Flexibility Resource Planning and Stability Optimization Methods for Power Systems with High Penetration of Renewable Energy

Haiteng Han, Xiangchen Jiang, Yang Cao, Xuanyao Luo, Sheng Liu, Bei YangEnergies 2025 · DOI

TL;DR

This paper tackles the challenge of integrating high levels of renewable energy into power grids by proposing a novel framework for planning and optimizing flexibility resources. It uses a bi-level optimization approach, incorporating risk assessment (CVaR) and a virtual network coupling method for network reconfiguration, to achieve cost-effective and resilient grid operations.

What Problem Does This Paper Address?

The increasing integration of renewable energy sources like solar and wind power into electricity grids presents a significant challenge. These sources are inherently variable and uncertain, leading to grid instability and making it difficult to balance supply and demand. Traditional grid management strategies struggle to cope with this volatility. This paper addresses the need for advanced methods to plan and optimize the use of "flexibility resources" – technologies and strategies that can quickly adjust power output or consumption – to ensure grid stability, reliability, and economic efficiency in the face of high renewable penetration and extreme weather events.

Methods

The authors propose a comprehensive framework built around a bi-level optimization model.

  • Upper Level (Planning): This layer focuses on the long-term investment decisions. It optimizes the siting and sizing of various flexibility resources, including microturbines (MTs), energy storage systems (ESSs), and soft open points (SOPs). A key innovation here is the integration of Conditional Value-at-Risk (CVaR) to quantify and manage risks associated with extreme weather and fault conditions, aiming to balance investment costs with operational risks.
  • Lower Level (Operation): This layer handles the real-time dispatch and operational strategies for the chosen flexibility resources. It coordinates demand response (DR), ESS charging/discharging, and dynamic network reconfiguration to ensure optimal grid operation under various scenarios.
  • Virtual Network Coupling: A novel approach is introduced to handle network reconfiguration. This method creates a virtual topological network that simplifies the enforcement of radiality constraints (ensuring no loops in the grid) while allowing for rapid topology adjustments to isolate faults and restore power.
  • Hybrid SA-PSO Algorithm: To efficiently solve the complex bi-level optimization problem, a hybrid Simulated Annealing (SA) and Particle Swarm Optimization (PSO) algorithm is employed for the upper-level planning. The lower-level operational subproblem is solved using conic programming.

Datasets

The study uses an improved IEEE 33-bus distribution network for its case study. Representative source-load time-series scenarios were generated by analyzing historical wind speed, solar irradiance, and load data. These were modeled using Weibull, Beta, and Gaussian distributions, coupled with a Copula function to capture dependencies. K-means clustering was used to group scenarios, and representative ones were selected for analysis.

Key Insights and Ideas

  • Coordinated Planning is Crucial: The paper strongly emphasizes that a holistic approach to planning multiple flexibility resources (generation, storage, grid devices, and demand-side management) is significantly more effective and cost-efficient than optimizing individual resources in isolation.
  • CVaR for Robustness: Incorporating CVaR into the planning process allows for a more realistic assessment of risks under extreme events, leading to more resilient grid configurations that can better withstand contingencies.
  • Virtual Network Coupling Simplifies Reconfiguration: This novel modeling technique effectively addresses the complexities of network reconfiguration, enabling faster fault isolation and power restoration while maintaining grid radiality.
  • Demand Response is a Powerful Tool: The study highlights the significant impact of demand response in smoothing load curves, reducing peak-valley differences, and consequently lowering the required capacity of other flexibility resources.

Key Results

  • Cost Reduction: Scheme 4, which includes all flexibility resources (MTs, ESSs, SOPs, and DR), achieved the lowest total system configuration cost, outperforming schemes with fewer resources by up to 41.6%.
  • Improved Resilience: The CVaR-based planning model resulted in significantly larger capacities for flexibility resources (e.g., ESS capacity increased by 25.9%), leading to a more resilient system that better handles contingencies.
  • Reduced Operating Costs: The CVaR-based model consistently reduced operating costs across various scenarios, especially in contingency conditions, by up to 36.1% compared to a risk-neutral approach.
  • Voltage Quality Enhancement: The integrated approach (Scheme 4) demonstrated superior voltage quality, maintaining voltages within a narrower fluctuation range compared to schemes with fewer flexibility resources.
  • Algorithm Efficiency: The hybrid SA-PSO algorithm provided a good balance between solution quality and computational efficiency, achieving optimal solutions within a reasonable number of iterations.

Limitations and Future Work

  • Fault Scenario Complexity: While the study considers representative fault scenarios, the authors suggest future work should extend the framework to incorporate more complex failure mechanisms, such as cascading outages and large-scale fault propagation.
  • Cost Modeling: The current cost modeling does not explicitly account for battery degradation. Future work could incorporate lifecycle-aware cost modeling, including battery degradation and replacement.
  • Scalability: While the SA-PSO algorithm shows good scalability, further research may explore reinforcement learning or mixed-integer SOCP to further improve the models scalability and adaptability in complex operational environments.

Summary updated

Abstract

With the accelerating global transition toward sustainable energy systems, power grids with a high share of renewable energy face increasing challenges due to volatility and uncertainty, necessitating advanced flexibility resource planning and stability optimization strategies. This paper presents a comprehensive distribution network planning framework that coordinates and integrates multiple types of flexibility resources through joint optimization and network reconfiguration to enhance system adaptability and operational resilience. A novel virtual network coupling modeling approach is proposed to address topological constraints during network reconfiguration, ensuring radial operation while allowing rapid topology adjustments to isolate faults and restore power supply. Furthermore, to mitigate the uncertainty and fault risks associated with extreme weather events, a CVaR-based risk quantification framework is incorporated into a bi-level optimization model, effectively balancing investment costs and operational risks under uncertainty. In this model, the upper-level planning stage optimizes the siting and sizing of flexibility resources, while the lower-level operational stage coordinates real-time dispatch strategies through demand response, energy storage operation, and dynamic network reconfiguration. Finally, a hybrid SA-PSO algorithm combined with conic programming is employed to enhance computational efficiency while ensuring high solution quality for practical system scales. Case study analyses demonstrate that, compared to single-resource configurations, the proposed coordinated planning of multiple flexibility resources can significantly reduce the total system cost and markedly improve system resilience under fault conditions.
BibTeX
@inproceedings{han2025flexibility,
  author = {Haiteng Han and Xiangchen Jiang and Yang Cao and Xuanyao Luo and Sheng Liu and Bei Yang},
  title = {{Flexibility Resource Planning and Stability Optimization Methods for Power Systems with High Penetration of Renewable Energy}},
  booktitle = {Energies},
  year = {2025},
  doi = {10.3390/en18154139},
}
Figure