FPGA-based hybrid control method for high-precision positioning of bipedal stick–slip stepping piezoelectric actuators

Yifan Zhou, Lu Liu, Yue Zhang, R. Zhu, Yuhang Wu, Jiahui Duan, Ming KongMeasurement 2025 · DOI

Abstract

Abstract To mitigate the oscillations and backward motion exhibited by stick–slip piezoelectric actuators (PZTs) during operation and enhance their movement speed, this study proposes an field-programmable gate array (FPGA) based hybrid control method for high-precision positioning of bipedal stick–slip stepping PZTs. A composite control strategy is implemented to address hysteresis nonlinearity and achieve sub-micron positioning accuracy. First, a dynamic model integrating piezoelectric nonlinearity, compliant hinge dynamics, and friction effects is established to characterize the actuator’s motion. Second, the Classical-Prandtl–Ishlinskii model is adopted to describe hysteresis behavior, followed by constructing an inverse model to generate feedforward-compensated waveforms, which are output through a DAC controlled by the FPGA. Finally, to achieve dynamic error correction, the FPGA acquires real-time displacement feedback from the sensor via an ADC and dynamically outputs PID control parameters to adjust the driving waveform. Experimental results demonstrate that the compensated waveform improves single-step velocity by 26.9% compared to conventional sawtooth wave excitation. With closed-loop control, the system achieves a steady-state accuracy below 0.1 μm and a millisecond-level response time. This work presents an embedded control solution with high robustness and real-time performance, offering significant potential for applications in micro-electromechanical systems and ultra-precision positioning.
BibTeX
@inproceedings{zhou2025fpga,
  author = {Yifan Zhou and Lu Liu and Yue Zhang and R. Zhu and Yuhang Wu and Jiahui Duan and Ming Kong},
  title = {{FPGA-based hybrid control method for high-precision positioning of bipedal stick–slip stepping piezoelectric actuators}},
  booktitle = {Measurement},
  year = {2025},
  doi = {10.1088/1361-6501/ae1a01},
}

Loading related content...

Figure