Abstract
Charge transport in conjugated polymer semiconductors has traditionally been thought to be limited to a low-mobility regime by pronounced energetic disorder. Much progress has recently been made in advancing carrier mobilities in field-effect transistors through developing low-disorder conjugated polymers. However, in diodes these polymers have to date not shown much improved mobilities, presumably reflecting the fact that in diodes lower carrier concentrations are available to fill up residual tail states in the density of states. Here, we show that the bulk charge transport in low-disorder polymers is limited by water-induced trap states and that their concentration can be dramatically reduced through incorporating small molecular additives into the polymer film. Upon incorporation of the additives we achieve space-charge limited current characteristics that resemble molecular single crystals such as rubrene with high, trap-free SCLC mobilities up to 0.2 cm²/Vs and a width of the residual tail state distribution comparable to kBT.
The Performance Gap in Polymer Diodes
Conjugated polymers are the backbone of flexible electronics, but they suffer from a frustrating performance gap. While these materials show high charge mobility in Field-Effect Transistors (FETs), their performance in diodes has historically been mediocre. The reason lies in carrier concentration: FETs operate at high concentrations, which "fill up" the energy traps (tail states) in the material. Diodes, however, operate at much lower carrier concentrations where charges get stuck in traps, leading to low mobility and poor device efficiency.
Identifying the Culprit: Water-Induced Traps
This paper challenges the assumption that diode performance is limited solely by structural disorder. Instead, the authors prove that the limit is often chemical impurities—specifically water—trapped within nanoscopic voids in the polymer film. These water molecules interact with polarons, hindering their movement and creating a "trap-limited" transport regime. This research demonstrates that the "disorder" limiting diode performance is often chemical rather than purely structural.
Molecular Additives as a Solution
The researchers employed a "molecular additive" strategy to tackle the trap problem. By incorporating small molecules (like 1,2-dichlorobenzene or F4MCTCNQ) into the polymer matrix, they occupied the "free volume" in the film, effectively displacing or passivating the water molecules. This transforms the transport from trap-limited to trap-free, allowing charges to move through the bulk of the material with minimal resistance.
Record-Breaking Mobility
Using the low-disorder polymer DPP-BTz with additives, the team achieved a record Space-Charge Limited Current (SCLC) mobility of 0.2 cm²/Vs. This represents a 500-fold increase over devices without additives. The $J-V$ characteristics show a textbook transition into a trap-free regime, mirroring the behavior of high-quality molecular single crystals like rubrene.
Conclusion
By neutralizing "hidden" water traps, this work demonstrates that conjugated polymers can achieve bulk mobilities comparable to single crystals. This strategy is universal for low-disorder polymers and provides a clear path toward high-performance organic diodes for flexible electronics, with devices showing exceptional stability over 10,000 measurement cycles.
Summary updated