Groundwater Flow Impact in Complex Karst Regions Considering Tunnel Construction Conditions: A Case Study of the New Construction Project at XLS Tunnel

Zhou Chen, Hong‐Tu Zhang, Qi Shen, Zihao Chen, Kai Wang, Changsheng ChenWater 2025 · DOI

TL;DR

This study presents a novel approach using MODFLOW to simulate groundwater flow impacts from tunnel construction in complex karst regions. By coupling specialized packages, they demonstrate that microfine cement grouting is highly effective in mitigating significant groundwater inflow and protecting sensitive springs, offering a valuable tool for sustainable infrastructure development.

What Problem Does This Paper Address?

Tunnel construction, especially in geologically complex areas like the karst regions of Southwest China, poses a significant threat to groundwater resources. These regions are characterized by intricate fault systems and karst conduits, making conventional methods for predicting groundwater impacts unreliable. Tunnel excavation can lead to reduced groundwater levels, diminished spring flow, and even land subsidence. Existing predictive methods often oversimplify these complex geological conditions, failing to capture the anisotropic and heterogeneous nature of karst aquifers. This gap hinders the ability to implement effective mitigation strategies, potentially leading to severe environmental consequences and impacting water resource security.

Methods

The researchers developed a three-dimensional groundwater flow model using the MODFLOW framework. The key innovation lies in the integration of two specialized MODFLOW packages:

  • STREAM package: This package is designed to simulate groundwater flow within karst conduit networks. It allows for the routing of water through these complex channel systems, preserving flow continuity and accounting for potential downstream re-entry into the aquifer. This is crucial for representing the interconnected nature of karst hydrology.
  • DRAIN package: This package simulates tunnel inflow by modeling the drainage effect of the tunnel. It allows water to discharge from the aquifer when the groundwater head exceeds a specified drain head, with the rate proportional to the head difference.

This coupled approach allows for a more realistic simulation of how tunnel excavation perturbs groundwater flow in heterogeneous karst environments. The model was calibrated against observed borehole water levels to ensure its reliability.

Datasets

The study utilized hydrogeological data from the XLS Tunnel project in Southwest China. This included:

  • Borehole data: Used to construct the 3D geological visualization model and constrain lithological stratification.
  • Field test data: Packer tests and injection tests were used to determine permeability parameters for various rock masses.
  • Observed borehole water levels: Used for model calibration and validation.
  • Hydrological station data: Provided information on precipitation patterns within the study area.
  • Groundwater Environmental Protection Targets (GEPTs): Identified springs and other sensitive points within the study area, with their locations mapped and their spatial relationship to the tunnel alignment analyzed.

Key Insights and Ideas

  • Karst complexity demands specialized modeling: The study highlights that traditional, simplified models are insufficient for predicting groundwater impacts in karst regions. The unique flow paths and heterogeneity require advanced numerical techniques like the STREAM package.
  • Grouting is a critical mitigation strategy: The research strongly emphasizes the effectiveness of grouting in reducing tunnel-induced groundwater impacts.
  • Microfine cement offers superior performance: While conventional cement grouting shows significant benefits, microfine cement grouting provides a more substantial reduction in water inflow and spring discharge depletion, especially in high-inflow zones.
  • Site-specific geological controls are paramount: The efficacy of grouting, particularly microfine cement, is heavily influenced by lithology and structural settings. Highly fractured limestone benefits most, while fault zones and low-permeability basalts/mudstones show more limited improvements.
  • Cost-benefit trade-offs are essential: While microfine cement is more expensive, its long-term benefits in reducing operational costs and protecting ecosystems can outweigh the initial investment, especially in water-sensitive areas.

Key Results

  • Natural conditions: Unlined tunnel excavation leads to substantial groundwater perturbations, with predicted inflows reaching up to 34,736 m³/d.
  • Conventional cement grouting: Reduced tunnel inflows by 27–97%, with over 90% reduction in shafts.
  • Microfine cement grouting: Achieved even greater reductions, 49–98%, particularly in high-inflow zones.
  • Spring discharge: Microfine cement grouting limited maximum spring discharge loss to ≤13.28%, with most springs experiencing less than 10% depletion. Conventional grouting reduced depletion to ≤28.56%.
  • Model validation: The model achieved satisfactory agreement with observed hydraulic heads, with low mean absolute residual (MAR) and root mean square error (RMSE) values.

Limitations and Future Work

  • Uncertainties in fault zones: The paper acknowledges that equivalent continuum parameters may not fully represent localized preferential flow in highly heterogeneous fault zones.
  • Future work suggestions: The authors suggest incorporating stochastic fracture generators or machine learning-based K-field ensembles to quantify prediction bounds and better address uncertainties in fault zones. Further research could also explore the integration of more advanced techniques for simulating complex karst conduit networks.

Summary updated

Abstract

Tunneling in structurally complex, tectonically active regions such as southwest China poses significant environmental risks to groundwater, especially in heterogeneous karst fault systems where conventional prediction methods often fail. This study innovatively coupled MODFLOW’s STREAM package (for simulating karst conduit networks) and DRAIN package (for tunnel inflow prediction) within a 3D groundwater model to assess hydrogeological impacts in complex mountainous terrain. The simulations show that an uncased tunnel lining causes significant groundwater changes under natural conditions, with predicted inflows reaching 34,736 m3/d. Conventional cement grouting (permeability: 1 × 10−5 cm/s; thickness: 10 m) mitigates the effects considerably and reduces the inflows in the tunnel sections by 27–97%. Microfine cement grouting (5 × 10−6 cm/s; 10 m thickness) further improves performance by achieving a 49–98% reduction in inflows and limiting the reduction in spring discharge to ≤13.28%. These results establish a valid theoretical framework for predicting groundwater impacts in heterogeneous terrain and demonstrate that targeted seepage control—particularly grouting with microfine cement—effectively protects groundwater-dependent ecosystems during infrastructure development.
BibTeX
@inproceedings{chen2025groundwater,
  author = {Zhou Chen and Hong‐Tu Zhang and Qi Shen and Zihao Chen and Kai Wang and Changsheng Chen and Kai Wang and Changsheng Chen},
  title = {{Groundwater Flow Impact in Complex Karst Regions Considering Tunnel Construction Conditions: A Case Study of the New Construction Project at XLS Tunnel}},
  booktitle = {Water},
  year = {2025},
  doi = {10.3390/w17162383},
}

Loading related content...

Figure