Abstract
To address the industrial demand for processing highly reflective metals such as copper and gold, this research presents a fiber-coupled blue semiconductor laser source capable of 523 W continuous-wave (CW) output. Utilizing 144 individual TO-packaged blue laser diodes, the system employs custom-designed fast-axis and slow-axis collimators to achieve high beam quality. Through a combination of 2D spatial combining, polarization combining, and fiber coupling, the beams are integrated into a 200 μm/NA 0.22 fiber. Experimental results demonstrate a wall-plug efficiency of 29% at a 3 A driving current, providing a robust solution for direct material processing.
Introduction
In industrial manufacturing, traditional infrared (IR) lasers face significant challenges when processing non-ferrous metals like copper and gold due to high reflectivity at IR wavelengths. This leads to low energy efficiency and process instabilities such as spatter. Blue light (~450 nm) offers a solution, as these metals absorb blue radiation up to ten times more effectively than IR. However, scaling blue laser diodes to the multi-hundred-watt levels required for industrial use necessitates sophisticated beam combining techniques to maintain beam quality and system reliability.
Methods and System Design
The researchers at the Changchun Institute of Optics, Fine Mechanics and Physics (CIOMP) developed a modular high-power source using a multi-stage approach:
1. Robust Packaging and Collimation
To ensure long-term reliability, the system utilizes TO-packaged single emitters. These hermetically sealed packages protect the Gallium Nitride (GaN) chips from oxidation. Because the TO package includes a flat window, the "back working distance" is extended. The team designed specialized Fast-Axis Collimators (FAC) and Slow-Axis Collimators (SAC) to transform the divergent output into high-quality parallel beams.
2. Spatial and Polarization Combining
The system achieves high power density through two primary combining stages:
- Spatial Combining: Emitters are arranged in 2D grids. As shown in the 3D schematic, mirrors and collimators are used to align multiple beams into a dense spatial array.
- Polarization Combining: To double the power without increasing the beam parameter product (BPP), the system uses half-wave plates (HWP) and polarization beam splitters (PBS). This allows two identical beam arrays of different polarizations to be overlapped before being focused into the fiber.
Key Results
The integrated system was modeled using ZEMAX ray-tracing software to optimize the coupling into a 200 μm diameter fiber (NA 0.22). Key performance metrics include:
- Output Power: Achieved a record continuous output of 523 W.
- Efficiency: The system reached a 29% wall-plug efficiency and a 70% optical-to-optical conversion efficiency.
- Spectral Characteristics: The output is centered at 450.2 nm with a narrow FWHM of 4.8 nm, ensuring consistent material absorption.
Analysis of the power loss indicated that optical surface reflections (10.5%) and spatial "dead zones" (8%) remain the primary limiting factors for further efficiency gains.
Conclusion
This study successfully demonstrates a 500 W-class blue diode laser source suitable for direct metal processing. While this power level is a significant milestone, future work will focus on scaling the architecture to kilowatt levels and further improving brightness to enable even finer cutting and welding applications in the non-ferrous metal industry.
Summary updated