Genetic Algorithm Workflow for Parameterization of a Water Model Using the Vashishta Force Field

Anthony Val Canillas Camposano, Even Marius Nordhagen, Henrik Andersen Sveinsson, Anders Malthe‐SørenssenThe Journal of Physical Chemistry B 2025 · DOI

TL;DR

This paper presents a new, computationally efficient water model based on the Vashishta potential, optimized using a genetic algorithm. This model accurately reproduces key thermodynamic, transport, and liquid-vapor properties of water, making it suitable for simulating complex mineral-water interactions, particularly those involving chemical reactions like hydrolysis.

What Problem Does This Paper Address?

Accurately simulating the behavior of water at mineral interfaces is crucial for understanding a wide range of natural phenomena, from geological processes like fracture to chemical reactions. While molecular dynamics (MD) simulations offer a powerful tool for this, existing water models often fall into two camps: those that are computationally cheap but too rigid to capture chemical reactions (like hydrolysis), and those that are more realistic but computationally expensive. This leaves a gap for a water model that is both computationally efficient and capable of describing reactive processes at mineral interfaces, especially for large-scale simulations. The authors aim to fill this gap by parameterizing the Vashishta potential, a form known for its computational efficiency and inherent ability to handle bond breaking and formation, for water.

Methods

The core of this work is a hierarchical genetic algorithm (HOGA) workflow designed to optimize the parameters of the Vashishta water potential. This process involves:

  • System Preparation: Building water systems for simulations and collecting experimental data for training.
  • Machine Learning (Global Optimization): A genetic algorithm (GA) is used to explore the vast parameter space. It starts with an initial population of parameter sets, iteratively refines them through selection, crossover, and mutation, aiming to minimize a "fitness" function that quantifies how well the model reproduces target properties.
  • Local Optimization: After the GA has identified promising parameter regions, a Nelder-Mead simplex algorithm is employed for finer refinement of the best-performing parameter sets.
  • Evaluation: The final optimized parameter set is tested against experimental data under conditions not used in the training set to assess its generalization capabilities.

The Vashishta potential itself is a flexible three-body potential that inherently allows for bond breaking and formation, unlike rigid water models that require additional constraint algorithms. This flexibility, combined with its relatively simple functional form, makes it computationally advantageous.

Datasets

The paper utilizes a comprehensive set of experimental data for training and evaluation, covering a wide range of thermodynamic conditions (temperature and pressure). These include:

  • Density and Self-Diffusion Coefficients: Data from NIST and Easteal et al. were used across various temperatures (273.15 K to 373 K) and pressures (1 bar to 3032 bar).
  • Radial Distribution Functions (RDFs): Used for fitting.
  • Hydronium (H₃O⁺) and Hydroxyl (OH⁻) Counts: To assess water's reactivity.
  • Surface Tension and Vapor Pressure: Data from NIST and other literature sources were used to evaluate liquid-vapor equilibrium properties.
  • Boiling Point and Critical Pressure: Used for fitting and evaluation.

The paper does not introduce new benchmark datasets but rather leverages existing, well-established experimental values.

Key Insights and Ideas

  • The Vashishta Potential's Promise: The Vashishta potential's inherent ability to handle bond breaking and formation without explicit constraints is a significant advantage for simulating reactive interfaces, offering a computational speedup over more complex reactive force fields.
  • Hierarchical Optimization is Key: The combination of a global GA search followed by local Nelder-Mead refinement is crucial for efficiently navigating the high-dimensional parameter space and finding optimal parameters that balance multiple, sometimes competing, properties.
  • Balancing Properties: The optimization process highlights the trade-offs involved. For instance, while the self-diffusion coefficient deviations were adjusted during local optimization, this improved the performance of other properties, demonstrating the need for a holistic approach to parameterization.
  • Bridging the Gap: This work successfully bridges the gap between computationally cheap, rigid water models and expensive, reactive models by providing a Vashishta-based water model that is both efficient and capable of describing chemical reactions.

Key Results

The newly parameterized Vashishta water model demonstrates good agreement with experimental data across a wide range of conditions:

  • Density: Within 1-2.5% deviation from experimental values at 1 bar and up to 3000 bar.
  • Self-Diffusion Coefficient: Generally within acceptable accuracy, though some deviations were observed at higher pressures, but it performs better than SPC/E at high pressures.
  • Surface Tension: Achieved a value of 54 ± 8 mN/m at 300 K, which is comparable to other popular water models and a significant improvement for the Vashishta form.
  • Vapor Pressure: Follows experimental trends and is comparable to TIP4P/2005 and SPC/E.
  • Water Reactivity: Hydronium formation is observed to be rare, consistent with experimental expectations, indicating the model's ability to capture this aspect of water's behavior.

Limitations and Future Work

  • Shear Viscosity Overestimation: The paper notes that shear viscosity is overestimated, which is consistent with the Stokes-Einstein relation given the underestimation of the self-diffusion coefficient.
  • Boiling Point Deviation: The model overestimates the boiling point by 23 K, though it performs slightly better than SPC/E in this regard.
  • Short-Range Nature: The authors acknowledge that the short-range nature of the Vashishta force field might impose limitations on reproducing certain thermodynamic properties, but this is a trade-off for enhanced computational efficiency.

Future Work:

  • Silica-Water Interface: The primary goal is to integrate this water model with existing silica potentials to simulate mineral-water interactions, including dissolution, friction, and stress corrosion.
  • Further Refinement: The HOGA algorithm can be further extended to include additional properties like dielectric constant, fluctuation-related properties, and liquid-solid properties.
  • Proton Dynamics: Inclusion of proton dynamics is suggested as a promising avenue for future refinement.
  • Parameter File Availability: The authors mention that the parameter set will be made available in the Supplementary Data, facilitating its use by the community.

Summary updated

Abstract

Water participates in countless processes on Earth, and the properties of mineral surfaces can be drastically changed in the presence of water. For example, the fracture toughness of silica glass is reduced by 25% for water-filled cracks than for dry cracks [<i>Geophys. Res.: Solid Earth</i> <b>2018</b>, <i>123</i>, 9341-9354]. An accurate description of water is therefore essential for modeling the behavior of minerals in aqueous environments and, in particular, for modeling dynamic processes such as fracture, where the mechanical response of water may play an important role. On the molecular scale, molecular dynamics simulations with empirical force field methods provide a way to study large molecular systems at a relatively low computational cost. Many water models have been developed previously; however, a computationally cheap water model capable of describing reactions with minerals is lacking. Here, we present a parametrization of the water potential using the Vashishta potential form [<i>Phys. Rev. B</i> <b>1990</b>, <i>41</i>, 12197-12209]. For this 3-point water model, we obtain good agreement with experimental transport and liquid-vapor properties. Importantly, the Vashishta form opens up compatibility with existing silica glass models, thus enabling the simulation of mineral-water interactions.
BibTeX
@article{camposano2025genetic,
  author = {Anthony Val Canillas Camposano and Even Marius Nordhagen and Henrik Andersen Sveinsson and Anders Malthe‐Sørenssen},
  title = {{Genetic Algorithm Workflow for Parameterization of a Water Model Using the Vashishta Force Field}},
  journal = {The Journal of Physical Chemistry B},
  year = {2025},
  doi = {10.1021/acs.jpcb.4c06389},
}
Figure