Abstract
To meet the urgent need for sub-second link establishment in inter-satellite and satellite-to-ground free space optical communication, this paper presents a periscope-type optical communication terminal and a ground-based verification scheme for its pointing accuracy and acquisition performance, thereby avoiding costly in-orbit tests. This ground-based measurement method takes the positions of stellar constellations in inertial space as its reference. By establishing a theoretical attitude determination model for the optical terminal and analyzing both structural and non-structural error sources that affect its pointing, it proposes an error-compensated, high-precision evaluation technique for open-loop pointing. Combined with laboratory component tests, it also derives a measurement method for acquisition time. Field experiments show that the mean pointing error is reduced from 2070.24 microrad to 120.16 microrad after error correction, corresponding to an improvement exceeding 94%. Acquisition tests report an average equivalent acquisition time of 0.908 s, with every run completed in under 1 s. These results demonstrate that the developed terminal achieves high-precision pointing and sub-second acquisition, and they validate the effectiveness of the proposed ground-based verification method.
What Problem Does This Paper Address?
Free-space optical communication (FSOC) is the "fiber optics of space," promising ultra-high-speed data links for satellites. However, it faces a massive "pointing" challenge. Laser beams are incredibly narrow (10–50 μrad), while the initial uncertainty of where a satellite is pointing is relatively huge (5–20 mrad).
Traditionally, establishing a link involves a slow "beacon scanning" process that can take tens of seconds—far too slow for modern satellite networks that need to switch links rapidly due to obstructions or orbital changes. Furthermore, verifying these systems usually requires expensive in-orbit tests because ground-based simulations often fail to replicate the precision needed for deep-space or inter-satellite environments.
Methods
The authors propose a two-pronged solution: a novel hardware architecture and a rigorous ground-based verification mathematical model.
Co-Boresight Periscope Architecture
Unlike traditional systems that use a separate star tracker, this terminal uses a periscope design where the star acquisition, transmission, and reception channels share the same optical path. This eliminates alignment errors between the "eyes" (star tracker) and the "mouth" (transmitter).
Stellar Reference Calibration and Error Compensation
The team used the Gaia star catalogue as an absolute benchmark. They developed a four-frame coordinate transformation model (Inertial, Local Horizontal, Body, and Pixel frames) to map star positions to the terminal's internal sensors. A two-stage error compensation strategy was employed:
- Parameter Calibration: Determining the camera's principal point and initial angle sensor readings.
- Pointing-Error Compensation: Using a least-squares fitting method to account for structural errors (like axis orthogonality and mirror installation tilts) and non-structural errors (Earth’s rotation and atmospheric refraction).
Key Results
The field experiments yielded impressive quantitative improvements:
- Pointing Accuracy: The mean open-loop pointing error was slashed from 2070.24 μrad to 120.16 μrad—a 94.2% improvement.
- Acquisition Speed: The system achieved an average equivalent acquisition time of 0.908 seconds. Crucially, every single test run was completed in under one second, meeting the "sub-second" requirement for next-generation satellite constellations.
- Model Convergence: The error-compensation model consistently converged regardless of the initial rotation axis angles, proving its stability for real-world deployment.
Limitations and Future Work
While this ground-based method is highly effective for calibrating the terminal itself, certain space-specific factors were excluded:
- Orbital Uncertainties: Ephemeris errors (uncertainty in the satellite's exact position) were not part of this study.
- Dynamic Platform Jitter: High-frequency micro-vibrations of a satellite platform in motion were not the focus.
- Thermal Deformation: The study does not explicitly model how extreme temperature gradients in space might warp the periscope structure.
Future work will likely involve integrating these terminals into networked architectures to test "handover" speeds between multiple moving targets.
Summary updated