Richard H. Friend, Laura M. Herz, Henry J. Snaith, John B. Claridge, Matthew J. RosseinskyJournal of the American Chemical Society 2021 · DOI

TL;DR

Researchers have discovered a new lead-free semiconductor, Cu₂AgBiI₆, that exhibits excellent light absorption properties, making it a promising candidate for next-generation solar cells. This stable, inorganic material boasts a high absorption coefficient and a band gap suitable for tandem solar cell applications, potentially overcoming the toxicity concerns associated with lead-based perovskites.

What Problem Does This Paper Address?

The field of perovskite solar cells has seen remarkable progress, with lead halide perovskites achieving impressive efficiencies. However, the presence of lead raises significant environmental and health concerns, driving the search for stable, lead-free alternatives. While some lead-free compounds exist, they often suffer from limitations like unsuitable band gaps for tandem cells, poor stability, or insufficient light absorption. This paper tackles the challenge of finding a lead-free material that combines high absorption, a tunable band gap, and good stability, specifically targeting its use in tandem solar cells.

Methods

The researchers employed a multi-pronged approach to characterize Cu₂AgBiI₆:

  • Synthesis: They synthesized the material as powders, crystals, and solution-processed thin films.
  • Structural Analysis: Single-crystal X-ray diffraction (SCXRD) was used to solve the crystal structure of Cu₂AgBiI₆, revealing its unique quaternary composition and arrangement of ions. Pawley fits to powder X-ray diffraction (PXRD) data were also performed.
  • Optical Characterization: Fourier transform infrared (FTIR) spectroscopy and photothermal deflection spectroscopy (PDS) were combined to measure the absorption coefficient across a broad spectral range. Photoluminescence (PL) spectroscopy was used to study emission properties.
  • Electronic Characterization: Density functional theory (DFT) calculations were performed to understand the electronic band structure and density of states. Transient terahertz (THz) photoconductivity measurements were used to determine charge-carrier mobilities.
  • Device Fabrication and Testing: "n-i-p" planar heterojunction solar cells were fabricated using Cu₂AgBiI₆ as the absorber layer to assess its photovoltaic performance.
  • Stability Testing: The material's stability was evaluated under simulated solar irradiation and ambient conditions.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Discovery of a Novel Quaternary Phase: The paper reports the first quaternary compound, Cu₂AgBiI₆, within the CuI-AgI-BiI₃ phase space. This expands the chemical diversity available for lead-free solar absorbers.
  • High Absorption Coefficient: Cu₂AgBiI₆ exhibits an exceptionally high absorption coefficient (1.0 × 10⁵ cm⁻¹) near its absorption onset, significantly exceeding that of lead halide perovskites like MAPbI₃. This is crucial for efficient light harvesting in thin-film devices.
  • Tunable Band Gap for Tandem Cells: The material possesses a band gap of 2.06(1) eV, which is well-suited for use as the top cell in a silicon tandem solar cell configuration. The PV band gap can be further tuned to lower energies (down to 1.7 eV) by adjusting film thickness.
  • Stable Lead-Free Alternative: Unlike some previously reported lead-free materials, Cu₂AgBiI₆ demonstrates remarkable stability under ambient conditions and simulated solar irradiation, addressing a key challenge in perovskite technology.
  • Role of Cu⁺ in Structure and Properties: DFT calculations reveal that Cu⁺ ions play an active role in the electronic structure, contributing to the valence band and influencing optical transitions, suggesting that this material is more than just a simple substitution for lead.
  • Promising Charge Transport Properties: The material shows a substantial charge-carrier mobility (1.7 cm² V⁻¹ s⁻¹) and a long photoluminescence lifetime (33 ns), indicating efficient charge generation and transport.

