TL;DR
This paper presents a novel approach to real-time robotic control by implementing Neural Controllers (NCs) on low-cost FPGAs, trained to mimic expensive Nonlinear Model Predictive Controllers (NMPCs). This method achieves high-frequency control rates (up to 1kHz) and significantly reduces computational cost and latency, enabling faster and more precise robotic performance on both a cartpole and a F1TENTH race car.
What Problem Does This Paper Address?
Traditional model predictive control (MPC), particularly its nonlinear variant (NMPC), is a powerful technique for robotic control. However, NMPC involves solving complex optimization problems at each control step, making it computationally expensive and introducing significant latency. This computational burden limits its application in scenarios requiring very high control frequencies or when deployed on resource-constrained embedded systems. The authors aim to bridge this gap by replacing the computationally intensive NMPC with a lightweight, hardware-accelerated Neural Controller (NC) that learns to replicate NMPC's behavior through imitation learning.
Methods
The core of this work is the development and deployment of FPGA-based Neural Controllers (NCs). These NCs are implemented using Multilayer Perceptrons (MLPs) and are trained via supervised learning to imitate the control actions of an NMPC. The training data is generated by running an NMPC in simulation over a desired control horizon.
Key methodological aspects include:
- Hardware Acceleration: The NCs are synthesized and deployed onto an entry-level, low-power FPGA SoC (Zynq-7020). This allows for massive parallelization of computations, achieving microsecond inference times.
- Imitation Learning: The NCs learn by mimicking the NMPC's output. This approach bypasses the need for online optimization on the robot.
- Quantization-Aware Training: To fit the NCs onto the FPGA with limited resources, the authors utilize QKeras, a framework for training quantized neural networks. This involves specifying the precision of weights and activations during training.
- Pruning: For the more complex F1TENTH car NC, significant weight pruning was employed to achieve an 80% sparsity, further reducing the hardware resource requirements.
- hls4ml Framework: The paper leverages the hls4ml framework, an open-source toolchain designed for accelerating neural networks on FPGAs, particularly for particle physics applications.
- Sim2Real Transfer: The NCs are trained in simulation and then deployed on physical robots. The authors address potential Sim2Real mismatches by accounting for control delays in the training data generation.
Datasets
The paper does not introduce new benchmark datasets. Instead, it generates its own training data through simulations:
- Cartpole: Training data was generated by simulating the cartpole system and collecting state-action pairs from an NMPC controller.
- F1TENTH Car: Training data was collected from an NMPC controller running in a simulated F1TENTH Gym environment on the RCA1 track. This data was gathered for various speed factors to ensure robustness.
Key Insights and Ideas
- FPGA NCs as NMPC Replacements: The most significant insight is that lightweight, hardware-accelerated Neural Controllers can effectively replace computationally expensive NMPC controllers for real-time robotic control, especially when high frequencies are required.
- Latency Reduction is Key: The faster control rates afforded by FPGA NCs (kHz vs. 50Hz for NMPC) lead to demonstrably better performance, particularly in terms of quicker corrections and reduced error.
- Low-Cost Hardware Sufficiency: The work highlights that even inexpensive, low-power FPGA boards are capable of running complex MLPs with thousands of parameters at high frequencies, making advanced control accessible.
- Imitation Learning for Real-Time Control: Training NCs to imitate NMPC provides a practical pathway to achieve NMPC-like performance without the online computational burden.
- Generalization Capability: The F1TENTH NC demonstrated the ability to generalize and perform well on a track different from the one it was trained on, suggesting robustness.
Key Results
- Cartpole: The hardware NC achieved a 1kHz control rate, matching the NMPC's control performance in simulation and outperforming it in reality due to faster reaction times. The NC showed smaller pole errors and quicker responses to target position changes.
- F1TENTH Car (Simulation): The NC achieved lap times only 10% slower than the NMPC, with the smallest maximum distance error to the race line among all controllers (PP, NMPC, NC). The NC was 30% faster than the Pure Pursuit (PP) controller.
- F1TENTH Car (Physical): The hardware NC achieved lap times 20% quicker than the PP controller and tracked the race line more precisely. The NMPC could not be run in real-time on the physical car due to computational limitations.
- Power and Latency: The FPGA-based NCs consume very little power (e.g., 12mW for cartpole) and achieve inference times in microseconds, significantly outperforming traditional NMPC implementations.
Limitations and Future Work
- Sim2Real Mismatch: The authors acknowledge that Sim2Real model mismatch can degrade NC performance. They suggest domain randomization as a potential solution, a technique commonly used in reinforcement learning.
- Variable Physical Properties: Future work could explore training NCs to handle robots with variable physical properties (e.g., different pole lengths for the cartpole) by incorporating sufficient temporal context.
- Beyond MLPs: The framework is adaptable to other neural network architectures like RNNs, opening possibilities for more complex control tasks.
- State Estimation: For the F1TENTH car, the authors note that potential inaccuracies in the state estimation stack might have affected recorded trajectories in certain regions. Further improvements in state estimation could enhance performance.
- Slip Angle Measurement: For car control, the absence of direct slip angle measurement is a limitation. Future work could explore methods to infer or compensate for this missing information.
Summary updated