GSM Based Embedded Medical Critical Care Signal Monitoring System

Akash Kundu, Sumit Jaiswal, Prince kumar singhInternational Journal of Trend in Scientific Research and Development 2019

Introduction

In developing nations like India, a significant disparity exists between urban and rural healthcare infrastructure. While approximately 70% of the population resides in rural areas, these regions often lack basic Intensive Care Unit (ICU) facilities and specialized medical personnel. Patients in critical condition frequently face life-threatening delays during transport to urban centers. To address this "healthcare gap," researchers have developed a low-cost, portable, and GSM-enabled vital signs monitoring system designed for remote deployment.

System Architecture

The proposed system is built around the PIC18F4620 microcontroller, chosen for its balance of performance and power efficiency. The architecture integrates multiple biometric sensing modules with robust communication interfaces to ensure data can reach medical professionals regardless of the patient's location.

System block diagram of the GSM-enabled medical monitor.

The design prioritizes reliability in resource-constrained environments. It features dual communication paths: a GSM/GPRS (SIM900A) module for long-range SMS alerts and a Bluetooth (HC-05) module for local data transmission. Furthermore, the system is powered by a 12V lithium-ion battery supported by a solar-rechargeable circuit, ensuring functionality during the frequent power outages common in rural districts.

Sensor Implementation and Signal Conditioning

The device monitors five critical vital signs using non-invasive methods, including body temperature via a DS18B20 RTD thermistor, SpO2 and heart rate via transmittance oximetry, and respiratory rate via a thermocouple nose clip.

A key challenge in low-cost medical design is the linearization of non-linear sensor outputs. The system employs specific analog signal conditioning stages, including Wheatstone bridges and active filters to transform raw data into accurate medical readings.

Circuit diagram for sensor signal conditioning and linearization.

As shown in the circuit implementation, LM307 and LM324 operational amplifiers are used to amplify and filter raw signals. For instance, the temperature sensor data is linearized using the Steinhart-Hart equation within the firmware. For patient safety, the Non-Invasive Blood Pressure (NIBP) system includes a hardware-level "kill switch," allowing immediate cuff deflation if discomfort is detected, bypassing the microprocessor to prevent software-related failures.

Accessibility and User Interface

Recognizing the diverse needs of rural populations, the system includes specialized accessibility features. A Text-to-Speech (SP03) module provides auditory feedback for the hearing impaired, while the physical interface includes Braille-customized buttons for vision-impaired users. Data is displayed locally on a 20x4 LCD before being digitized into 12-bit words for remote transmission.

Conclusion and Future Directions

The prototype successfully demonstrates the integration of multiple medical instruments into a single, cost-effective unit. By utilizing GSM/SMS as the primary alert mechanism, the system remains functional even in areas with poor data connectivity.

Future work will focus on maturing the software stack, including the development of a secure, encrypted web interface for long-term data storage. Additionally, clinical validation on a broader patient demographic is required to transition this prototype into a certified medical-grade device suitable for widespread rural deployment.

Summary updated

BibTeX
@article{kundu2019gsm,
  author = {Akash Kundu and Sumit Jaiswal and Prince kumar singh},
  title = {{GSM Based Embedded Medical Critical Care Signal Monitoring System}},
  journal = {International Journal of Trend in Scientific Research and Development},
  year = {2019},
}
Figure