Abstract
Superconducting quantum computers are manufactured using semiconductor processes that enable qubit integration. However, these qubits require high-performance, programmable arbitrary waveform generators (AWGs) to maintain fidelity and de-coherence times. This paper presents the implementation of an AWG featuring a 2 gigabit samples per second (GSPS) sampling rate and 16-bit vertical resolution. To address scalability, the AWG is integrated with separate microwave devices onto a single metal plate. A custom waveform sequence output controller was designed to realize seamless waveform switching. Experimental results demonstrate a channel-to-channel jitter of approximately 10ps and linearity within 2 LSB. Most notably, the qubit de-coherence time ($T_2^*$) achieved a 33% improvement compared to a commercial 1 GSPS, 14-bit AWG.
Introduction
Superconducting qubits are the fundamental building blocks of modern quantum processors, but their extreme sensitivity to environmental noise makes precise control a significant engineering challenge. To manipulate and read qubit states, researchers rely on microwave pulses generated by AWGs. As quantum systems scale from a few qubits to large-scale processors, two primary bottlenecks emerge: physical density and signal fidelity.
Commercial AWGs are often bulky and expensive, making them difficult to pack into the tight confines of a server rack alongside necessary microwave components like IQ mixers and filters. Furthermore, the 14-bit resolution common in many commercial units can introduce quantization noise that limits the qubit's de-coherence time ($T_2^*$). This research proposes a highly integrated, 16-bit AWG designed to fit within a standard 1U rack space while providing superior signal quality.
Hardware Architecture and Integration
The system architecture is centered around a Xilinx Field Programmable Gate Array (FPGA) and high-speed Digital-to-Analog Converters (DACs). The hardware stack utilizes a Xilinx MicroBlaze soft processor to manage communications via a gigabit Ethernet (TCP/IP) stack. To handle the massive data throughput required for 2 GSPS operation, the team implemented the JESD204B protocol, ensuring deterministic latency—a critical requirement for synchronizing pulses across multiple channels.
A key innovation in this design is the physical integration of the AWG and microwave "back-end." By mounting the AWG, filters, amplifiers, and IQ mixers onto a single metal plate, the researchers reduced signal loss and significantly improved the system's physical density. This integrated approach allows for a 1U form factor, providing a blueprint for managing the hundreds of control lines required for future large-scale quantum processors.
Custom Sequence Control
To enable complex quantum algorithms, the researchers developed a custom waveform sequence controller within the FPGA logic. This controller allows the system to "prefetch" the next waveform in a sequence, enabling seamless switching between different pulses without the delays often found in general-purpose hardware. This ensures that the quantum processor remains active and synchronized throughout the execution of a quantum circuit.
Experimental Results and Performance
The performance of the custom AWG was evaluated against standard commercial hardware, focusing on both electrical metrics and qubit performance:
- Coherence Improvement: The most significant result was the impact on the qubit's de-coherence time ($T_2^*$). Using the custom 16-bit AWG, $T_2^*$ reached 15 $\mu$s, representing a 33% improvement over the 10 $\mu$s achieved with a commercial 14-bit unit. This suggests that the higher vertical resolution effectively lowered the noise floor of the control signals.
- Signal Precision: The system demonstrated high linearity, with Integral Nonlinearity (INL) and Differential Nonlinearity (DNL) within 2 Least Significant Bits (LSB). The AWG exhibited 14 effective bits, offering a superior signal-to-noise ratio.
- Timing Accuracy: Channel-to-channel jitter was kept to approximately 10ps. While deterministic skew between channels (due to cable lengths) can reach 100ps, it is stable and can be calibrated out during system setup.
Conclusion
This work demonstrates that custom-designed control hardware can provide substantial benefits for superconducting quantum computing. By moving from 14-bit to 16-bit resolution and integrating microwave components directly with the AWG, the researchers achieved significant gains in qubit coherence and system scalability. Future work will focus on automating the calibration of inter-channel skew and investigating the thermal management challenges associated with running dozens of these units simultaneously in a high-density rack environment.
Summary updated