High-Resolution Programmable Scattering for Wireless Coverage Enhancement: An Indoor Field Trial Campaign

James Rains, Jalil Ur Rehman Kazim, Anvar Tukmanov, Tie Jun Cui, Lei Zhang, Qammer H. Abbasi, Muhammad Ali ImranarXiv 2021 · arXiv

Abstract

As wireless networks transition to higher frequency bands, signal blockages in indoor environments create significant coverage gaps. This paper presents the development and experimental validation of a 3-bit Reconfigurable Intelligent Surface (RIS) designed to mitigate these "blind spots." Featuring a 2,304-unit cell array with high phase resolution, the system demonstrates substantial signal enhancement in complex non-line-of-sight (NLoS) scenarios. Field trials reveal that the 3-bit architecture provides a 2.65 dB power improvement over traditional 1-bit designs and can boost received power by up to 40 dB in deep NLoS conditions.

Introduction

The deployment of 5G sub-6 GHz and mmWave technologies faces a fundamental physical hurdle: signal propagation is highly susceptible to blockages from walls, corners, and structural elements. Reconfigurable Intelligent Surfaces (RIS) have emerged as a promising solution, acting as programmable mirrors that can steer electromagnetic waves to bypass obstacles. However, most current prototypes rely on 1-bit phase resolution, which limits beamforming efficiency and creates unwanted spurious beams. This work addresses these limitations by implementing a high-resolution 3-bit RIS and testing its performance in real-world indoor environments.

Hardware Design and Architecture

The core of the system is a large-scale RIS composed of 2,304 unit cells arranged in a 48x48 grid. To ensure practical manufacturability and cost-effectiveness, the researchers utilized a "vialess" planar design.

The unit cell hardware design features a vialess planar structure with PIN diodes to achieve 3-bit phase resolution.

Each unit cell integrates PIN diodes to switch between eight distinct phase states, providing the 3-bit resolution necessary for precise wavefront control. To manage the complexity of controlling over 2,000 elements, the surface employs a column-driven architecture. By grouping cells into columns, the system simplifies the control circuitry and focuses on high-resolution horizontal (azimuth) steering, which is the primary requirement for most indoor coverage enhancement scenarios.

Experimental Methodology

The experimental campaign utilized Universal Software Radio Peripherals (USRPs) to transmit 5G-like OFDM signals across the 3.3 to 4.5 GHz frequency range. The system's performance was optimized using an "adaptive optics-inspired" greedy algorithm.

The experimental system diagram illustrates the feedback loop between the receiver, the optimization algorithm, and the RIS control link.

As shown in the system diagram, the receiver measures the signal strength and provides feedback to an optimization algorithm. This algorithm iteratively adjusts the phase configuration of the RIS columns to maximize the received power at the user's location. This closed-loop approach allows the RIS to adapt to complex environments without requiring prior knowledge of the channel geometry.

Key Results and Field Trials

The RIS was subjected to three distinct indoor scenarios: an open lobby, a corridor junction (deep NLoS), and a floor-to-floor transition.

  • Massive Coverage Gains: In the corridor junction scenario, where the transmitter and receiver were separated by a sharp corner, the RIS achieved a 40 dB improvement in received power compared to a standard metal plate.
  • The 3-Bit Advantage: Comparative tests showed that the jump from 1-bit to 3-bit resolution yielded a 2.65 dB increase in received power, validating the need for higher phase resolution in high-performance wireless links.
  • Wideband Performance: The system maintained robust performance across a 100 MHz instantaneous bandwidth, proving its suitability for high-speed 5G data channels.
  • Cross-Floor Connectivity: In the floor-to-floor trial, the RIS established a high-quality link (21.13 dB gain) in an area that was previously a total coverage blind spot.

Discussion and Future Outlook

While the prototype successfully demonstrated the power of high-resolution RIS, several challenges remain. The current implementation's power consumption (8.6 Watts) is relatively high for a supposedly "nearly passive" technology; future iterations may explore varactor diodes to improve energy efficiency. Additionally, the column-driven approach, while efficient for azimuth steering, precludes vertical beam control. Future research will focus on scaling these high-resolution surfaces while maintaining low power profiles and developing faster optimization algorithms to support mobile users in real-time.

Summary updated

BibTeX
@misc{rains2021high,
  author = {James Rains and Jalil Ur Rehman Kazim and Anvar Tukmanov and Tie Jun Cui and Lei Zhang and Qammer H. Abbasi and Muhammad Ali Imran},
  title = {{High-Resolution Programmable Scattering for Wireless Coverage Enhancement: An Indoor Field Trial Campaign}},
  year = {2021},
  eprint = {2112.11194},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2112.11194},
}
Figure