Heat Transfer Performance and Influencing Factors of Waste Tires During Pyrolysis in a Horizontal Rotary Furnace

Hongting Ma, Yang Bai, Shuo Ma, Zhipeng ZhouEnergies 2025 · DOI

TL;DR

This study investigates methods to improve the efficiency of waste tire pyrolysis in horizontal rotary furnaces, focusing on enhancing heat transfer to boost pyrolysis oil yield and reduce energy consumption. Researchers found that optimizing tire particle size, increasing furnace rotation speed, and incorporating heat transfer enhancement materials like carborundum or spiral fins significantly improve heat transfer performance and product distribution.

What Problem Does This Paper Address?

The global generation of waste tires presents a significant environmental challenge due to their non-biodegradability and the pollution associated with traditional disposal methods like landfilling and incineration. Pyrolysis offers a promising solution by converting waste tires into valuable products like gas, liquid fuels, and carbon black. However, a key bottleneck in current pyrolysis technologies, particularly in widely used horizontal rotary furnaces, is inefficient heat transfer. This leads to slow pyrolysis rates, high energy consumption, and suboptimal product yields, especially for valuable pyrolysis oil. This paper aims to address these limitations by systematically investigating factors that influence heat transfer efficiency and pyrolysis product distribution in horizontal rotary furnaces.

Methods

The researchers employed an experimental approach using a custom-built horizontal rotary pyrolysis furnace system. They systematically varied several parameters to assess their impact on heat transfer performance and product yield:

  • Particle Size: Waste tires were processed in four different sizes: powder (<0.1 cm), fine (0.3-2.1 cm), medium (1.0-2.3 cm), and coarse (2.0-3.0 cm).
  • Rotational Speed: The furnace rotation speed was varied at 1, 1.5, 2, and 3 rpm.
  • Heat Transfer Enhancement Materials: Carborundum, quartz sand, and white alundum were added to the waste tire mixture.
  • Spiral Fins: Spiral fins were installed on the outer wall of the inner cylinder of the pyrolysis furnace.

Heat transfer performance was quantified by calculating the apparent and comprehensive heat transfer coefficients. Pyrolysis product distribution (gas, oil, char) was determined by collecting and analyzing the output.

Datasets

Not discussed in the paper. The study relies on experimental data generated from the custom-built pyrolysis system.

Key Insights and Ideas

  • Particle Size Matters: Powdered waste tires lead to more uniform heating and better heat transfer, resulting in a higher proportion of liquid products. This is attributed to better contact and reduced thermal resistance.
  • Speed Up for Better Contact: Increasing the furnace's rotational speed beyond 2 rpm significantly improves heat transfer by ensuring better contact between the tire material and the furnace wall.
  • Material Matters for Heat Transfer: Incorporating materials with high thermal conductivity, such as carborundum and white alundum, substantially enhances heat transfer efficiency. This is due to improved conduction paths and potentially better thermal expansion matching.
  • Spiral Fins are a Game Changer: Adding spiral fins to the furnace wall dramatically boosts heat transfer, showing a significant increase in the comprehensive heat transfer coefficient. This suggests a highly effective way to improve furnace performance.
  • Optimizing for Oil Yield: The study identifies specific combinations of parameters that maximize pyrolysis oil yield, highlighting the potential for economic improvement in waste tire recycling.

Key Results

  • Optimal Particle Size: Powdered waste tires yielded the highest comprehensive heat transfer coefficient (12.78 W/(m²·K)) and the highest liquid product yield (44.7%).
  • Optimal Rotational Speed: A rotational speed of 3 rpm resulted in a comprehensive heat transfer coefficient of 12.78 W/(m²·K), with liquid product yields of 45.0% and 44.7% at 1.5 and 3 rpm, respectively.
  • Best Heat Transfer Materials: Carborundum and white alundum significantly improved heat transfer. Carborundum led to a comprehensive heat transfer coefficient of 13.53 W/(m²·K) and a liquid product yield of 46.1%.
  • Spiral Fin Impact: Installing spiral fins increased the comprehensive heat transfer coefficient by 27.7%, from 12.78 W/(m²·K) to 16.32 W/(m²·K).
  • Combined Optimization: The study found that a combination of 3 rpm rotation speed, powdered waste tires, and carborundum as an enhancement material yielded the highest overall heat transfer coefficient (16.89 W/(m²·K)) and a pyrolysis oil proportion of 46.1%.

Limitations and Future Work

The authors acknowledge that the conclusions drawn from this study are based on small-scale experimental equipment. They emphasize that these findings need to be verified through engineering practice before they can be widely promoted and applied. Future work could involve scaling up the optimized process and conducting pilot-scale or industrial-scale trials to validate the results and assess the economic feasibility of the proposed enhancements. Further investigation into the long-term performance and durability of the enhanced heat transfer materials and spiral fins would also be beneficial.

Summary updated

Abstract

Pyrolysis technology currently serves as a significant method for recycling and reducing waste tires. In this paper, in order to improve the heat transfer efficiency during the pyrolysis of waste tires in a horizontal rotary furnace and the yield of pyrolysis oil, the effect laws of tire particle size, rotary furnace rotation speed, enhanced heat transfer materials, and adding spiral fins on heat transfer performance and pyrolysis product distribution were studied, respectively. The innovation lies in two aspects: first, aiming at the problems of slow heat transfer and low pyrolysis efficiency in horizontal rotary furnaces, we identified technical measures through experiments to enhance heat transfer, thereby accelerating pyrolysis and reducing energy consumption; second, with the goal of increasing high-value pyrolysis oil yield, we determined optimal operating parameters to improve economic and sustainability outcomes. The results showed that powdered particles of waste tires were heated more evenly during the pyrolysis process, which increased the overall heat transfer coefficient and the proportion of liquid products. When the rotational speed of the rotary pyrolysis furnace exceeded 2 rpm, there was sufficient contact between the material and the furnace wall, which was beneficial to the improvement of heat transfer performance. Adding heat transfer enhancement materials such as carborundum and white alundum could improve the heat transfer performance between the pyrolysis furnace and the material. Notably, a rotational speed of 3 rpm and carborundum were used as a heat transfer enhancement material with powdered waste tire particles during the pyrolysis process; the overall heat transfer coefficient was the highest, which was 16.89 W/(m2·K), and the proportion of pyrolysis oil products was 46.1%. When spiral fins were installed, the comprehensive heat transfer coefficient was increased from 12.78 W/(m2·K) to 16.32 W/(m2·K). The experimental results show that by increasing the speed of the pyrolysis furnace, adding heat transfer enhancing materials with high thermal conductivity to waste tires, and appropriate particle size, the heat transfer performance and pyrolysis rate can be improved, and energy consumption can be reduced.
BibTeX
@inproceedings{ma2025heat,
  author = {Hongting Ma and Yang Bai and Shuo Ma and Zhipeng Zhou},
  title = {{Heat Transfer Performance and Influencing Factors of Waste Tires During Pyrolysis in a Horizontal Rotary Furnace}},
  booktitle = {Energies},
  year = {2025},
  doi = {10.3390/en18154028},
}
Figure