High-Q mid-infrared chalcogenide glass resonators

Hongtao Lin, Lan Li, Yi Zou, Spencer Novak, Kathleen Richardson, Juejun HuarXiv 2016 · DOI · arXiv

Abstract: In this letter, we fabricated and characterized chalcogenide glass resonators monolithically integrated on mid-infrared transparent $CaF_2$ substrates. The devices feature an intrinsic Q-factor of $4 \times 10^5$ at 5.2 $\mu$m wavelength, which represents the highest Q-factor reported in planar mid-infrared resonators. It is found that moisture can significantly impact the device performance when the device was exposed to an ambient environment, although the high-Q characteristics can be restored after undergoing an annealing treatment. Using these devices, we further demonstrated on-chip cavity-enhanced spectroscopy to quantify mid-IR absorption of ethanol solutions around 5.2 $\mu$m wavelength.

Introduction

The mid-infrared (mid-IR) "fingerprint" region (3–12 $\mu$m) is critical for chemical sensing and spectroscopy because most molecules exhibit strong characteristic absorption bands here. However, traditional integrated photonics—largely based on silicon-on-insulator (SOI) technology—stumbles in this regime. The standard cladding material, silicon dioxide ($SiO_2$), becomes highly opaque at wavelengths longer than 4 $\mu$m. To overcome this, researchers have developed high-performance mid-IR micro-disk resonators by monolithically integrating chalcogenide glass onto calcium fluoride ($CaF_2$) substrates.

Methods and Design

The authors utilized a glass-on-$CaF_2$ platform, specifically choosing $Ge_{23}Sb_7S_{70}$ for its superior thermal and chemical stability compared to traditional arsenic-based glasses. The substrate, $CaF_2$, is transparent up to approximately 10 $\mu$m.

The devices were fabricated using a negative-resist-based lift-off process, with the chalcogenide glass (ChG) film deposited via single-source thermal evaporation at low temperatures. This monolithic integration allows for deposition on various substrates without complex wafer bonding. To maximize coupling efficiency, a pulley coupler design was employed to link the feeding waveguide to the 100-$\mu$m-radius micro-disk resonator.

Device characterization including SEM cross-sections, mode simulations, and surface topography.

Key Results

The primary achievement of this work is the demonstration of a record-breaking intrinsic Q-factor of $4 \times 10^5$ at a 5.2 $\mu$m wavelength. This corresponds to a remarkably low propagation loss of 0.15 dB/cm and an effective optical path length of 29 cm on a compact chip. The measured group index of 2.1 aligned well with finite-element simulations.

Transmission spectra of the micro-disk resonator showing high-Q resonance dips and the Lorentzian fit used to extract the Q-factor and loss parameters.

Environmental Stability and Sensing

A significant finding was the impact of ambient moisture on device performance. Exposure to air for 168 hours increased propagation loss from 0.23 dB/cm to 3.1 dB/cm. However, this degradation was found to be reversible; annealing the chips at 120°C for 30 minutes partially restored the high-Q characteristics, indicating that the loss stems from surface-adsorbed water rather than structural damage.

The high-Q resonators were also used for cavity-enhanced sensing. By immersing the resonator in a liquid, the evanescent field interacts with the medium. The high Q-factor effectively multiplies the interaction length, allowing for sensitive detection of subtle absorption features. The team quantified ethanol concentrations in cyclohexane, finding an absorption coefficient of $(74 \pm 3.4) \text{ cm}^{-1}$, which closely matches the benchtop FTIR reference value of $78 \text{ cm}^{-1}$.

Conclusion

While the platform shows immense promise for on-chip mid-IR spectroscopy, environmental stability remains a challenge. Future implementations may require hermetic packaging or protective cladding to maintain performance in field conditions. Expanding the testing across the full transparency window of the $CaF_2$ substrate remains a key goal for future research.

Summary updated

Abstract

In this letter, we fabricated and characterized chalcogenide glass resonators monolithically integrated on mid-infrared transparent CaF2 substrates. The devices feature an intrinsic Q-factor of 4E5 at 5.2 micron wavelength, which represents the highest Q-factor reported in planar mid-infrared resonators. It is found that moisture can significantly impact the device performance when the device was exposed to an ambient environment, although the high-Q characteristics can be restored after undergoing an annealing treatment. Using these devices, we further demonstrated on-chip cavity-enhanced spectroscopy to quantify mid-IR absorption of ethanol solutions around 5.2 micron wavelength.
BibTeX
@misc{lin2016high,
  author = {Hongtao Lin and Lan Li and Yi Zou and Spencer Novak and Kathleen Richardson and Juejun Hu},
  title = {{High-Q mid-infrared chalcogenide glass resonators}},
  year = {2016},
  eprint = {1612.04322},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/1612.04322},
}

Loading related content...

Figure