High-Performance Gas Sensor of Polyaniline/Carbon Nanotube Composites Promoted by Interface Engineering

Weiyu Zhang, Shuai Cao, Zhaofeng Wu, Min Zhang, Yali Cao, Jixi Guo, Furu Zhong, Haiming Duan, Dianzeng Jia2020 · DOI

TL;DR

Researchers have developed a novel hierarchical polyaniline/carbon nanotube (PANI/CNT) composite fiber that exhibits significantly enhanced sensitivity and faster response times for detecting NO2 and NH3 gases. By engineering the interface between PANI and CNTs and inducing a p-n transition in PANI, they've created a cost-effective, high-performance gas sensor with potential applications in air quality monitoring and the Internet of Things.

What Problem Does This Paper Address?

The increasing prevalence of the Internet of Things (IoT) and growing concerns about air quality necessitate the development of highly sensitive, selective, and fast-acting gas sensors. Nitrogen dioxide (NO2) and ammonia (NH3) are common atmospheric pollutants that pose health risks even at low concentrations, requiring real-time monitoring. While various nanomaterials have been explored for gas sensing, existing solutions often suffer from slow response/recovery times, limited sensitivity, or the use of environmentally harmful materials. This paper aims to address these limitations by creating a PANI/CNT composite with improved gas-sensing properties through careful interface engineering.

Methods

The core of this research lies in the preparation and characterization of hierarchical PANI/CNT composite fibers. The synthesis involves using carboxylated multi-walled carbon nanotubes (MWCNTs) as templates for the polymerization of aniline. A key step is the "interface engineering" achieved through a simple heat treatment at 80°C for 24 hours. This process induces a p-type to n-type transition in polyaniline (PANI), creating local p-n heterojunctions at the core-shell interface between the p-type MWCNTs and the now n-type PANI.

The materials were characterized using a suite of techniques:

  • FTIR and UV-vis spectroscopy: To analyze chemical structure and electronic properties.
  • X-ray photoelectron spectroscopy (XPS): To investigate elemental composition and chemical states.
  • Zeta potential measurements: To understand surface charge interactions during synthesis.
  • Transmission Electron Microscopy (TEM) and Scanning Electron Microscopy (SEM): To visualize the morphology and hierarchical structure of the synthesized materials.
  • Electrical conductivity measurements: To assess the electronic properties of the materials.

Gas sensing performance was evaluated using an electrochemical workstation. The response was defined as the change in electric current upon exposure to target gases, and response/recovery times were measured as the time taken to reach 90% and 10% of the response value, respectively.

Datasets

Not discussed in the paper. The paper focuses on the performance of the synthesized materials in a controlled laboratory environment with prepared gas mixtures.

Key Insights and Ideas

  • Interface Engineering is Key: The simple heat treatment to induce a p-type to n-type transition in PANI, creating p-n heterojunctions with MWCNTs, is a crucial innovation. This interface modification dramatically enhances gas sensing performance.
  • Hierarchical Structure Matters: The one-dimensional, core-shell hierarchical structure of the PANI/CNT fibers provides a large surface area and numerous pathways for gas diffusion, leading to faster interactions.
  • P-type vs. N-type Performance: Interestingly, the p-PANI/CNT composites showed higher sensitivity to NO2 (an oxidizing gas), while the n-PANI/CNT composites exhibited superior sensitivity to NH3 (a reducing gas). This suggests tunable sensing capabilities based on the PANI doping state.
  • Fast Response Times: The developed sensors achieve remarkably fast response and recovery times (as low as 1.8 seconds for response and 3.2 seconds for recovery), enabling near real-time detection.
  • Low Limit of Detection (LOD): The sensors demonstrate very low LODs for both NO2 (16.7 ppb) and NH3 (6.4 ppb), significantly below established exposure limits, making them suitable for practical applications.
  • Improved Stability: The heat-treated (n-type) samples showed better long-term stability over three months compared to their p-type counterparts.

Key Results

  • Sensitivity: p-PANI/CNT showed a response of 65.9 to 50 ppm NO2, significantly higher than p-PANI (10.3) and MWCNTs (3.6). n-PANI/CNT showed a response of 276.3 to 50 ppm NH3.
  • Response Time: p-PANI/CNT responded to 50 ppm NO2 in 5.2 seconds, and n-PANI/CNT responded to 50 ppm NH3 in 1.8 seconds.
  • Recovery Time: p-PANI/CNT recovered from 50 ppm NO2 in 3.2 seconds, and n-PANI/CNT recovered from 50 ppm NH3 in 4.6 seconds.
  • Limit of Detection (LOD): Estimated LOD for NO2 is 16.7 ppb, and for NH3 is 6.5 ppb.
  • Long-term Stability: After three months, the responses of p-PANI/CNT and n-PANI/CNT decreased by 19.1% and 11.2%, respectively, indicating good stability, especially for the n-type samples.
  • Selectivity: p-PANI/CNT demonstrated good selectivity towards NO2 and NH3 over other tested gases like O3, C2H6O, C3H6O, and CH2O. n-PANI/CNT showed less selectivity, responding to a broader range of gases.

Limitations and Future Work

  • Selectivity of n-PANI/CNT: While p-PANI/CNT shows good selectivity, the n-PANI/CNT exhibits a broader response to various gases, which could be a limitation for applications requiring highly specific detection.
  • Long-term Stability: While improved after heat treatment, a 19.1% decrease in response for p-PANI/CNT over three months suggests room for further improvement in long-term operational stability.
  • Future Work: The authors suggest that their work paves the way for developing cost-effective, high-performance PANI/CNT-based sensors. They also mention the potential for surface modification to create cross-response sensor arrays for multi-pollutant detection and the use of image recognition for large-data analysis of gaseous air pollutants. This implies future research could focus on optimizing selectivity, further enhancing stability, and exploring array-based sensing strategies.

Summary updated

BibTeX
@misc{zhang2020high,
  author = {Weiyu Zhang and Shuai Cao and Zhaofeng Wu and Min Zhang and Yali Cao and Jixi Guo and Furu Zhong and Haiming Duan and Dianzeng Jia},
  title = {{High-Performance Gas Sensor of Polyaniline/Carbon Nanotube Composites Promoted by Interface Engineering}},
  year = {2020},
  doi = {10.3390/s20010149},
}
Figure