High content 3D imaging by dual-view oblique plane microscopy

Hugh Sparks, Leo Rowe-Brown, Yuriy Alexandrov, Nils Gustafsson, Liuba Dvinskikh, Nathan Curry, Jayne Culley, Martin Lee, Alix Le Marois, Colin D.h. Ratcliffe, Thomas Phillips, Claudia Owczarek, Mar Arias-García, Montserrat Llanses Martinez, Theresa Suckert, Joffrey Pelletier, Carme Cortina, Wenzhi Hong, Edwin García, Zhizhen Xu, Shengjie Zhang, Giorgio Stassi, Eduard Batlle, Julien Colombelli, Maddy Parsons, Chris Bakal, Neil O. Carragher, Erik Sahai, Chris DunsbyPNAS 2025 · DOI

TL;DR

This paper introduces an improved dual-view oblique plane microscopy (dOPM) system that enables high-content, 3D imaging of biological samples with reduced photobleaching and high spatial resolution. The system achieves this by using a single objective for both illumination and detection, acquiring two views simultaneously, and then fusing them, making it a powerful tool for studying dynamic biological processes in complex environments.

What Problem Does This Paper Address?

Traditional light-sheet fluorescence microscopy (LSFM) offers advantages like reduced photobleaching and faster imaging compared to confocal microscopy. However, it typically requires separate objectives for illumination and detection, which can limit sample mounting options and introduce shadowing artifacts. Oblique Plane Microscopy (OPM) addresses this by using a single objective for both functions, but achieving isotropic resolution and efficient 3D imaging, especially for large sample arrays, remains a challenge. Specifically, OPM's axial resolution is often poorer than its lateral resolution, and acquiring multiple views to improve this can be complex. This paper tackles the need for a high-content, high-resolution 3D imaging technique that minimizes photobleaching, works with standard multi-well plate formats, and provides quantitative biological insights.

Methods

The core of this work is an enhanced dual-view oblique plane microscopy (dOPM) system. The key innovation is the use of a 60x/1.2NA water immersion objective as the primary objective for both excitation and detection. This system optically folds the light path to acquire two views simultaneously, which are then fused to improve the overall image quality and reduce artifacts. The authors meticulously characterized the system's performance by measuring spatial resolution (using fluorescent beads) and collection efficiency. They also developed a methodology to compare photobleaching in dOPM against traditional widefield epi-fluorescence imaging under conditions of equal detected signal. This allowed them to quantify the photobleaching advantage of dOPM. Furthermore, the system was adapted for multi-field-of-view (multi-FOV) imaging, enabling high-throughput screening in 96-well plates.

Datasets

The paper utilizes standard biological samples for evaluation, including:

  • 100 nm diameter fluorescent beads embedded in 3D agarose for spatial resolution measurements.
  • Fixed triple-negative breast cancer organoids (TNBC PDXOs) labeled for actin and DNA.
  • Live primary TNBC organoids embedded in collagen.
  • Ex vivo tumor xenografts in precision-cut lung slices.
  • Murine glioblastoma spheroids expressing FUCCI cell-cycle reporters.
  • Fixed breast cancer cells (MDA-MB-231, SUM159, MDA-MB-468) in 3D collagen.

No new benchmark datasets were introduced; rather, the system was applied to existing biological models to demonstrate its capabilities.

Key Insights and Ideas

  • Reduced Photobleaching is Significant: The dOPM system demonstrates substantially less photobleaching compared to widefield epi-fluorescence imaging when acquiring equivalent signal levels. This is crucial for long-term live-cell imaging and studying dynamic processes without damaging the sample.
  • Dual-View Fusion Improves Resolution: While individual views have limitations, fusing the two views significantly improves the overall 3D spatial resolution and isotropy, making it more comparable across all dimensions.
  • High-Content Imaging in Standard Formats: The ability to perform multi-FOV 3D imaging in 96-well plates opens doors for high-throughput screening and drug discovery, allowing researchers to study cellular responses in more biologically relevant 3D contexts.
  • Quantitative Biological Readouts: The system is capable of quantitative measurements, such as tracking organoid lumen dynamics, cell migration, and cell-cycle progression using FUCCI reporters, enabling precise dose-response studies.

