High-Precise Robot Arm Manipulation based on Online Iterative Learning and Forward Simulation with Positioning Error Below End-Effector Physical Minimum Displacement
Abstract
Achieving sub-millimeter precision in robotic manipulation is a significant challenge due to hardware limitations like joint angular resolution and the "sparse data problem" in learning-based models. This paper presents a framework that achieves positioning precision finer than the robot's own minimum physical step. By combining a pre-trained "average" model with online iterative learning and "mental" forward simulations, the system reaches high accuracy even with limited training data. Experimental results on a UR3 robot arm demonstrate that the framework can achieve a precision of 1.88 mm in real-world scenarios, surpassing the hardware's minimum physical displacement of 2.91 mm.
Introduction
High-precision manipulation is essential for tasks such as medical surgery, laser cutting, and aerospace assembly. However, current robotic systems face a "precision ceiling" caused by rigid error compensation methods, perception errors in absolute coordinate systems, and the discrete nature of motor steps. Learning-based methods, while flexible, often require vast amounts of data to achieve high accuracy across an entire workspace. This work introduces an Embodied Self-Supervised Learning (EMSSL) framework designed to bridge this gap by combining adaptability with ultra-precise control.
Methodology
The researchers developed a multi-layered framework based on EMSSL. Key components include:
- Relative Positioning: Instead of absolute coordinates, the system utilizes a binocular camera mounted on the end-effector. This setup calculates the relative distance to the target, which naturally reduces perception error as the arm approaches the goal.
- Online Iterative Learning: The system pre-trains an "average" inverse model and then replicates it for specific targets, performing rapid online learning to adapt to the local coordinate space.
- Forward Simulation (Mental Simulation): Inspired by human cognition, the robot performs "mental rehearsals" using a forward model to predict movement outcomes without physical execution. This process avoids local minima and accelerates convergence.
Key Insights
A critical advantage of this framework is the Proximity Advantage. By mounting the camera on the end-effector, the system exploits dynamic resolution: as the arm approaches the target, the number of pixels representing the target increases, enhancing the precision of the visual feedback.
Furthermore, the system can "beat" hardware limits. By finding the optimal combination of joint angles through iterative refinement and mental simulation, it achieves a positioning error lower than the end-effector's physical minimum displacement. This allows the robot to perform tasks with a level of detail that its hardware specifications would normally prohibit.
Results
The framework was evaluated in both simulated and real-world environments. In simulation, with a joint resolution of 0.01°, the method achieved a precision of 0.02 mm, a significant improvement over the 1.84 mm baseline. In real-world tests using a UR3 arm with joint resolution set to 1°, the system achieved an average precision of 1.88 mm, which is notably better than the robot's minimum physical displacement of 2.91 mm. Additionally, the parallel strategy increased the success rate from 71.04% to 96.50%, while reducing the worst-case error in simulation to just 0.04 mm.
Conclusion
This framework demonstrates that combining online learning with forward simulation allows robots to exceed their physical hardware constraints. By leveraging relative perception and cognitive-inspired "mental" rehearsals, the system achieves sub-millimeter precision suitable for high-stakes industrial and medical applications. Future work will focus on reducing computational overhead and adapting the system for dynamic targets.
Summary updated