FPGA-Based Real-Time System for Demodulating FBG Wavelength

Peng Wang, Minglei Shao, Xu Han, Shanshan LiInternational Journal of Smart Home 2015 · DOI

TL;DR

This paper presents a real-time system for demodulating Fiber Bragg Grating (FBG) sensor wavelengths using an FPGA. By leveraging the high-speed processing capabilities of FPGAs and a tunable Fabry-Perot filter (TFPF) based optical setup, the system achieves high reliability, speed, and accuracy for FBG wavelength detection, making it suitable for practical engineering applications.

What Problem Does This Paper Address?

Fiber Bragg Gratings (FBGs) are valuable sensors due to their small size, light weight, high precision, and immunity to electromagnetic interference. However, accurately detecting the small shifts in their reflected wavelength is crucial for their effective utilization. Traditional methods can be slow or lack the precision required for real-time applications. This paper addresses the need for a high-speed, reliable, and accurate system for demodulating FBG wavelengths, particularly for practical engineering scenarios.

Methods

The core of the system is an FPGA (Field-Programmable Gate Array) that implements the digital logic for the demodulation process. The optical setup includes a broadband light source, a tunable Fabry-Perot filter (TFPF), reference gratings, a sensing grating array, and a photodetector (PD). The TFPF is scanned using a triangular wave signal generated by a Direct Digital Synthesis (DDS) module within the FPGA. The PD output, representing the FBG's reflected light, is sampled by an Analog-to-Digital Converter (ADC) and then processed by the FPGA.

Key FPGA modules include:

  • Resetting Unit: Ensures reliable asynchronous resetting and synchronous releasing of system components.
  • Phase-Locked Loop (PLL) Unit: Manages clock synchronization between different modules, reducing setup and delay times.
  • Key Detection Unit: Handles user input from physical keys, incorporating debouncing and edge detection for stable operation.
  • TFPF Driving Unit: Generates the triangular wave signal to drive the TFPF, with frequency adjustable via input keys.
  • FIR Filtering Unit: A low-pass Finite Impulse Response (FIR) filter is used to reduce noise in the sampled signal, improving accuracy.
  • Peak Clipping Unit: Optimizes the peak-searching algorithm by applying it only to data near the detected peak, reducing data processing and improving speed.
  • LCD Display Unit: Displays the demodulated FBG wavelength information using an ST7920 controller.

The system also incorporates a Digital-to-Analog Converter (DAC) to generate the driving signal for the TFPF and an ADC for sampling the photodetector's output.

Datasets

Not discussed in the paper. The system is designed for real-time measurement of FBG wavelengths, and experimental results are presented based on measurements against a commercial demodulator.

Key Insights and Ideas

  • FPGA for Real-Time Demodulation: The paper demonstrates the effectiveness of using an FPGA to implement complex digital logic for high-speed FBG wavelength demodulation, offering significant advantages in processing speed and programmability over traditional microcontrollers.
  • TFPF and DDS Synergy: The combination of a tunable Fabry-Perot filter for wavelength scanning and DDS for precise triangular wave generation allows for accurate and dynamic wavelength tracking.
  • Integrated Noise Reduction and Peak Detection: The use of FIR filtering to combat Gaussian white noise and a peak clipping unit to focus peak searching on relevant data segments are crucial for improving measurement accuracy and system speed.
  • High Reliability Design: The inclusion of robust resetting and PLL units, along with debounced key detection, contributes to the overall reliability and stability of the system, making it suitable for practical applications.

Key Results

The experimental results show that the developed FPGA-based real-time demodulation system for FBG wavelength has good measurement accuracy. The maximum error observed in the experimental results was 5 pm, which is considered acceptable for practical engineering applications. The system is described as having high reliability, speed, instantaneity, and programmability.

Limitations and Future Work

  • Limitations: The paper does not explicitly detail the limitations of the system, but the experimental results suggest a maximum error of 5 pm. The complexity of the FPGA design might also be a consideration for implementation.
  • Future Work: The paper implies that the system is ready for practical engineering applications. Further work could involve miniaturization, integration with more advanced sensor networks, or exploring different demodulation techniques for even higher precision or broader wavelength ranges.

Summary updated

BibTeX
@article{wang2015fpga,
  author = {Peng Wang and Minglei Shao and Xu Han and Shanshan Li},
  title = {{FPGA-Based Real-Time System for Demodulating FBG Wavelength}},
  journal = {International Journal of Smart Home},
  year = {2015},
  doi = {10.14257/ijsh.2015.9.6.10},
}
Figure