Key Results

  • Crystal Structure: Cu₂AgBiI₆ was solved and found to have a structure based on a 2D edge-sharing octahedral network with disordered Ag⁺/Bi³⁺ in octahedral sites and Cu⁺ in tetrahedral sites.
  • Optical Properties: A direct band gap of 2.06(1) eV and an exciton binding energy of 25 meV were determined. The absorption coefficient reached 1.0 × 10⁵ cm⁻¹ near the band edge.
  • Electronic Properties: Charge-carrier mobility was measured at 1.7(5) cm² V⁻¹ s⁻¹, and the photoluminescence lifetime was found to be 33 ns.
  • Photovoltaic Performance: Single-junction solar cells fabricated with Cu₂AgBiI₆ achieved a power conversion efficiency (PCE) of 0.43%, with a short-circuit current density (Jsc) of 1.54 mA/cm², an open-circuit voltage (Voc) of 0.47 V, and a fill factor (FF) of 59.6%.
  • Stability: Cu₂AgBiI₆ powders showed no signs of decomposition after 1 week of exposure to a simulated solar spectrum.

Limitations and Future Work

  • Device Performance: The reported PCE of 0.43% for the single-junction device is modest. The authors acknowledge that significant optimization of device architecture, charge extraction layers, and passivation strategies is required to unlock the material's full potential.
  • Tandem Cell Modeling: While the paper models Cu₂AgBiI₆ as a top cell in a silicon tandem device, experimental realization of such a tandem cell is future work.
  • Defect Passivation: The authors suggest that further improvements in charge-carrier diffusion lengths are possible through a better understanding and mitigation of defects, which currently limit the material's performance.
  • Compositional Tuning: The quaternary nature of Cu₂AgBiI₆ offers opportunities for compositional tuning and chemical substitution to further enhance its properties, which is a promising avenue for future research.

Summary updated

Abstract

Since the emergence of lead halide perovskites for photovoltaic research, there has been mounting effort in the search for alternative compounds with improved or complementary physical, chemical, or optoelectronic properties. Here, we report the discovery of Cu<sub>2</sub>AgBiI<sub>6</sub>: a stable, inorganic, lead-free wide-band-gap semiconductor, well suited for use in lead-free tandem photovoltaics. We measure a very high absorption coefficient of 1.0 × 10<sup>5</sup> cm<sup>-1</sup> near the absorption onset, several times that of CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub>. Solution-processed Cu<sub>2</sub>AgBiI<sub>6</sub> thin films show a direct band gap of 2.06(1) eV, an exciton binding energy of 25 meV, a substantial charge-carrier mobility (1.7 cm<sup>2</sup> V<sup>-1</sup> s<sup>-1</sup>), a long photoluminescence lifetime (33 ns), and a relatively small Stokes shift between absorption and emission. Crucially, we solve the structure of the first quaternary compound in the phase space among CuI, AgI and BiI<sub>3</sub>. The structure includes both tetrahedral and octahedral species which are open to compositional tuning and chemical substitution to further enhance properties. Since the proposed double-perovskite Cs<sub>2</sub>AgBiI<sub>6</sub> thin films have not been synthesized to date, Cu<sub>2</sub>AgBiI<sub>6</sub> is a valuable example of a stable Ag<sup>+</sup>/Bi<sup>3+</sup> octahedral motif in a close-packed iodide sublattice that is accessed via the enhanced chemical diversity of the quaternary phase space.
BibTeX
@article{sansom2021highly,
  author = {Harry C. Sansom and Giulia Longo and Adam D. Wright and Leonardo R. V. Buizza and Suhas Mahesh and Bernard Wenger and Marco Zanella and Mojtaba Abdi‐Jalebi and Michael J. Pitcher and Matthew S. Dyer and Troy D. Manning and Richard H. Friend and Laura M. Herz and Henry J. Snaith and John B. Claridge and Matthew J. Rosseinsky},
  title = {{Highly Absorbing Lead-Free Semiconductor Cu<sub>2</sub>AgBiI<sub>6</sub> for Photovoltaic Applications from the Quaternary CuI–AgI–BiI<sub>3</sub> Phase Space}},
  journal = {Journal of the American Chemical Society},
  year = {2021},
  doi = {10.1021/jacs.1c00495},
}
Figure