High Lattice Match Growth of InAsSb Based Materials by Molecular Beam Epitaxy

Yang Ren, Ruiting Hao, Sijia Liu, Jie Guo, Guowei Wang, Yingqiang Xu, Zhichuan NiuChinese 2016 · DOI

Abstract

High lattice match growth of InAsSb based materials on GaSb substrates is demonstrated. The present results indicate that a stable substrate temperature and the optimal flux ratios are of critical importance in achieving a homogeneous InAsSb based material composition throughout the growth period. The quality of these epilayers is assessed using a high-resolution x-ray diffraction and atomic force microscope. The mismatch between the GaSb substrate and InAsSb alloy achieves almost zero, and the rms surface roughness of InAsSb alloy-achieves around 1.7 Å over an area of 28 μm × 28 μm. At the same time, the mismatches between GaSb and InAs/InAs0.73Sb0.27 superlattices (SLs) achieve approximately 100 arcsec (75 periods) and zero (300 periods), with the surface rms roughnesses of In As/InAs0.73Sb0.27 SLs around 1.8 Å (75 periods) and 2.1 Å (300 periods) over and area of 20 μm × 20 μm, respectively. After fabrication and characterization of the devices, the dynamic resistance of the n-barrier-n InAsSb photodetector near zero bias is of the order of 106 Ω·cm2. At 77K, the positive-intrinsic-negative photodetectors are demonstrated in InAsSb and InAs/InAsSb SL (75 periods) materials, exhibiting fifty-percent cutoff wavelengths of 3.8 μm, and 5.1 μm, respectively.
BibTeX
@inproceedings{ren2016high,
  author = {Yang Ren and Ruiting Hao and Sijia Liu and Jie Guo and Guowei Wang and Yingqiang Xu and Zhichuan Niu},
  title = {{High Lattice Match Growth of InAsSb Based Materials by Molecular Beam Epitaxy}},
  booktitle = {Chinese},
  year = {2016},
  doi = {10.1088/0256-307x/33/12/128101},
}

Loading related content...

Figure