High Sensitivity Temperature Sensing of Long-Period Fiber Grating for the Ocean

Jiayi Qu, Hongxia Zhang, Xinyu Shi, Chuanxi Li, Dagong Jia, Tiegen Liu, Rongxin SuSensors 2023 · DOI

TL;DR

Researchers have developed a highly sensitive fiber optic temperature sensor for ocean monitoring by combining a specially doped long-period fiber grating (LPFG) with a titanium dioxide (TiO2) coating and a unique UV-curable adhesive. This novel sensor achieves an unprecedented resolution of 0.00026 °C, significantly outperforming conventional sensors and meeting the stringent requirements for accurate ocean temperature measurements.

What Problem Does This Paper Address?

Accurate and real-time monitoring of ocean temperature is crucial for understanding climate change, marine ecosystems, and sustainable development. However, existing sensors face challenges in achieving the required miniaturization, high accuracy (±0.001 °C), and broad temperature range (5-30 °C) for deep-sea and dynamic ocean environments. Traditional electrical sensors are often expensive and difficult to deploy in large networks. Fiber optic sensors, while promising, have historically struggled with achieving sufficient temperature sensitivity and overcoming cross-sensitivity issues with other environmental factors like salinity and biofouling. This paper aims to bridge this gap by developing a robust and highly sensitive fiber optic temperature sensor specifically tailored for the demanding conditions of the ocean.

Methods

The core of the sensor is a long-period fiber grating (LPFG) fabricated from a Ge and B co-doped photosensitive fiber. This doping enhances the fiber's sensitivity to changes. The LPFG operates on the principle of mode coupling, where light energy transfers between the core mode and cladding modes.

To boost sensitivity, a thin 10 nm titanium dioxide (TiO2) film was sputtered onto the LPFG surface. TiO2 was chosen for its high refractive index, which enhances the interaction between the light and the surrounding environment. This coating, combined with the LPFG's structure, creates a mode conversion phenomenon that is highly sensitive to changes in the surrounding refractive index (SRI).

Crucially, the sensor's temperature sensitivity was further amplified by packaging the coated LPFG with a PC452 UV-curable adhesive. This adhesive possesses a high thermoluminescence coefficient, meaning its refractive index changes significantly with temperature. This packaging strategy effectively converts the LPFG's inherent refractive index sensitivity into a high temperature sensitivity, while also mitigating cross-sensitivity to SRI.

The researchers also investigated the impact of seawater immersion and protein adsorption on the sensor's performance, exploring surface modifications with zwitterionic polymers to improve anti-fouling properties and maintain sensor stability in marine environments.

Datasets

Not discussed in the paper. The study relies on experimental measurements and simulations rather than pre-existing datasets.

Key Insights and Ideas

  • Synergistic Enhancement: The combination of a Ge and B co-doped LPFG, a high-refractive index TiO2 coating, and a thermoluminescent adhesive creates a powerful synergy for achieving ultra-high temperature sensitivity.
  • Mode Conversion as a Sensitivity Amplifier: The paper leverages the mode conversion phenomenon in LPFGs, particularly when the surrounding refractive index approaches the effective refractive index of the cladding modes, to dramatically increase SRI sensitivity.
  • Packaging as a Temperature Transducer: The choice of packaging material with a high thermoluminescence coefficient is key to converting the SRI sensitivity into temperature sensitivity, effectively decoupling temperature from SRI.
  • Addressing Marine Environment Challenges: The study proactively addresses practical marine application issues by investigating the effects of seawater and protein fouling, and proposing solutions like anti-fouling polymer coatings.
  • Ge and B Doping Advantage: The Ge and B co-doped LPFG exhibits a blue shift in its resonant peak with increasing temperature, contrasting with the red shift of ordinary LPFGs, and offers significantly higher sensitivity.

Key Results

  • The developed sensor achieved a temperature sensitivity of 3.8 nm/°C in the range of 5–30 °C.
  • The sensor boasts a resolution of approximately 0.00026 °C, which is over 20 times higher than ordinary temperature sensors.
  • The TiO2 coating significantly improved refractive index sensitivity, with the Ge and B co-doped LPFG coated with 10 nm TiO2 showing a sensitivity of -3975.56 nm/RIU.
  • The PC452 adhesive provided the highest temperature sensitivity among the tested adhesives, reaching 3.8 nm/°C.
  • The sensor's performance was validated against simulation results, showing good agreement.
  • Protein adsorption was found to significantly degrade temperature sensitivity (by ~33%), highlighting the importance of anti-fouling strategies.

Limitations and Future Work

  • Cross-sensitivity: While the packaging strategy aims to mitigate cross-sensitivity between temperature and SRI, the paper acknowledges that the effects of seawater salinity and protein adhesion on performance need further study.
  • Temperature Range: The experimental measurement range for packaged sensors was limited by the transmission peak depth falling below 5 dB, suggesting that the full simulated range might not be experimentally accessible without further optimization.
  • Long-term Stability: While short-term seawater immersion showed minimal impact on refractive index, the long-term stability and performance of the sensor in the actual marine environment require more extensive investigation.
  • Further Sensitivity Enhancement: Despite achieving high sensitivity, the paper notes that further enhancement is still needed to meet the most stringent requirements for ocean temperature sensing (±0.001 °C).
  • Anti-fouling Polymer Optimization: While zwitterionic polymers showed promise in reducing protein adsorption and improving stability, further research could explore optimizing the polymer structure and application for maximum anti-fouling and minimal impact on sensor performance.

Summary updated

Abstract

In this study, a new temperature sensor with high sensitivity was achieved by four-layer Ge and B co-doped long-period fiber grating (LPFG) based on the mode coupling principle. By analyzing the mode conversion, the influence of the surrounding refractive index (SRI), the thickness and the refractive index of the film on the sensitivity of the sensor is studied. When 10 nm-thick titanium dioxide (TiO<sub>2</sub>) film is coated on the surface of the bare LPFG, the refractive index sensitivity of the sensor can be initially improved. Packaging PC452 UV-curable adhesive with a high-thermoluminescence coefficient for temperature sensitization can realize high-sensitivity temperature sensing and meet the requirements of ocean temperature detection. Finally, the effects of salt and protein attachment on the sensitivity are analyzed, which provides a reference for the subsequent application. The sensitivity of 3.8 nm/°C in the range of 5-30 °C was achieved for this new sensor, and the resolution is about 0.00026 °C, which is over 20 times higher than ordinary temperature sensors. This new sensor meets the accuracy and range of general ocean temperature measurements and could be used in various marine monitoring and environmental protection applications.
BibTeX
@inproceedings{qu2023high,
  author = {Jiayi Qu and Hongxia Zhang and Xinyu Shi and Chuanxi Li and Dagong Jia and Tiegen Liu and Rongxin Su},
  title = {{High Sensitivity Temperature Sensing of Long-Period Fiber Grating for the Ocean}},
  booktitle = {Sensors},
  year = {2023},
  doi = {10.3390/s23104768},
}
Figure