GATE simulation of a new design of pinhole SPECT system for small animal brain imaging

Dilber Uzun Ozsahin, Lisa Bläckberg, Georges El Fakhri, Hamid SabetJournal of Instrumentation 2017 · DOI

Abstract

Small animal SPECT imaging has gained an increased interest over the past decade since it is an excellent tool for developing new drugs and tracers. Therefore, there is a huge effort on the development of cost-effective SPECT detectors with high capabilities. The aim of this study is to simulate the performance characteristics of new designs for a cost effective, stationary SPECT system dedicated to small animal imaging with a focus on mice brain. The conceptual design of this SPECT system platform, Stationary Small Animal SSA-SPECT, is to use many pixelated CsI:TI detector modules with 0.4 mm x 0.4 mm pixels in order to achieve excellent intrinsic detector resolution where each module is backed by a single pinhole collimator with 0.3 mm hole diameter. In this work, we present the simulation results of four variations of the SSA-SPECT platform where the number of detector modules and FOV size is varied while keeping the detector size and collimator hole size constant. Using the NEMA NU-4 protocol, we performed spatial resolution, sensitivity, image quality simulations followed by a Derenzo-like phantom evaluation. The results suggest that all four SSA-SPECT systems can provide better than 0.063% system sensitivity and < 1.5 mm FWHM spatial resolution without resolution recovery or other correction techniques. Specifically, SSA-SPECT-1 showed a system sensitivity of 0.09% in combination with 1.1 mm FWHM spatial resolution.
BibTeX
@article{ozsahin2017gate,
  author = {Dilber Uzun Ozsahin and Lisa Bläckberg and Georges El Fakhri and Hamid Sabet},
  title = {{GATE simulation of a new design of pinhole SPECT system for small animal brain imaging}},
  journal = {Journal of Instrumentation},
  year = {2017},
  doi = {10.1088/1748-0221/12/01/c01085},
}

Loading related content...

Figure