High Temperature Oxidation Resistance and Electrical Properties of CrN/Cr Films Prepared by RF Magnetron Technology

Jiaxin Zhang, Meijie Zhang, Guang-Rui Gu, Baojia WuInternational Journal of Materials Mechanics and Manufacturing 2019 · DOI

Abstract

In this work, CrN films were deposited on Si substrates with a Cr buffer layer (CrN/Cr films) by RF magnetron sputtering. The structure, surface morphology, chemical composition, high temperature oxidation resistance and resistivity were studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) and four-probe resist tester, respectively. The lattice constant of the CrN/Cr films with a (111) preferred orientation was estimated to be about 4.1336 . After high temperature heat treatment, the surface morphology of CrN/Cr films changed obviously, and the electrical properties of CrN/Cr films were improved. Our results can provide an important reference in the high temperature oxidation resistance research for CrN films.

Introduction

Chromium Nitride (CrN) is a premier material for industrial coatings, prized for its exceptional hardness and resistance to wear and corrosion. It is the standard choice for protecting cutting tools, engine components, and molds. However, modern manufacturing processes, such as high-speed dry machining, generate intense heat that can degrade standard coatings. While the mechanical strength of CrN is well-documented, there is a critical need to understand its high-temperature oxidation resistance and electrical properties, particularly when integrated with a metal buffer layer to enhance performance.

Experimental Methods

Researchers utilized RF Magnetron Sputtering to deposit CrN films onto silicon substrates, specifically incorporating a thin Chromium (Cr) buffer layer. To evaluate thermal stability, the films were subjected to air annealing at 800°C for one hour. The material's evolution was tracked using a comprehensive suite of characterization techniques:

  • XRD for crystal structure and lattice constant determination.
  • SEM for surface and cross-sectional morphology visualization.
  • XPS and EDX for chemical composition and valence state mapping.
  • Four-Probe Tester for electrical resistivity measurements.

Structural and Chemical Evolution

The Cr buffer layer serves as a vital structural template, promoting a (111) preferred orientation in the CrN layer with a calculated lattice constant of 4.1336 Å. However, high-temperature exposure triggers a significant phase transformation.

XRD patterns showing phase transitions from CrN to oxides and $Cr_2N$ after annealing.

As shown in the XRD data, the cubic CrN phase decomposes upon annealing at 800°C. Nitrogen escapes the film, while oxygen diffuses in, reacting with Chromium to form a complex mixture of oxides ($Cr_2O_3$, $CrO_3$, and $CrO_2$) and $Cr_2N$. XPS analysis confirmed that after annealing, the surface is dominated by $Cr_2N$ (68.42% area) and these various oxides.

Surface Morphology and Thermal Stability

The initial growth of the CrN/Cr films exhibits a distinct "pyramidal tetrahedron" structure. While this indicates high crystallinity and large grain sizes, it presents a challenge for oxidation resistance. The sharp outlines of these tetrahedrons increase the effective surface area exposed to the atmosphere, which the authors noted actually accelerates the oxidation process at high temperatures.

SEM images of CrN/Cr films before (a, b) and after (e, f) 800°C annealing.

SEM imaging reveals that 800°C heat leads to "surface failure," completely destroying the initial pyramid structure and severely damaging the columnar growth of the film, as seen in the cross-sectional views.

Electrical Properties and Outlook

Despite the structural degradation, the Cr buffer layer provides a significant advantage in electrical performance. The inclusion of the buffer layer decreased the film's resistivity by one to two orders of magnitude compared to pure CrN. Furthermore, resistivity was found to be highly sensitive to sputtering power; increasing power from 70W to 100W optimized crystal quality and minimized resistivity.

While this study provides a clear "stress test" at 800°C, future research could explore the progression of oxidation at intermediate temperatures (400°C–600°C). Additionally, "doping" the CrN/Cr structure with elements like Aluminum or Silicon may offer a path to maintaining these improved electrical properties while slowing the structural breakdown at extreme temperatures.

Summary updated

Abstract

In this work, CrN films were deposited on Si substrates with a Cr buffer layer (CrN/Cr films) by RF magnetron sputtering. The structure, surface morphology, chemical composition, high temperature oxidation resistance and resistivity were studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) and four-probe resist tester, respectively. The lattice constant of the CrN/Cr films with a (111) preferred orientation was estimated to be about 4.1336 . After high temperature heat treatment, the surface morphology of CrN/Cr films changed obviously, and the electrical properties of CrN/Cr films were improved. Our results can provide an important reference in the high temperature oxidation resistance research for CrN films.
BibTeX
@article{zhang2019high,
  author = {Jiaxin Zhang and Meijie Zhang and Guang-Rui Gu and Baojia Wu},
  title = {{High Temperature Oxidation Resistance and Electrical Properties of CrN/Cr Films Prepared by RF Magnetron Technology}},
  journal = {International Journal of Materials Mechanics and Manufacturing},
  year = {2019},
  doi = {10.18178/ijmmm.2019.7.2.435},
}
Figure