High-Temperature Measurement of a Fiber Probe Sensor Based on the Michelson Interferometer

Jiahao Guo, Siping Lian, Ying Zhang, Yufeng Zhang, Dezhi Liang, Yongqin Yu, Ruohang Chen, Chenlin Du, Shuangchen Ruan2022 · DOI

TL;DR

Researchers have developed a novel, simple, and cost-effective fiber optic sensor capable of accurately measuring temperatures up to 900°C. This Michelson interferometer-based sensor utilizes a tapered single-mode fiber and a gold film coating for enhanced reflectivity, demonstrating excellent stability and repeatability for high-temperature industrial applications.

What Problem Does This Paper Address?

Accurate and reliable temperature monitoring is crucial in many industrial processes, particularly those involving high temperatures (above 500°C), such as metallurgy, power generation, and chemical manufacturing. Traditional thermocouple sensors can pose security risks in these environments. While existing fiber optic temperature sensors like Fiber Bragg Gratings (FBGs) and Long Period Fiber Gratings (LPFGs) offer advantages, they often rely on specialized, expensive fibers (like sapphire) or complex fabrication techniques (like laser lithography), increasing cost and complexity. This paper addresses the need for a robust, high-temperature fiber optic sensor that is simple to fabricate, cost-effective, and maintains high sensitivity and stability.

Methods

The core of the sensor is a single-mode fiber (SMF) with a tapered section created using a conventional fiber splicing machine. This tapering excites higher-order modes, which, along with the fundamental mode, propagate to the fiber's end face. The reflection from this end face, coupled back into the fiber core at the taper, creates interference patterns characteristic of a Michelson interferometer (MI).

To enhance the reflectivity of the fiber end face, which is naturally low (around 4%), a thin gold film was deposited using a vacuum evaporation coating method. This significantly improved the reflection intensity by approximately 16 dB.

The fabrication process involved carefully controlling the splicing machine parameters (discharge intensity, time, and motor propulsion distance) to create the optimal taper. The distance (L) between the taper and the fiber end face was also precisely controlled to influence the interference spectrum.

Experimental characterization involved placing the sensor in a temperature furnace and monitoring spectral shifts using a superluminescent light-emitting diode (SLED) and an optical spectrum analyzer (OSA). The temperature response, stability, and repeatability were evaluated across various temperature ranges.

Datasets

Not discussed in the paper. The experiments were conducted using a controlled laboratory setup with a temperature furnace and optical measurement equipment.

Key Insights and Ideas

  • Simplicity is Key: The sensor's design, relying on a simple taper in a standard SMF without requiring additional fiber splicing, significantly reduces fabrication complexity and cost compared to other high-temperature fiber sensors.
  • Gold Coating Boosts Performance: Depositing a gold film on the fiber end face dramatically increases reflectivity, leading to stronger interference signals without negatively impacting temperature sensitivity. This is a crucial practical enhancement.
  • High-Temperature Stability: The sensor demonstrated remarkable stability and repeatability even after multiple heating and cooling cycles up to 900°C, indicating its robustness for demanding environments.
  • Non-linear Response at High Temperatures: While the sensor exhibits linear behavior in specific temperature ranges, the overall response across the entire 100-900°C range is non-linear, necessitating piecewise linear fitting for accurate sensitivity calculations.
  • Wavelength Dependence of Sensitivity: The study observed that dips at longer wavelengths within the interference spectrum showed higher temperature sensitivity, suggesting potential for wavelength-selective sensing.

Key Results

  • Temperature Range: The sensor successfully operated and provided measurements in the range of 100°C to 900°C.
  • Temperature Sensitivity:
    • In the low-temperature region (100°C to 450°C), the sensitivity was measured to be 80 pm/°C.
  • In the high-temperature region (450°C to 900°C), the sensitivity increased to 109 pm/°C.
  • Reflectivity Improvement: The gold film coating increased the reflection intensity by 16 dB.
  • Stability and Repeatability: The sensor showed good stability and repeatability, with dip drift at 900°C not exceeding ±0.3 nm over extended periods.
  • Linearity: High linearity was achieved in the tested temperature ranges, with R² values of 0.997 and 0.998 for the low and high-temperature regions, respectively.

Limitations and Future Work

  • Non-linear Response: The non-linear temperature response across the entire measurement range, while manageable with piecewise fitting, could be a limitation for applications requiring a single, simple linear model.
  • Fiber Degradation at Extreme Temperatures: While the sensor showed good stability up to 900°C, initial tests indicated spectral distortion at 1000°C, suggesting 900°C as a practical upper limit for reliable operation. Further investigation into the exact failure mechanism at higher temperatures could be beneficial.
  • Future Work: The authors suggest that this sensor is particularly suitable for industrial applications due to its simple manufacturing, low cost, and high sensitivity. Future work could explore optimizing the taper design for even higher sensitivity or extending the operational temperature range further. Investigating the impact of different coating materials or exploring multiplexing capabilities for measuring multiple parameters could also be promising avenues.

Summary updated

BibTeX
@misc{guo2022high,
  author = {Jiahao Guo and Siping Lian and Ying Zhang and Yufeng Zhang and Dezhi Liang and Yongqin Yu and Ruohang Chen and Chenlin Du and Shuangchen Ruan},
  title = {{High-Temperature Measurement of a Fiber Probe Sensor Based on the Michelson Interferometer}},
  year = {2022},
  doi = {10.3390/s22010289},
}

Loading related content...

Figure