Key Results

  • Spatial Resolution: For a 35° illumination angle, the fused dOPM system achieved a median bead FWHM of 0.29 µm (x), 0.31 µm (y), and 0.83 µm (z) over a 100x100x100 µm³ volume. Optical sectioning strength was measured between 2.45-3.00 µm.
  • Collection Efficiency: The relative collection efficiency of the dOPM system was measured to be 19-23% compared to widefield epi-fluorescence.
  • Photobleaching: The average percentage drop in signal over an experiment was 11% for dOPM versus 66% for widefield imaging, under conditions of equal detected signal.
  • Light Dose: The total light dose to the sample for dOPM was calculated to be approximately 9-11 times lower than for widefield imaging.
  • Biological Applications: The paper demonstrates successful time-lapse 3D imaging of organoid lumen dynamics, organoid migration, cell division tracking, and FUCCI-based cell-cycle analysis for drug dose-response curves in spheroids. It also showcases stage-scanned imaging for large-scale 3D cell analysis across multiple experimental conditions.

Limitations and Future Work

  • Collection Efficiency: The authors acknowledge that the dual-view OPM system has lower fluorescence collection efficiency compared to single-view OPM due to the polarizing beam splitter.
  • Resolution vs. Other Systems: While the spatial resolution is good, it is noted as being marginally lower than some specialized single-objective light-sheet systems, though dOPM offers a significantly larger axial range for this resolution.
  • Sample Complexity: The resolution measurements were performed on ideal fluorescent beads. Real biological samples will exhibit absorption, scattering, and refractive index variations that can affect image quality.
  • Future Work: The authors suggest the potential for adaptive optics to correct for sample-induced aberrations, further enhancing image quality, especially in complex biological samples. They also highlight the system's flexibility and potential for further optimization.

Summary updated

Abstract

Oblique plane microscopy (OPM) is a form of light-sheet fluorescence microscopy (LSFM) employing a single microscope objective at the sample for both fluorescence excitation and detection. Dual-view OPM (dOPM) is an optically folded form of OPM. We present an improved dOPM system employing a 60×/1.2NA water immersion primary objective and measure the spatial resolution and fluorescence collection efficiency for illumination angles of 35° and 45° with respect to the coverslip. Illumination at 35° provides slightly better lateral resolution and collection efficiency. Collection efficiency measurements are compared to a full vectorial raytracing simulation of the system. Using a light-sheet angle of 35°, the median bead FWHM for 100 nm diameter fluorescent beads in x, y, and z and the optical sectioning strength were measured over a volume of 100 × 100 × 100 μm<sup>3</sup> to be 0.29, 0.31, 0.83, and 2.45-3.00 μm, respectively when the two dOPM views are fused. We demonstrate less photobleaching in time-lapse dOPM of live mEmerald-expressing organoids compared to widefield epi-fluorescence z-stack imaging under the condition of equal detected fluorescence signal from a point object in focus. We demonstrate dOPM for multifield-of-view 3D imaging of biological samples in 96-well plates and apply it to imaging cells in collagen gel and quantifying the FUCCI cell-cycle reporter to provide drug dose-response curves in spheroids. We also use it to perform time-lapse multifield-of-view imaging and demonstrate the detection of organoid lumen closure and reopening, organoid migration within a collagen gel and observing dynamic events in arrays of ex vivo tissue slices.
BibTeX
@inproceedings{sparks2025high,
  author = {Hugh Sparks and Leo Rowe-Brown and Yuriy Alexandrov and Nils Gustafsson and Liuba Dvinskikh and Nathan Curry and Jayne Culley and Martin Lee and Alix Le Marois and Colin D.H. Ratcliffe and Thomas Phillips and Claudia Owczarek and Mar Arias-García and Montserrat Llanses Martinez and Theresa Suckert and Joffrey Pelletier and Carme Cortina and Wenzhi Hong and Edwin García and Zhizhen Xu and Shengjie Zhang and Giorgio Stassi and Eduard Batlle and Julien Colombelli and Maddy Parsons and Chris Bakal and Neil O. Carragher and Erik Sahai and Chris Dunsby},
  title = {{High content 3D imaging by dual-view oblique plane microscopy}},
  booktitle = {PNAS},
  year = {2025},
  doi = {10.1093/pnasnexus/pgaf370},
}
Figure