High resolution dataset for flow past arbitrary bodies

Shuvayan Brahmachary, Nils ThuereyarXiv 2023 · DOI · arXiv

TL;DR

Researchers have developed a Differentiable Physics-Assisted Neural Network (DPNN) that acts as a high-speed, coarse-grained surrogate for simulating complex fluid flows around arbitrary objects. By embedding a differentiable fluid solver directly into the neural network's training loop, the model learns to "correct" approximate physics, accurately reconstructing intricate wake dynamics and boundary layers that traditional deep learning often misses.

What Problem Does This Paper Address?

Simulating unsteady fluid flow—like the swirling wakes behind bridge piers or aircraft components—is a classic "pick two" problem: accuracy, speed, or geometric flexibility.

Traditional Computational Fluid Dynamics (CFD) is highly accurate but computationally expensive, especially when dealing with multiple bodies or complex shapes that require specialized meshes. On the other hand, pure Machine Learning (ML) models are lightning-fast but often "drift" away from physical reality over time because they don't truly understand the underlying equations of motion.

The authors tackle a particularly difficult scenario: flow past multiple cylinders of arbitrary shapes arranged in various configurations. These setups produce a wide spectrum of behaviors, from stable periodic shedding to chaotic "flip-flopping" wakes. The challenge is to create a model that is fast enough for design iteration but robust enough to preserve local boundary layer details and global wake physics over long time horizons.

Methods

The authors introduce a hybrid framework called a Differentiable Physics-Assisted Neural Network (DPNN). The architecture consists of two main components:

  1. The Source Solver (PhiFlow): A fast, differentiable, but low-order fluid solver. It uses a coarse grid and a simplified "stair-step" representation of boundaries, which makes it computationally cheap but physically inaccurate (it's too "dissipative," meaning it smooths out details too much).
  2. The Neural Network (NN): A ResNet-based architecture that acts as a forcing function.

During training, the "Source" solver predicts the next state of the flow, and the NN immediately applies a correction to fix the errors introduced by the coarse simulation. Because the solver is differentiable, the network receives feedback through the physics of the flow itself—a strategy known as "solver-in-the-loop." This is compared against a Reference Solver (FoamExtend), which provides high-fidelity ground truth data.

Datasets

The study utilizes a newly generated dataset of 100 experiments involving incompressible flow at a Reynolds number of approximately 100.

  • Configurations: Three cylinders placed in a staggered equilateral triangle position.
  • Arbitrariness: To ensure the model doesn't just memorize circles, the upstream cylinder is a composite "blob" (rectangles plus semi-circles), and the downstream bodies vary between rectangles and circles.
  • Diversity: 100 unique geometric configurations, each with a different spacing ratio ($L/D$).
  • Scale: The ground truth is high-resolution ($768 \times 512$), while the DPNN operates on a downsampled ($96 \times 64$) grid for efficiency.

Key Insights and Ideas

  • The "Forcing Function" Role: The NN doesn't just predict pixels; it learns to counter the numerical dissipation of the coarse solver. It essentially "sharpens" the physics that the cheap solver gets wrong.
  • Boundary Layer Preservation: Coarse solvers typically struggle with the "no-slip" condition at a body's surface, leading to unnaturally thick boundary layers. The DPNN successfully learns to reconstruct the steep velocity gradients near the arbitrary shapes, which is critical for accurate drag and lift predictions.
  • Wake Agnosticism: The model is remarkably robust across different "wake categories." Whether the flow is in an "anti-phase" regime (vortices rotating in opposite directions) or "in-phase," the DPNN identifies and maintains the correct physical symmetry.
  • Strouhal Number Consistency: One of the most impressive "aha" moments is that the model's predictions align with the Strouhal number (a dimensionless measure of oscillation frequency) found in classical literature, proving it has captured the fundamental physics of vortex shedding.

Key Results

  • Superior Accuracy: The DPNN significantly outperformed standard Supervised Learning (SL) benchmarks. While SL models often saw their errors explode over long time sequences, the DPNN remained stable.
  • Generalizability (OOD): The model was tested on "Out-of-Distribution" samples—cases it never saw during training, such as symmetric equi-diameter cylinders and even a reduced two-cylinder setup. It successfully predicted the correct wake regimes (like "deflected gap" wakes) in these new scenarios.
  • Energy Conservation: Quantitative analysis showed that the DPNN maintained the correct levels of enstrophy (rotational energy) and kinetic energy, whereas the standalone coarse solver lost significant energy due to numerical errors.

Limitations and Future Work

The primary limitation noted is the handling of chaotic wakes (specifically the "flip-flopping" regime). While the DPNN captures the erratic switching of gap flows better than other methods, its accuracy diminishes over very long temporal horizons in these chaotic states.

Future work suggests applying this framework to much higher Reynolds numbers (turbulent flows) and 3D geometries, where the computational savings of a coarse-grained DPNN surrogate would be even more transformative for engineering and design.

Reference: Brahmacharya, S., & Thuerey, N. (2023). Unsteady Cylinder Wakes from Arbitrary Bodies with Differentiable Physics-Assisted Neural Network. arXiv:2308.04296v2.

Summary updated

Abstract

This dataset comprises the high-resolution (768 x 512) flowfields for incompressible flow past arbitrarily shaped bodies at low Reynolds number (100, approx.) obtained using FoamExtend based immersed boundary method. The dataset is divided into 3 parts viz. (a) Training dataset containing 50 experiments having 100 frames each (27.5 GB, approx), (b) testing datset containing 50 additional experiments having 300 frames each (82.5 GB, approx), and (c) total dataset (i.e., 100 experiemnts) having 1500 frames each (825 GB, approx). Part (a) forms the training dataset used to train the differentiable physics-assisted neural network (DPNN) whereas part (b) forms the testing dataset for the trained DPNN based model. Finally, part (c) serves as additional dataset for further validation and benchmarking. The dataset only includes the stastically stable velocity flowfields (i.e., time 150s onwards spaced at 0.1s) along with shape mask. The 100 experiments comprises of 100 different geometric configurations (i.e, arbitrary bodies placed in an equilateral triangle position), each at a unique spacing ratio. In addition, the coordinates of the underlying bodies are also provided separately.
BibTeX
@misc{brahmachary2023high,
  author = {Shuvayan Brahmachary and Nils Thuerey},
  title = {{High resolution dataset for flow past arbitrary bodies}},
  year = {2023},
  eprint = {2308.04296},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2308.04296},
}
Figure