Generalized Lagrangian Heterogenous Multiscale Modeling of Complex Fluids

Nicolás Moreno, Marco ElleroarXiv 2022 · DOI · arXiv

Abstract

We introduce a full-Lagrangian heterogeneous multiscale method (LHMM) to model complex fluids with microscopic features that can extend over large spatio-temporal scales, such as polymeric solutions and multiphasic systems. The proposed approach discretizes the fluctuating Navier-Stokes equations in a particle-based setting using Smoothed Dissipative Particle Dynamics (SDPD). This multiscale method uses microscopic information derived on-the-fly to provide the stress tensor of the momentum balance in a macroscale problem, therefore bypassing the need for approximate constitutive relations for the stress. We exploit the intrinsic multiscale features of SDPD to account for thermal fluctuations as the characteristic size of the discretizing particles decrease. We validate the LHMM using different flow configurations (reverse Poiseuille flow, flow passing a cylinder array, and flow around a square cavity) and fluid (Newtonian and non-Newtonian). We showed the framework's flexibility to model complex fluids at the microscale using multiphase and polymeric systems. We showed that stresses are adequately captured and passed from micro to macro scales, leading to richer fluid response at the continuum. In general, the proposed methodology provides a natural link between variations at a macroscale, whereas accounting for memory effects of microscales.

Introduction

Modeling "complex fluids"—such as polymer solutions, blood, or emulsions—is notoriously difficult due to their history-dependent behavior. Standard fluid dynamics relies on constitutive equations to relate stress to strain, but for many complex fluids, these formulas are either unknown or fail to capture the fluid's "memory."

Existing multiscale methods often utilize fixed Eulerian grids at the macroscale. However, because fluid moves through these grid points, tracking the deformation history of specific fluid elements is challenging. This paper proposes a full-Lagrangian Heterogeneous Multiscale Method (LHMM) where macroscopic particles act as "sensors" that carry their own microscopic "laboratories" with them as they move, allowing for a seamless transition of history-dependent data across scales.

Comparison of Eulerian and Lagrangian multiscale approaches and the temporal scale separation.

Methodology

The LHMM employs a Lagrangian-Lagrangian approach using Smoothed Dissipative Particle Dynamics (SDPD). SDPD is a particle-based discretization of the fluctuating Navier-Stokes equations that accounts for thermal fluctuations, which are critical at microscopic scales.

The Coupling Loop

The framework operates through a bidirectional coupling loop:

  1. Macro-to-Micro: Each macroscopic particle calculates its local velocity gradient ($\nabla \mathbf{v}$), which is passed to a localized microscopic simulation as a boundary condition.
  2. Micro-Simulation: A representative volume of particles (e.g., polymers or droplets) is simulated under that specific deformation.
  3. Micro-to-Macro: The resulting stress tensor ($\boldsymbol{\tau}$) is calculated using the Irving-Kirkwood formula and returned to the macro-particle to update its motion.
Overview of the LHMM framework showing spatial coupling (a), algorithmic flow (b), and parallel implementation (c).

To ensure numerical stability, the authors introduce a hybrid formulation with a stabilizing parameter ($\epsilon$) that blends macroscopic Newtonian approximations with microscopic corrections, mitigating noise from the micro-simulations.

Validation and Key Results

The model was validated against benchmark flow configurations, including Reverse Poiseuille Flow (RPF) and flow past a cylinder array. These tests utilized various micro-models, such as FENE (Finitely Extensible Nonlinear Elastic) chains for oligomer melts and immiscible binary mixtures for two-phase flows.

  • History Capture: Because the macro-scale is particle-based, each particle naturally preserves its micro-state history. As a particle travels, its microscopic components "remember" past stretching, naturally capturing viscoelasticity without pre-defined formulas.
  • Non-Newtonian Effects: The LHMM successfully captured shear-thinning and normal stress differences in oligomer melts—phenomena that standard Newtonian CFD cannot represent.
  • Morphology Tracking: In multiphase flows, the model captured how droplets elongate into lamella-like structures under high shear, and how these microscopic changes directly altered macroscopic flow velocity.
  • Computational Efficiency: The framework demonstrated spatial gains ($G_s$) of up to $4 \times 10^6$, enabling large-scale simulations while performing expensive microscopic calculations on only a tiny fraction of the total volume.

Conclusion

The LHMM provides a natural link between macroscale variations and microscopic memory effects. By bypassing the need for approximate constitutive relations, the method allows complex fluid behavior to emerge purely from simulated microscopic interactions. While computationally more intensive than standard CFD, it is uniquely suited for problems where constitutive equations are unavailable. Future work will extend the framework to 3D systems and complex biological flows, such as blood modeling.

Summary updated

Abstract

We introduce a full-Lagrangian heterogeneous multiscale method (LHMM) to model complex fluids with microscopic features that can extend over large spatio-temporal scales, such as polymeric solutions and multiphasic systems. The proposed approach discretizes the fluctuating Navier-Stokes equations in a particle-based setting using Smoothed Dissipative Particle Dynamics (SDPD). This multiscale method uses microscopic information derived on-the-fly to provide the stress tensor of the momentum balance in a macroscale problem, therefore bypassing the need for approximate constitutive relations for the stress. We exploit the intrinsic multiscale features of SDPD to account for thermal fluctuations as the characteristic size of the discretizing particles decrease. We validate the LHMM using different flow configurations (reverse Poiseuille flow, flow passing a cylinder array, and flow around a square cavity) and fluid (Newtonian and non-Newtonian). We showed the framework's flexibility to model complex fluids at the microscale using multiphase and polymeric systems. We showed that stresses are adequately captured and passed from micro to macro scales, leading to richer fluid response at the continuum. In general, the proposed methodology provides a natural link between variations at a macroscale, whereas accounting for memory effects of microscales.
BibTeX
@misc{moreno2022generalized,
  author = {Nicolás Moreno and Marco Ellero},
  title = {{Generalized Lagrangian Heterogenous Multiscale Modeling of Complex Fluids}},
  year = {2022},
  eprint = {2211.05080},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2211.05080},
}

Loading related content...

Figure