Graphene-based Nanoscale Molecular Communication Receiver: Fabrication and Microfluidic Analysis

Murat Kuscu, Hamideh Ramezani, Ergin Dinc, Shahab Akhavan, Özgür B. AkanarXiv 2020 · arXiv

TL;DR

This paper presents the first fabrication and characterization of a nanoscale molecular communication (MC) receiver using graphene field-effect transistors (graphene bioFETs) integrated into a microfluidic system. This work establishes a practical testbed for developing realistic MC methods and demonstrates the potential of graphene-based sensors for reliable molecular data transmission, overcoming challenges in current MC research.

What Problem Does This Paper Address?

Molecular Communication (MC) is a promising paradigm for the Internet of Nano Things (IoNT), leveraging molecules to transmit information, especially in biological environments. However, current MC research heavily relies on theoretical models that make oversimplified assumptions due to the lack of practical micro/nanoscale MC devices and testbeds. This gap hinders the validation of these models and the development of reliable communication methods, as conventional communication tools struggle with the complex, nonlinear, and time-varying nature of molecular channels. This paper aims to bridge this gap by creating a functional, nanoscale MC receiver and a microfluidic system to experimentally investigate MC dynamics.

Methods

The core of this work involves the fabrication of a graphene bioFET-based MC receiver and its integration into a custom-designed microfluidic system. The fabrication process includes:

  • Graphene Field-Effect Transistor (GFET) Fabrication: Single-layer graphene (SLG) grown via CVD is transferred onto a Si/SiO2 substrate. This is followed by patterning of SLG channels using optical lithography and RIE etching.
  • Contact Deposition: Metal contacts (Cr and Au) for source and drain are deposited using thermal evaporation and lift-off.
  • Insulator Deposition: An Al2O3 layer is deposited via atomic layer deposition (ALD) to insulate contact areas from the electrolyte.
  • Microfluidic Channel Integration: A PDMS microfluidic channel is fabricated using a 3D-printed mold and bonded to the GFET. A Pt wire is integrated as a common solution gate.
  • Bio-functionalization: The SLG channels are functionalized with probe DNA (pDNA) molecules. This involves:
  • Immobilization of 1-Pyrenebutyric acid N-hydroxysuccinimide ester (PBASE) as a linker molecule via noncovalent π-π interaction.
  • Conjugation of amine-modified pDNAs to the PBASE linker.
  • Passivation of unbound PBASE with ethanolamine.
  • Microfluidic Setup: A pressure-regulated flow control system is used to precisely control fluid flow within the microfluidic channel for experiments.
  • Electrical Characterization: Transfer characteristics (Ids vs. Vg) are measured at different functionalization stages to analyze the device's electrical behavior and the impact of functionalization.
  • Sensing Response Measurement: The receiver's response to varying concentrations of complementary target DNA (tDNA) is measured.
  • Communication Performance Evaluation: Binary data transmission experiments are conducted by encoding information into tDNA concentration pulses, and the receiver's response is analyzed.

Datasets

Not discussed in the paper. The experiments utilize custom-fabricated devices and controlled flow of synthesized DNA solutions.

Key Insights and Ideas

  • Graphene as a Sensitive MC Receiver: Graphene bioFETs demonstrate high sensitivity to biochemical changes, making them excellent candidates for nanoscale MC receivers. Their electrical properties are significantly altered by the binding of target molecules.
  • DNA Hybridization as a Transduction Mechanism: The binding of complementary DNA strands (tDNA) to the immobilized probe DNA (pDNA) on the graphene surface leads to a measurable change in the drain-source current. This transduction is attributed to a combination of electrostatic gating and direct electron transfer.
  • Microfluidics for Controlled MC Environments: The custom-designed microfluidic system provides precise control over fluid flow, enabling realistic simulation of biological environments and controlled delivery of molecular information carriers.
  • Challenges of Intersymbol Interference (ISI): The slow kinetics of DNA hybridization and dissociation lead to significant intersymbol interference (ISI), which can complicate data decoding, especially at higher transmission rates.
  • Simple Difference-Based Detection: A straightforward difference-based detection method, comparing current measurements at the start and end of a bit interval, proves effective in mitigating ISI and achieving reliable data decoding.

Key Results

  • Successful Fabrication: The paper reports the first successful fabrication and characterization of a nanoscale graphene bioFET-based MC receiver.
  • Sensing Performance: The receiver exhibits a dose-dependent response to varying concentrations of target DNA, with a dissociation constant (KD) of 730 nM for pDNA-tDNA hybridization.
  • Specificity: The receiver demonstrates high specificity, with significantly lower responses to non-complementary DNA sequences, even those with single base-pair mismatches.
  • Data Transmission: Binary data transmission experiments show that the receiver can detect transmitted tDNA pulses. The response is well-fitted by an analytical model.
  • ISI Mitigation: A difference-based detection method achieves a low bit error rate (BER) of 5% for unfiltered signals and correctly decodes all transmitted bits for low-pass filtered signals.

Limitations and Future Work

  • Model Simplifications: The analytical model used for fitting the experimental data is an approximation and does not perfectly reconstruct the original signal, particularly during the dissociation phase. The LTI approximation in the model neglects the effect of previously transmitted bits.
  • ISI Impact: While a detection method is proposed to mitigate ISI, it remains a significant challenge, especially at higher transmission rates. The slow dissociation kinetics of DNA molecules are a primary cause.
  • Future Work: The authors suggest that the fabricated system can serve as an experimental testbed for probing intricate MC dynamics, developing novel communication techniques, transceiver architectures, and applications for MC. Further investigations into molecular dynamics simulations could provide deeper insights into the effects of flow, surface potential, and linker molecules on DNA behavior.

Summary updated

BibTeX
@misc{kuscu2020graphene,
  author = {Murat Kuscu and Hamideh Ramezani and Ergin Dinc and Shahab Akhavan and Özgür B. Akan},
  title = {{Graphene-based Nanoscale Molecular Communication Receiver: Fabrication and Microfluidic Analysis}},
  year = {2020},
  eprint = {2006.15470},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2006.15470},
}
Figure