Growth of Tellurium Nanobelts on h-BN for p-type Transistors with Ultrahigh Hole Mobility

Peng Yang, Jiajia Zha, Guoyun Gao, Long Zheng, Haoxin Huang, Yunpeng Xia, Songcen Xu, Tengfei Xiong, Zhuomin Zhang, Zhengbao Yang, Ye Chen, Dong‐Keun Ki, Juin J. Liou, Wugang Liao, Chaoliang TanNano-Micro 2022 · DOI

TL;DR

Researchers have achieved a breakthrough in p-type electronics by growing high-quality single-crystalline Tellurium (Te) nanobelts directly onto hexagonal Boron Nitride (h-BN) flakes. The resulting field-effect transistors (FETs) boast a record-breaking room-temperature hole mobility of 1370 cm² V⁻¹ s⁻¹, significantly outperforming previous tellurium devices and even surpassing the air-unstable black phosphorus.

What Problem Does This Paper Address?

To create advanced integrated circuits (CMOS), engineers need both n-type (electron-carrying) and p-type (hole-carrying) transistors. While many high-performance n-type 2D materials exist (like $MoS_2$), finding a stable, high-mobility p-type counterpart has been a major bottleneck.

Black phosphorus (bP) offers high mobility but degrades almost immediately when exposed to air. Tellurium (Te) is a promising, air-stable alternative, but its performance has historically been limited by structural defects and "scattering centers" (impurities or roughness) at the interface between the Te and the standard silicon dioxide ($SiO_2$) substrates used in manufacturing.

Methods

The team employed a Substrate Engineering approach using Chemical Vapor Deposition (CVD):

  1. Growth Substrate: Instead of growing Te directly on $SiO_2$, they placed mechanically exfoliated flakes of hexagonal Boron Nitride (h-BN) onto the silicon wafer. h-BN is "atomically flat" and free of dangling bonds, providing a near-perfect surface for crystal growth.
  2. CVD Process: They used $TeO_2$ powder as a precursor, reducing it with a hydrogen/argon ($H_2/Ar$) gas mixture at temperatures between 750–800 °C.
  3. Characterization: The team used High-Resolution Transmission Electron Microscopy (HRTEM) to confirm the single-crystalline nature of the nanobelts and angle-resolved Raman spectroscopy to study their optical anisotropy.
  4. Device Fabrication: They built FETs in both global and local bottom-gate geometries to test electrical performance.

Datasets

As an experimental materials science paper, this work does not use standard computational datasets. Instead, the authors generated original experimental data:

  • Morphology data: AFM and SEM images of nanobelts (typically 30–70 nm thick).
  • Electrical statistics: Performance metrics for multiple devices (summarized in the paper’s Supporting Information, Tables S1 and S2), comparing Te grown on h-BN versus Te grown on bare $SiO_2$.

Key Insights and Ideas

  • The "Van der Waals" Advantage: Because h-BN lacks dangling bonds, it doesn't "trap" the Te atoms into a messy arrangement. This allows the Te molecular chains to align perfectly along the surface (the c-axis), resulting in fewer defects.
  • Reduced Scattering: In electronics, "scattering" is like friction for carriers. The ultra-flat h-BN surface reduces both surface-trap states and phonon scattering, allowing holes to zip through the Te channel with minimal resistance.
  • Morphology Control: The authors found that the growth is temperature-dependent. At lower temperatures, they get nanowires; at higher temperatures, the growth rates of different crystal orientations equalize, forming the desired rectangular nanobelts.
  • Reliability Matters: By calculating a "reliability factor" ($r_{in}$), the authors proved that their high mobility measurements at room temperature are physically sound and not an artifact of contact resistance.

Key Results

  • Record Mobility: The peak hole mobility reached 1370 cm² V⁻¹ s⁻¹ at room temperature. For context, the average mobility was ~1108 cm² V⁻¹ s⁻¹, which is still higher than the ~984 cm² V⁻¹ s⁻¹ typically reported for black phosphorus.
  • Substrate Impact: Te grown on bare $SiO_2$ only achieved a mobility of ~394 cm² V⁻¹ s⁻¹, proving that the h-BN substrate is responsible for a 3.5x performance boost.
  • Air Stability: Unlike black phosphorus, these Te devices maintained their performance after a week of exposure to ambient air without any encapsulation.
  • Cryogenic Performance: At 30 K, the mobility soared even higher to 3500 cm² V⁻¹ s⁻¹.

Limitations and Future Work

  • On/Off Ratio: The transistors have a relatively low on/off ratio (around $10^2$). This is largely because the Te nanobelts are somewhat thick (~30 nm), and the material has a narrow bandgap (~0.3 eV), making it difficult for the gate electrode to completely "shut off" the flow of current.
  • Scaling: While the results are impressive, the h-BN flakes were mechanically exfoliated (peeled by hand). For industrial use, this process would need to be transitioned to wafer-scale synthetic h-BN.
  • Future Direction: The authors suggest that moving to a dual-gate architecture could significantly improve the on/off ratio, making these nanobelts viable for complex logic gates and inverters.

Summary updated

Abstract

The lack of stable p-type van der Waals (vdW) semiconductors with high hole mobility severely impedes the step of low-dimensional materials entering the industrial circle. Although p-type black phosphorus (bP) and tellurium (Te) have shown promising hole mobilities, the instability under ambient conditions of bP and relatively low hole mobility of Te remain as daunting issues. Here we report the growth of high-quality Te nanobelts on atomically flat hexagonal boron nitride (h-BN) for high-performance p-type field-effect transistors (FETs). Importantly, the Te-based FET exhibits an ultrahigh hole mobility up to 1370 cm<sup>2</sup> V<sup>-1</sup> s<sup>-1</sup> at room temperature, that may lay the foundation for the future high-performance p-type 2D FET and metal-oxide-semiconductor (p-MOS) inverter. The vdW h-BN dielectric substrate not only provides an ultra-flat surface without dangling bonds for growth of high-quality Te nanobelts, but also reduces the scattering centers at the interface between the channel material and the dielectric layer, thus resulting in the ultrahigh hole mobility .
BibTeX
@inproceedings{yang2022growth,
  author = {Peng Yang and Jiajia Zha and Guoyun Gao and Long Zheng and Haoxin Huang and Yunpeng Xia and Songcen Xu and Tengfei Xiong and Zhuomin Zhang and Zhengbao Yang and Ye Chen and Dong‐Keun Ki and Juin J. Liou and Wugang Liao and Chaoliang Tan},
  title = {{Growth of Tellurium Nanobelts on h-BN for p-type Transistors with Ultrahigh Hole Mobility}},
  booktitle = {Nano-Micro},
  year = {2022},
  doi = {10.1007/s40820-022-00852-2},
}
Figure