TL;DR
This paper investigates the harmonic and vibration characteristics of a dual three-phase permanent magnet synchronous motor (PMSM) when one of its phases experiences an open-circuit fault. By establishing a detailed magnetic field model and analyzing various fault-tolerant control strategies, the authors provide a method to predict motor performance and vibration under fault conditions, crucial for applications demanding high reliability.
What Problem Does This Paper Address?
Dual three-phase PMSMs offer advantages like higher power density and improved fault tolerance compared to traditional three-phase motors, making them attractive for demanding applications such as ship propulsion and electric vehicles. However, like any electrical machine, they are susceptible to winding faults, particularly open-circuit faults. These faults can lead to significant torque ripple, increased electromagnetic harmonics, and ultimately, unwanted vibrations and noise, compromising the motor's performance and lifespan. While fault-tolerant control strategies exist, understanding their impact on harmonic content and vibration is critical for designing robust systems. This paper aims to address this by providing a comprehensive analysis of harmonic and vibration behavior under different fault-tolerant control schemes when a single phase is open-circuited.
Methods
The authors employ a multi-faceted approach combining analytical modeling and finite element (FE) analysis.
- Subdomain Method (SM) for Magnetic Field Analysis: A detailed magnetic field model of the dual three-phase PMSM is established using the subdomain method. This method divides the motor into multiple structural domains (magnet, air gap, stator slot) and solves the magnetic field equations within each, offering a balance between accuracy and computational efficiency compared to full FE analysis.
- Fault-Tolerant Control Strategies: Four distinct operating conditions are simulated:
- No Fault Tolerant (NFT) Control: The motor operates without any specific control adjustments after the fault.
- Maximum Torque (MT) Control: Aims to maintain maximum torque output despite the fault.
- Minimum Copper Loss (MCL) Control: Focuses on minimizing energy losses in the windings.
- Single Three-Phase Mode (STPM) Control: The motor operates as a standard three-phase motor by deactivating one set of windings.
- Harmonic and Vibration Analysis:
- Torque and Electromagnetic Force Harmonics: Analyzed based on the magnetic field distribution under each control strategy.
- Electromagnetic Vibration: Predicted using a modal superposition method, considering the coupling between electromagnetic forces and the stator's structural dynamics.
- Model Verification: The accuracy of the analytical model is validated by comparing its results with those obtained from finite element analysis.
Datasets
Not discussed in the paper. The study relies on simulation and analytical modeling based on the motor's design parameters.
Key Insights and Ideas
- Asymmetric Currents Lead to Asymmetric Fields: An open-circuit fault in one phase, without fault-tolerant control, creates an asymmetric armature current. This asymmetry directly leads to an unbalanced magnetic field, including a negative sequence component, which is a primary driver of increased torque ripple and vibration.
- Fault-Tolerant Control Mitigates but Doesn't Eliminate Harmonics: While fault-tolerant strategies like MT and MCL aim to maintain torque output by redistributing currents, they don't eliminate harmonic content entirely. These strategies can introduce their own sets of harmonic components, which, though potentially less severe than in the NFT case, still contribute to vibration.
- Slotting is a Major Vibration Source: The analysis highlights that slotting in the motor's stator is a significant contributor to vibration, particularly at the slot frequency (96fr in this study). This effect is present across different control strategies.
- STPM Offers Simpler Harmonic Spectrum: The Single Three-Phase Mode (STPM) control, while potentially leading to higher amplitude vibration at certain frequencies (like 48fr), results in a simpler harmonic spectrum compared to MT and MCL. This simplicity might be advantageous for noise and vibration reduction if specific harmonic types are more problematic.
- Analytical Model's Effectiveness: The study successfully validates an analytical approach (SM combined with modal analysis) that can accurately predict motor harmonics and vibration, offering a computationally efficient alternative to full FE simulations for design and analysis.
Key Results
- NFT Control: Leads to significant torque ripple and vibration, with the 16fr harmonic being dominant.
- MT and MCL Control: These methods maintain torque output but generate a range of low-frequency harmonic components, contributing to vibration, though generally less than the slot frequency vibration.
- STPM Control: Produces a single dominant harmonic component at 48fr, which can be larger than harmonics from MT/MCL but offers a simpler harmonic profile.
- Vibration Frequencies: Key vibration frequencies identified include the slot frequency (96fr), and harmonics related to the electrical frequency (e.g., 16fr, 32fr, 48fr, 64fr). The natural frequency of the stator core also plays a role, amplifying vibration when excited by electromagnetic forces at or near resonance.
- Analytical vs. FEA: The analytical method's results for vibration acceleration were found to be in close agreement with FE method results, with a maximum relative error of around 5%, confirming the analytical model's accuracy.
Limitations and Future Work
- Sinusoidal Current Assumption: The analysis of fault-tolerant currents is based on sinusoidal waveforms. In practice, non-sinusoidal currents due to driver harmonics or other external factors can interact with these harmonics to produce greater vibration and noise.
- Focus on One-Phase Open Circuit: The study specifically addresses a single-phase open-circuit fault. Future work could explore the impact of multiple phase faults or short-circuit faults.
- Motor Design Optimization: While the paper identifies vibration sources, further research could focus on optimizing motor design (e.g., slot skewing) to further mitigate vibration and noise under fault conditions.
- Experimental Validation: While FEA validates the analytical model, direct experimental validation of the predicted vibration levels would strengthen the findings.
Summary updated