High Sensitivity Refractometer Based on Reflective Smf-Small Diameter No Core Fiber Structure

Guorui Zhou, Qiang Wu, Rahul Kumar, Wai Pang Ng, Hao Liu, Longfei Niu, Nageswara Lalam, Xiaodong Yuan, Yuliya Semenova, Gerald Farrell, Jinhui Yuan, Chongxiu Yu, Jie Zeng, Gui Yun Tian, Yong Qing Fu2017 · DOI

TL;DR

Researchers have developed a novel optical fiber refractometer using a small-diameter no-core fiber (SDNCF) with a gold coating. This design achieves high sensitivity for measuring liquid refractive indices, offering a simpler and more cost-effective alternative to existing methods.

What Problem Does This Paper Address?

Accurate measurement of refractive index (RI) is crucial for various applications, including chemical analysis, biomolecule detection, and structural health monitoring. While many optical fiber sensors exist, they often suffer from complex fabrication processes, high costs, or limited sensitivity. Existing single-mode-multimode-single-mode (SMS) fiber refractometers, for instance, typically require challenging chemical etching to create the sensing region, which can introduce surface roughness and safety concerns. This paper aims to address these limitations by proposing a simpler, more sensitive, and cost-effective refractometer design.

Methods

The proposed refractometer utilizes a unique fiber structure: a standard single-mode fiber (SMF) is fusion spliced to a small-diameter no-core fiber (SDNCF), and the end face of the SDNCF is coated with a thin gold film to act as a reflector. When light enters the SDNCF, it excites multiple modes that propagate and are reflected back by the gold-coated end face. The surrounding liquid acts as the cladding for the SDNCF, and changes in its refractive index alter the effective RI of the SDNCF's cladding. This, in turn, affects the propagation of the excited modes, leading to a shift in the reflected light's spectrum.

The authors employed both theoretical simulations and experimental investigations to study the sensor's performance. Numerical simulations were used to model the optical behavior of the fiber structure and predict its sensitivity. Experiments were conducted by fabricating the proposed fiber structure and immersing it in liquids with varying refractive indices. The researchers systematically investigated the influence of SDNCF diameter and length on the sensor's sensitivity.

Datasets

Not discussed in the paper. The experiments used calibrated sugar solutions as liquid samples with known refractive indices.

Key Insights and Ideas

  • Diameter is King: The diameter of the small-diameter no-core fiber (SDNCF) has a significant impact on the sensor's refractive index sensitivity. Smaller diameters lead to much higher sensitivity.
  • Length Matters Less: Conversely, the length of the SDNCF has a limited influence on the sensor's sensitivity. This offers flexibility in fabrication and design.
  • Endpoint Advantage: The proposed sensor acts as an "endpoint" sensor, meaning the sensing region is at the end of the fiber. This is advantageous for applications where inline sensors are impractical, such as when functionalizing the sensor tip with specific compounds.
  • Gold Coating for Reflection: The gold coating on the SDNCF end face simplifies the reflective mechanism, avoiding the need for more complex mirror fabrication.

Key Results

  • High Experimental Sensitivity: The fabricated sensor with a 55 µm diameter SDNCF achieved a measured sensitivity of 327 nm/RIU (nanometers per refractive index unit) for refractive indices ranging from 1.33 to 1.38.
  • Simulation Accuracy: The simulation results closely matched the experimental findings, with a predicted sensitivity of 349.5 nm/RIU for the same configuration.
  • Diameter Impact Demonstrated: Simulations showed that reducing the SDNCF diameter to 35 µm could theoretically yield a sensitivity as high as 486 nm/RIU. In contrast, a larger 125 µm diameter SDNCF resulted in a significantly lower sensitivity (around 117-141 nm/RIU).
  • Improved Performance: The achieved sensitivity of 327 nm/RIU is approximately 2.4 times higher than previously reported SCSMF sensors and is among the highest reported for similar fiber refractometers.

Limitations and Future Work

  • Further Sensitivity Improvement: The authors suggest that using even smaller diameter commercial no-core fibers could further enhance the sensor's sensitivity.
  • Functionalization for Diverse Applications: The proposed structure, with appropriate coatings, has potential for a wide range of applications. Examples include:
  • Ammonia Sensing: Coating with Pt-decorated graphene oxide for highly sensitive ammonia detection.
  • Magnetic Field Sensing: Utilizing magnetic fluids whose RI changes with magnetic fields.
  • Multiparameter Sensing: By cascading multiple SDNCF sections with different functional layers, it may be possible to achieve simultaneous detection of multiple parameters.
  • Material Considerations: While the gold coating is effective, exploring other reflective materials or coatings could be a future avenue.

Summary updated

BibTeX
@misc{zhou2017high,
  author = {Guorui Zhou and Qiang Wu and Rahul Kumar and Wai Pang Ng and Hao Liu and Longfei Niu and Nageswara Lalam and Xiaodong Yuan and Yuliya Semenova and Gerald Farrell and Jinhui Yuan and Chongxiu Yu and Jie Zeng and Gui Yun Tian and Yong Qing Fu},
  title = {{High Sensitivity Refractometer Based on Reflective Smf-Small Diameter No Core Fiber Structure}},
  year = {2017},
  doi = {10.3390/s17061415},
}

Loading related content...

Figure